1 /* 2 * Copyright (c) Yann Collet, Facebook, Inc. 3 * All rights reserved. 4 * 5 * This source code is licensed under both the BSD-style license (found in the 6 * LICENSE file in the root directory of this source tree) and the GPLv2 (found 7 * in the COPYING file in the root directory of this source tree). 8 * You may select, at your option, one of the above-listed licenses. 9 */ 10 11 #ifndef ZSTD_H_235446 12 #define ZSTD_H_235446 13 14 /* ====== Dependency ======*/ 15 #include <linux/types.h> /* size_t */ 16 17 18 /* ===== ZSTDLIB_API : control library symbols visibility ===== */ 19 #ifndef ZSTDLIB_VISIBLE 20 # if (__GNUC__ >= 4) && !defined(__MINGW32__) 21 # define ZSTDLIB_VISIBLE __attribute__ ((visibility ("default"))) 22 # define ZSTDLIB_HIDDEN __attribute__ ((visibility ("hidden"))) 23 # else 24 # define ZSTDLIB_VISIBLE 25 # define ZSTDLIB_HIDDEN 26 # endif 27 #endif 28 #define ZSTDLIB_API ZSTDLIB_VISIBLE 29 30 31 /* ***************************************************************************** 32 Introduction 33 34 zstd, short for Zstandard, is a fast lossless compression algorithm, targeting 35 real-time compression scenarios at zlib-level and better compression ratios. 36 The zstd compression library provides in-memory compression and decompression 37 functions. 38 39 The library supports regular compression levels from 1 up to ZSTD_maxCLevel(), 40 which is currently 22. Levels >= 20, labeled `--ultra`, should be used with 41 caution, as they require more memory. The library also offers negative 42 compression levels, which extend the range of speed vs. ratio preferences. 43 The lower the level, the faster the speed (at the cost of compression). 44 45 Compression can be done in: 46 - a single step (described as Simple API) 47 - a single step, reusing a context (described as Explicit context) 48 - unbounded multiple steps (described as Streaming compression) 49 50 The compression ratio achievable on small data can be highly improved using 51 a dictionary. Dictionary compression can be performed in: 52 - a single step (described as Simple dictionary API) 53 - a single step, reusing a dictionary (described as Bulk-processing 54 dictionary API) 55 56 Advanced experimental functions can be accessed using 57 `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h. 58 59 Advanced experimental APIs should never be used with a dynamically-linked 60 library. They are not "stable"; their definitions or signatures may change in 61 the future. Only static linking is allowed. 62 *******************************************************************************/ 63 64 /*------ Version ------*/ 65 #define ZSTD_VERSION_MAJOR 1 66 #define ZSTD_VERSION_MINOR 5 67 #define ZSTD_VERSION_RELEASE 2 68 #define ZSTD_VERSION_NUMBER (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE) 69 70 /*! ZSTD_versionNumber() : 71 * Return runtime library version, the value is (MAJOR*100*100 + MINOR*100 + RELEASE). */ 72 ZSTDLIB_API unsigned ZSTD_versionNumber(void); 73 74 #define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE 75 #define ZSTD_QUOTE(str) #str 76 #define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str) 77 #define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION) 78 79 /*! ZSTD_versionString() : 80 * Return runtime library version, like "1.4.5". Requires v1.3.0+. */ 81 ZSTDLIB_API const char* ZSTD_versionString(void); 82 83 /* ************************************* 84 * Default constant 85 ***************************************/ 86 #ifndef ZSTD_CLEVEL_DEFAULT 87 # define ZSTD_CLEVEL_DEFAULT 3 88 #endif 89 90 /* ************************************* 91 * Constants 92 ***************************************/ 93 94 /* All magic numbers are supposed read/written to/from files/memory using little-endian convention */ 95 #define ZSTD_MAGICNUMBER 0xFD2FB528 /* valid since v0.8.0 */ 96 #define ZSTD_MAGIC_DICTIONARY 0xEC30A437 /* valid since v0.7.0 */ 97 #define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50 /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */ 98 #define ZSTD_MAGIC_SKIPPABLE_MASK 0xFFFFFFF0 99 100 #define ZSTD_BLOCKSIZELOG_MAX 17 101 #define ZSTD_BLOCKSIZE_MAX (1<<ZSTD_BLOCKSIZELOG_MAX) 102 103 104 /* ************************************* 105 * Simple API 106 ***************************************/ 107 /*! ZSTD_compress() : 108 * Compresses `src` content as a single zstd compressed frame into already allocated `dst`. 109 * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. 110 * @return : compressed size written into `dst` (<= `dstCapacity), 111 * or an error code if it fails (which can be tested using ZSTD_isError()). */ 112 ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity, 113 const void* src, size_t srcSize, 114 int compressionLevel); 115 116 /*! ZSTD_decompress() : 117 * `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames. 118 * `dstCapacity` is an upper bound of originalSize to regenerate. 