1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 4 */ 5 6 #ifndef _CONFIG_SYNOLOGY_DS414_H 7 #define _CONFIG_SYNOLOGY_DS414_H 8 9 /* 10 * High Level Configuration Options (easy to change) 11 */ 12 13 /* 14 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 15 * for DDR ECC byte filling in the SPL before loading the main 16 * U-Boot into it. 17 */ 18 19 /* I2C */ 20 #define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 21 22 /* 23 * mv-common.h should be defined after CMD configs since it used them 24 * to enable certain macros 25 */ 26 #include "mv-common.h" 27 28 /* 29 * Memory layout while starting into the bin_hdr via the 30 * BootROM: 31 * 32 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 33 * 0x4000.4030 bin_hdr start address 34 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 35 * 0x4007.fffc BootROM stack top 36 * 37 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 38 * L2 cache thus cannot be used. 39 */ 40 41 /* SPL */ 42 /* Defines for SPL */ 43 44 /* Default Environment */ 45 46 #define CFG_EXTRA_ENV_SETTINGS \ 47 "initrd_high=0xffffffff\0" \ 48 "ramdisk_addr_r=0x8000000\0" \ 49 "usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \ 50 "ethmtu=1500\0eth1mtu=1500\0" \ 51 "update_uboot=sf probe; dhcp; " \ 52 "mw.b ${loadaddr} 0x0 0xd0000; " \ 53 "tftpboot ${loadaddr} u-boot-with-spl.kwb; " \ 54 "sf update ${loadaddr} 0x0 0xd0000\0" 55 56 57 /* increase autoneg timeout, my NIC sucks */ 58 #define PHY_ANEG_TIMEOUT 16000 59 60 #endif /* _CONFIG_SYNOLOGY_DS414_H */ 61