119 * If user cannot imply a maximum upper bound, it's better to use streaming mode to decompress data. 120 * @return : the number of bytes decompressed into `dst` (<= `dstCapacity`), 121 * or an errorCode if it fails (which can be tested using ZSTD_isError()). */ 122 ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity, 123 const void* src, size_t compressedSize); 124 125 /*! ZSTD_getFrameContentSize() : requires v1.3.0+ 126 * `src` should point to the start of a ZSTD encoded frame. 127 * `srcSize` must be at least as large as the frame header. 128 * hint : any size >= `ZSTD_frameHeaderSize_max` is large enough. 129 * @return : - decompressed size of `src` frame content, if known 130 * - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined 131 * - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small) 132 * note 1 : a 0 return value means the frame is valid but "empty". 133 * note 2 : decompressed size is an optional field, it may not be present, typically in streaming mode. 134 * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. 135 * In which case, it's necessary to use streaming mode to decompress data. 136 * Optionally, application can rely on some implicit limit, 137 * as ZSTD_decompress() only needs an upper bound of decompressed size. 138 * (For example, data could be necessarily cut into blocks <= 16 KB). 139 * note 3 : decompressed size is always present when compression is completed using single-pass functions, 140 * such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict(). 141 * note 4 : decompressed size can be very large (64-bits value), 142 * potentially larger than what local system can handle as a single memory segment. 143 * In which case, it's necessary to use streaming mode to decompress data. 144 * note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified. 145 * Always ensure return value fits within application's authorized limits. 146 * Each application can set its own limits. 147 * note 6 : This function replaces ZSTD_getDecompressedSize() */ 148 #define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1) 149 #define ZSTD_CONTENTSIZE_ERROR (0ULL - 2) 150 ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize); 151 152 /*! ZSTD_getDecompressedSize() : 153 * NOTE: This function is now obsolete, in favor of ZSTD_getFrameContentSize(). 154 * Both functions work the same way, but ZSTD_getDecompressedSize() blends 155 * "empty", "unknown" and "error" results to the same return value (0), 156 * while ZSTD_getFrameContentSize() gives them separate return values. 157 * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */ 158 ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize); 159 160 /*! ZSTD_findFrameCompressedSize() : Requires v1.4.0+ 161 * `src` should point to the start of a ZSTD frame or skippable frame. 162 * `srcSize` must be >= first frame size 163 * @return : the compressed size of the first frame starting at `src`, 164 * suitable to pass as `srcSize` to `ZSTD_decompress` or similar, 165 * or an error code if input is invalid */ 166 ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize); 167 168 169 /*====== Helper functions ======*/ 170 #define ZSTD_COMPRESSBOUND(srcSize) ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0)) /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */ 171 ZSTDLIB_API size_t ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */ 172 ZSTDLIB_API unsigned ZSTD_isError(size_t code); /*!< tells if a `size_t` function result is an error code */ 173 ZSTDLIB_API const char* ZSTD_getErrorName(size_t code); /*!< provides readable string from an error code */ 174 ZSTDLIB_API int ZSTD_minCLevel(void); /*!< minimum negative compression level allowed, requires v1.4.0+ */ 175 ZSTDLIB_API int ZSTD_maxCLevel(void); /*!< maximum compression level available */ 176 ZSTDLIB_API int ZSTD_defaultCLevel(void); /*!< default compression level, specified by ZSTD_CLEVEL_DEFAULT, requires v1.5.0+ */ 177 178 179 /* ************************************* 180 * Explicit context 181 ***************************************/ 182 /*= Compression context 183 * When compressing many times, 184 * it is recommended to allocate a context just once, 185 * and re-use it for each successive compression operation. 186 * This will make workload friendlier for system's memory. 187 * Note : re-using context is just a speed / resource optimization. 188 * It doesn't change the compression ratio, which remains identical. 189 * Note 2 : In multi-threaded environments, 190 * use one different context per thread for parallel execution. 191 */ 192 typedef struct ZSTD_CCtx_s ZSTD_CCtx; 193 ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void); 194 ZSTDLIB_API size_t ZSTD_freeCCtx(ZSTD_CCtx* cctx); /* accept NULL pointer */ 195 196 /*! ZSTD_compressCCtx() : 197 * Same as ZSTD_compress(), using an explicit ZSTD_CCtx. 198 * Important : in order to behave similarly to `ZSTD_compress()`, 199 * this function compresses at requested compression level, 200 * __ignoring any other parameter__ . 201 * If any advanced parameter was set using the advanced API, 202 * they will all be reset. Only `compressionLevel` remains. 203 */ 204 ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx, 205 void* dst, size_t dstCapacity, 206 const void* src, size_t srcSize, 207 int compressionLevel); 208 209 /*= Decompression context 210 * When decompressing many times, 211 * it is recommended to allocate a context only once, 212 * and re-use it for each successive compression operation. 213 * This will make workload friendlier for system's memory. 214 * Use one context per thread for parallel execution. */ 215 typedef struct ZSTD_DCtx_s ZSTD_DCtx; 216 ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void); 217 ZSTDLIB_API size_t ZSTD_freeDCtx(ZSTD_DCtx* dctx); /* accept NULL pointer */ 218 219 /*! ZSTD_decompressDCtx() : 220 * Same as ZSTD_decompress(), 221 * requires an allocated ZSTD_DCtx. 222 * Compatible with sticky parameters. 223 */ 224 ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx, 225 void* dst, size_t dstCapacity, 226 const void* src, size_t srcSize); 227 228 229 /* ******************************************* 230 * Advanced compression API (Requires v1.4.0+) 231 **********************************************/ 232 233 /* API design : 234 * Parameters are pushed one by one into an existing context, 235 * using ZSTD_CCtx_set*() functions. 236 * Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame. 237 * "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` ! 238 * __They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()__ . 239 * 240 * It's possible to reset all parameters to "default" using ZSTD_CCtx_reset(). 241 * 242 * This API supersedes all other "advanced" API entry points in the experimental section. 243 * In the future, we expect to remove from experimental API entry points which are redundant with this API. 244 */ 245 246 247 /* Compression strategies, listed from fastest to strongest */ 248 typedef enum { ZSTD_fast=1, 249 ZSTD_dfast=2, 250 ZSTD_greedy=3, 251 ZSTD_lazy=4, 252 ZSTD_lazy2=5, 253 ZSTD_btlazy2=6, 254 ZSTD_btopt=7, 255 ZSTD_btultra=8, 256 ZSTD_btultra2=9 257 /* note : new strategies _might_ be added in the future. 258 Only the order (from fast to strong) is guaranteed */ 259 } ZSTD_strategy; 260 261 typedef enum { 262 263 /* compression parameters 264 * Note: When compressing with a ZSTD_CDict these parameters are superseded 265 * by the parameters used to construct the ZSTD_CDict. 266 * See ZSTD_CCtx_refCDict() for more info (superseded-by-cdict). */ 267 ZSTD_c_compressionLevel=100, /* Set compression parameters according to pre-defined cLevel table. 268 * Note that exact compression parameters are dynamically determined, 269 * depending on both compression level and srcSize (when known). 270 * Default level is ZSTD_CLEVEL_DEFAULT==3. 271 * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT. 272 * Note 1 : it's possible to pass a negative compression level. 273 * Note 2 : setting a level does not automatically set all other compression parameters 274 * to default. Setting this will however eventually dynamically impact the compression 275 * parameters which have not been manually set. The manually set 276 * ones will 'stick'. */ 277 /* Advanced compression parameters : 278 * It's possible to pin down compression parameters to some specific values. 279 * In which case, these values are no longer dynamically selected by the compressor */ 280 ZSTD_c_windowLog=101, /* Maximum allowed back-reference distance, expressed as power of 2. 281 * This will set a memory budget for streaming decompression, 282 * with larger values requiring more memory 283 * and typically compressing more. 284 * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX. 285 * Special: value 0 means "use default windowLog". 286 * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT 287 * requires explicitly allowing such size at streaming decompression stage. */ 288 ZSTD_c_hashLog=102, /* Size of the initial probe table, as a power of 2. 289 * Resulting memory usage is (1 << (hashLog+2)). 290 * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX. 291 * Larger tables improve compression ratio of strategies <= dFast, 292 * and improve speed of strategies > dFast. 293 * Special: value 0 means "use default hashLog". */ 294 ZSTD_c_chainLog=103, /* Size of the multi-probe search table, as a power of 2. 295 * Resulting memory usage is (1 << (chainLog+2)). 296 * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX. 297 * Larger tables result in better and slower compression. 298 * This parameter is useless for "fast" strategy. 299 * It's still useful when using "dfast" strategy, 300 * in which case it defines a secondary probe table. 301 * Special: value 0 means "use default chainLog". */ 302 ZSTD_c_searchLog=104, /* Number of search attempts, as a power of 2. 303 * More attempts result in better and slower compression. 304 * This parameter is useless for "fast" and "dFast" strategies. 305 * Special: value 0 means "use default searchLog". */ 306 ZSTD_c_minMatch=105, /* Minimum size of searched matches. 307 * Note that Zstandard can still find matches of smaller size, 308 * it just tweaks its search algorithm to look for this size and larger. 309 * Larger values increase compression and decompression speed, but decrease ratio. 310 * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX. 311 * Note that currently, for all strategies < btopt, effective minimum is 4. 312 * , for all strategies > fast, effective maximum is 6. 313 * Special: value 0 means "use default minMatchLength". */ 314 ZSTD_c_targetLength=106, /* Impact of this field depends on strategy. 315 * For strategies btopt, btultra & btultra2: 316 * Length of Match considered "good enough" to stop search. 317 * Larger values make compression stronger, and slower. 318 * For strategy fast: 319 * Distance between match sampling. 320 * Larger values make compression faster, and weaker. 321 * Special: value 0 means "use default targetLength". */ 322 ZSTD_c_strategy=107, /* See ZSTD_strategy enum definition. 323 * The higher the value of selected strategy, the more complex it is, 324 * resulting in stronger and slower compression. 325 * Special: value 0 means "use default strategy". */ 326 /* LDM mode parameters */ 327 ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching. 328 * This parameter is designed to improve compression ratio 329 * for large inputs, by finding large matches at long distance. 330 * It increases memory usage and window size. 331 * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB 332 * except when expressly set to a different value. 333 * Note: will be enabled by default if ZSTD_c_windowLog >= 128 MB and 334 * compression strategy >= ZSTD_btopt (== compression level 16+) */ 335 ZSTD_c_ldmHashLog=161, /* Size of the table for long distance matching, as a power of 2. 336 * Larger values increase memory usage and compression ratio, 337 * but decrease compression speed. 338 * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX 339 * default: windowlog - 7. 340 * Special: value 0 means "automatically determine hashlog". */ 341 ZSTD_c_ldmMinMatch=162, /* Minimum match size for long distance matcher. 342 * Larger/too small values usually decrease compression ratio. 343 * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX. 344 * Special: value 0 means "use default value" (default: 64). */ 345 ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution. 346 * Larger values improve collision resolution but decrease compression speed. 347 * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX. 348 * Special: value 0 means "use default value" (default: 3). */ 349 ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table. 350 * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN). 351 * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage. 352 * Larger values improve compression speed. 353 * Deviating far from default value will likely result in a compression ratio decrease. 354 * Special: value 0 means "automatically determine hashRateLog". */ 355 356 /* frame parameters */ 357 ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1) 358 * Content size must be known at the beginning of compression. 359 * This is automatically the case when using ZSTD_compress2(), 360 * For streaming scenarios, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */ 361 ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */ 362 ZSTD_c_dictIDFlag=202, /* When applicable, dictionary's ID is written into frame header (default:1) */ 363 364 /* multi-threading parameters */ 365 /* These parameters are only active if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD). 366 * Otherwise, trying to set any other value than default (0) will be a no-op and return an error. 367 * In a situation where it's unknown if the linked library supports multi-threading or not, 368 * setting ZSTD_c_nbWorkers to any value >= 1 and consulting the return value provides a quick way to check this property. 369 */ 370 ZSTD_c_nbWorkers=400, /* Select how many threads will be spawned to compress in parallel. 371 * When nbWorkers >= 1, triggers asynchronous mode when invoking ZSTD_compressStream*() : 372 * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller, 373 * while compression is performed in parallel, within worker thread(s). 374 * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end : 375 * in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call). 376 * More workers improve speed, but also increase memory usage. 377 * Default value is `0`, aka "single-threaded mode" : no worker is spawned, 378 * compression is performed inside Caller's thread, and all invocations are blocking */ 379 ZSTD_c_jobSize=401, /* Size of a compression job. This value is enforced only when nbWorkers >= 1. 380 * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads. 381 * 0 means default, which is dynamically determined based on compression parameters. 382 * Job size must be a minimum of overlap size, or ZSTDMT_JOBSIZE_MIN (= 512 KB), whichever is largest. 383 * The minimum size is automatically and transparently enforced. */ 384 ZSTD_c_overlapLog=402, /* Control the overlap size, as a fraction of window size. 385 * The overlap size is an amount of data reloaded from previous job at the beginning of a new job. 386 * It helps preserve compression ratio, while each job is compressed in parallel. 387 * This value is enforced only when nbWorkers >= 1. 388 * Larger values increase compression ratio, but decrease speed. 389 * Possible values range from 0 to 9 : 390 * - 0 means "default" : value will be determined by the library, depending on strategy 391 * - 1 means "no overlap" 392 * - 9 means "full overlap", using a full window size. 393 * Each intermediate rank increases/decreases load size by a factor 2 : 394 * 9: full window; 8: w/2; 7: w/4; 6: w/8; 5:w/16; 4: w/32; 3:w/64; 2:w/128; 1:no overlap; 0:default 395 * default value varies between 6 and 9, depending on strategy */ 396 397 /* note : additional experimental parameters are also available 398 * within the experimental section of the API. 399 * At the time of this writing, they include : 400 * ZSTD_c_rsyncable 401 * ZSTD_c_format 402 * ZSTD_c_forceMaxWindow 403 * ZSTD_c_forceAttachDict 404 * ZSTD_c_literalCompressionMode 405 * ZSTD_c_targetCBlockSize 406 * ZSTD_c_srcSizeHint 407 * ZSTD_c_enableDedicatedDictSearch 408 * ZSTD_c_stableInBuffer 409 * ZSTD_c_stableOutBuffer 410 * ZSTD_c_blockDelimiters 411 * ZSTD_c_validateSequences 412 * ZSTD_c_useBlockSplitter 413 * ZSTD_c_useRowMatchFinder 414 * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. 415 * note : never ever use experimentalParam? names directly; 416 * also, the enums values themselves are unstable and can still change. 417 */ 418 ZSTD_c_experimentalParam1=500, 419 ZSTD_c_experimentalParam2=10, 420 ZSTD_c_experimentalParam3=1000, 421 ZSTD_c_experimentalParam4=1001, 422 ZSTD_c_experimentalParam5=1002, 423 ZSTD_c_experimentalParam6=1003, 424 ZSTD_c_experimentalParam7=1004, 425 ZSTD_c_experimentalParam8=1005, 426 ZSTD_c_experimentalParam9=1006, 427 ZSTD_c_experimentalParam10=1007, 428 ZSTD_c_experimentalParam11=1008, 429 ZSTD_c_experimentalParam12=1009, 430 ZSTD_c_experimentalParam13=1010, 431 ZSTD_c_experimentalParam14=1011, 432 ZSTD_c_experimentalParam15=1012 433 } ZSTD_cParameter; 434 435 typedef struct { 436 size_t error; 437 int lowerBound; 438 int upperBound; 439 } ZSTD_bounds; 440 441 /*! ZSTD_cParam_getBounds() : 442 * All parameters must belong to an interval with lower and upper bounds, 443 * otherwise they will either trigger an error or be automatically clamped. 444 * @return : a structure, ZSTD_bounds, which contains 445 * - an error status field, which must be tested using ZSTD_isError() 446 * - lower and upper bounds, both inclusive 447 */ 448 ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam); 449 450 /*! ZSTD_CCtx_setParameter() : 451 * Set one compression parameter, selected by enum ZSTD_cParameter. 452 * All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds(). 453 * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). 454 * Setting a parameter is generally only possible during frame initialization (before starting compression). 455 * Exception : when using multi-threading mode (nbWorkers >= 1), 456 * the following parameters can be updated _during_ compression (within same frame): 457 * => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy. 458 * new parameters will be active for next job only (after a flush()). 459 * @return : an error code (which can be tested using ZSTD_isError()). 460 */ 461 ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value); 462 463 /*! ZSTD_CCtx_setPledgedSrcSize() : 464 * Total input data size to be compressed as a single frame. 465 * Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag. 466 * This value will also be controlled at end of frame, and trigger an error if not respected. 467 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 468 * Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame. 469 * In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN. 470 * ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame. 471 * Note 2 : pledgedSrcSize is only valid once, for the next frame. 472 * It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN. 473 * Note 3 : Whenever all input data is provided and consumed in a single round, 474 * for example with ZSTD_compress2(), 475 * or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end), 476 * this value is automatically overridden by srcSize instead. 477 */ 478 ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize); 479 480 typedef enum { 481 ZSTD_reset_session_only = 1, 482 ZSTD_reset_parameters = 2, 483 ZSTD_reset_session_and_parameters = 3 484 } ZSTD_ResetDirective; 485 486 /*! ZSTD_CCtx_reset() : 487 * There are 2 different things that can be reset, independently or jointly : 488 * - The session : will stop compressing current frame, and make CCtx ready to start a new one. 489 * Useful after an error, or to interrupt any ongoing compression. 490 * Any internal data not yet flushed is cancelled. 491 * Compression parameters and dictionary remain unchanged. 492 * They will be used to compress next frame. 493 * Resetting session never fails. 494 * - The parameters : changes all parameters back to "default". 495 * This removes any reference to any dictionary too. 496 * Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing) 497 * otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError()) 498 * - Both : similar to resetting the session, followed by resetting parameters. 499 */ 500 ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset); 501 502 /*! ZSTD_compress2() : 503 * Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API. 504 * ZSTD_compress2() always starts a new frame. 505 * Should cctx hold data from a previously unfinished frame, everything about it is forgotten. 506 * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() 507 * - The function is always blocking, returns when compression is completed. 508 * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. 509 * @return : compressed size written into `dst` (<= `dstCapacity), 510 * or an error code if it fails (which can be tested using ZSTD_isError()). 511 */ 512 ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx, 513 void* dst, size_t dstCapacity, 514 const void* src, size_t srcSize); 515 516 517 /* ********************************************* 518 * Advanced decompression API (Requires v1.4.0+) 519 ************************************************/ 520 521 /* The advanced API pushes parameters one by one into an existing DCtx context. 522 * Parameters are sticky, and remain valid for all following frames 523 * using the same DCtx context. 524 * It's possible to reset parameters to default values using ZSTD_DCtx_reset(). 525 * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream(). 526 * Therefore, no new decompression function is necessary. 527 */ 528 529 typedef enum { 530 531 ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which 532 * the streaming API will refuse to allocate memory buffer 533 * in order to protect the host from unreasonable memory requirements. 534 * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. 535 * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT). 536 * Special: value 0 means "use default maximum windowLog". */ 537 538 /* note : additional experimental parameters are also available 539 * within the experimental section of the API. 540 * At the time of this writing, they include : 541 * ZSTD_d_format 542 * ZSTD_d_stableOutBuffer 543 * ZSTD_d_forceIgnoreChecksum 544 * ZSTD_d_refMultipleDDicts 545 * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. 546 * note : never ever use experimentalParam? names directly 547 */ 548 ZSTD_d_experimentalParam1=1000, 549 ZSTD_d_experimentalParam2=1001, 550 ZSTD_d_experimentalParam3=1002, 551 ZSTD_d_experimentalParam4=1003 552 553 } ZSTD_dParameter; 554 555 /*! ZSTD_dParam_getBounds() : 556 * All parameters must belong to an interval with lower and upper bounds, 557 * otherwise they will either trigger an error or be automatically clamped. 558 * @return : a structure, ZSTD_bounds, which contains 559 * - an error status field, which must be tested using ZSTD_isError() 560 * - both lower and upper bounds, inclusive 561 */ 562 ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam); 563 564 /*! ZSTD_DCtx_setParameter() : 565 * Set one compression parameter, selected by enum ZSTD_dParameter. 566 * All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds(). 567 * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). 568 * Setting a parameter is only possible during frame initialization (before starting decompression). 569 * @return : 0, or an error code (which can be tested using ZSTD_isError()). 570 */ 571 ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value); 572 573 /*! ZSTD_DCtx_reset() : 574 * Return a DCtx to clean state. 575 * Session and parameters can be reset jointly or separately. 576 * Parameters can only be reset when no active frame is being decompressed. 577 * @return : 0, or an error code, which can be tested with ZSTD_isError() 578 */ 579 ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset); 580 581 582 /* ************************** 583 * Streaming 584 ****************************/ 585 586 typedef struct ZSTD_inBuffer_s { 587 const void* src; /*< start of input buffer */ 588 size_t size; /*< size of input buffer */ 589 size_t pos; /*< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */ 590 } ZSTD_inBuffer; 591 592 typedef struct ZSTD_outBuffer_s { 593 void* dst; /*< start of output buffer */ 594 size_t size; /*< size of output buffer */ 595 size_t pos; /*< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */ 596 } ZSTD_outBuffer; 597 598 599 600 /*-*********************************************************************** 601 * Streaming compression - HowTo 602 * 603 * A ZSTD_CStream object is required to track streaming operation. 604 * Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources. 605 * ZSTD_CStream objects can be reused multiple times on consecutive compression operations. 606 * It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory. 607 * 608 * For parallel execution, use one separate ZSTD_CStream per thread. 609 * 610 * note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing. 611 * 612 * Parameters are sticky : when starting a new compression on the same context, 613 * it will re-use the same sticky parameters as previous compression session. 614 * When in doubt, it's recommended to fully initialize the context before usage. 615 * Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(), 616 * ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to 617 * set more specific parameters, the pledged source size, or load a dictionary. 618 * 619 * Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to 620 * consume input stream. The function will automatically update both `pos` 621 * fields within `input` and `output`. 622 * Note that the function may not consume the entire input, for example, because 623 * the output buffer is already full, in which case `input.pos < input.size`. 624 * The caller must check if input has been entirely consumed. 625 * If not, the caller must make some room to receive more compressed data, 626 * and then present again remaining input data. 627 * note: ZSTD_e_continue is guaranteed to make some forward progress when called, 628 * but doesn't guarantee maximal forward progress. This is especially relevant 629 * when compressing with multiple threads. The call won't block if it can 630 * consume some input, but if it can't it will wait for some, but not all, 631 * output to be flushed. 632 * @return : provides a minimum amount of data remaining to be flushed from internal buffers 633 * or an error code, which can be tested using ZSTD_isError(). 634 * 635 * At any moment, it's possible to flush whatever data might remain stuck within internal buffer, 636 * using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated. 637 * Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0). 638 * In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush. 639 * You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the 640 * operation. 641 * note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will 642 * block until the flush is complete or the output buffer is full. 643 * @return : 0 if internal buffers are entirely flushed, 644 * >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), 645 * or an error code, which can be tested using ZSTD_isError(). 646 * 647 * Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame. 648 * It will perform a flush and write frame epilogue. 649 * The epilogue is required for decoders to consider a frame completed. 650 * flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush. 651 * You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to 652 * start a new frame. 653 * note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will 654 * block until the flush is complete or the output buffer is full. 655 * @return : 0 if frame fully completed and fully flushed, 656 * >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), 657 * or an error code, which can be tested using ZSTD_isError(). 658 * 659 * *******************************************************************/ 660 661 typedef ZSTD_CCtx ZSTD_CStream; /*< CCtx and CStream are now effectively same object (>= v1.3.0) */ 662 /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */ 663 /*===== ZSTD_CStream management functions =====*/ 664 ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void); 665 ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs); /* accept NULL pointer */ 666 667 /*===== Streaming compression functions =====*/ 668 typedef enum { 669 ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */ 670 ZSTD_e_flush=1, /* flush any data provided so far, 671 * it creates (at least) one new block, that can be decoded immediately on reception; 672 * frame will continue: any future data can still reference previously compressed data, improving compression. 673 * note : multithreaded compression will block to flush as much output as possible. */ 674 ZSTD_e_end=2 /* flush any remaining data _and_ close current frame. 675 * note that frame is only closed after compressed data is fully flushed (return value == 0). 676 * After that point, any additional data starts a new frame. 677 * note : each frame is independent (does not reference any content from previous frame). 678 : note : multithreaded compression will block to flush as much output as possible. */ 679 } ZSTD_EndDirective; 680 681 /*! ZSTD_compressStream2() : Requires v1.4.0+ 682 * Behaves about the same as ZSTD_compressStream, with additional control on end directive. 683 * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() 684 * - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode) 685 * - output->pos must be <= dstCapacity, input->pos must be <= srcSize 686 * - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit. 687 * - endOp must be a valid directive 688 * - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller. 689 * - When nbWorkers>=1, function is non-blocking : it copies a portion of input, distributes jobs to internal worker threads, flush to output whatever is available, 690 * and then immediately returns, just indicating that there is some data remaining to be flushed. 691 * The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte. 692 * - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking. 693 * - @return provides a minimum amount of data remaining to be flushed from internal buffers 694 * or an error code, which can be tested using ZSTD_isError(). 695 * if @return != 0, flush is not fully completed, there is still some data left within internal buffers. 696 * This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers. 697 * For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed. 698 * - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0), 699 * only ZSTD_e_end or ZSTD_e_flush operations are allowed. 700 * Before starting a new compression job, or changing compression parameters, 701 * it is required to fully flush internal buffers. 702 */ 703 ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx, 704 ZSTD_outBuffer* output, 705 ZSTD_inBuffer* input, 706 ZSTD_EndDirective endOp); 707 708 709 /* These buffer sizes are softly recommended. 710 * They are not required : ZSTD_compressStream*() happily accepts any buffer size, for both input and output. 711 * Respecting the recommended size just makes it a bit easier for ZSTD_compressStream*(), 712 * reducing the amount of memory shuffling and buffering, resulting in minor performance savings. 713 * 714 * However, note that these recommendations are from the perspective of a C caller program. 715 * If the streaming interface is invoked from some other language, 716 * especially managed ones such as Java or Go, through a foreign function interface such as jni or cgo, 717 * a major performance rule is to reduce crossing such interface to an absolute minimum. 718 * It's not rare that performance ends being spent more into the interface, rather than compression itself. 719 * In which cases, prefer using large buffers, as large as practical, 720 * for both input and output, to reduce the nb of roundtrips. 721 */ 722 ZSTDLIB_API size_t ZSTD_CStreamInSize(void); /*< recommended size for input buffer */ 723 ZSTDLIB_API size_t ZSTD_CStreamOutSize(void); /*< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block. */ 724 725 726 /* ***************************************************************************** 727 * This following is a legacy streaming API, available since v1.0+ . 728 * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2(). 729 * It is redundant, but remains fully supported. 730 * Streaming in combination with advanced parameters and dictionary compression 731 * can only be used through the new API. 732 ******************************************************************************/ 733 734 /*! 735 * Equivalent to: 736 * 737 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 738 * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) 739 * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); 740 */ 741 ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel); 742 /*! 743 * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue). 744 * NOTE: The return value is different. ZSTD_compressStream() returns a hint for 745 * the next read size (if non-zero and not an error). ZSTD_compressStream2() 746 * returns the minimum nb of bytes left to flush (if non-zero and not an error). 747 */ 748 ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input); 749 /*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */ 750 ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); 751 /*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */ 752 ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); 753 754 755 /*-*************************************************************************** 756 * Streaming decompression - HowTo 757 * 758 * A ZSTD_DStream object is required to track streaming operations. 759 * Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources. 760 * ZSTD_DStream objects can be re-used multiple times. 761 * 762 * Use ZSTD_initDStream() to start a new decompression operation. 763 * @return : recommended first input size 764 * Alternatively, use advanced API to set specific properties. 765 * 766 * Use ZSTD_decompressStream() repetitively to consume your input. 767 * The function will update both `pos` fields. 768 * If `input.pos < input.size`, some input has not been consumed. 769 * It's up to the caller to present again remaining data. 770 * The function tries to flush all data decoded immediately, respecting output buffer size. 771 * If `output.pos < output.size`, decoder has flushed everything it could. 772 * But if `output.pos == output.size`, there might be some data left within internal buffers., 773 * In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer. 774 * Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX. 775 * @return : 0 when a frame is completely decoded and fully flushed, 776 * or an error code, which can be tested using ZSTD_isError(), 777 * or any other value > 0, which means there is still some decoding or flushing to do to complete current frame : 778 * the return value is a suggested next input size (just a hint for better latency) 779 * that will never request more than the remaining frame size. 780 * *******************************************************************************/ 781 782 typedef ZSTD_DCtx ZSTD_DStream; /*< DCtx and DStream are now effectively same object (>= v1.3.0) */ 783 /* For compatibility with versions <= v1.2.0, prefer differentiating them. */ 784 /*===== ZSTD_DStream management functions =====*/ 785 ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void); 786 ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds); /* accept NULL pointer */ 787 788 /*===== Streaming decompression functions =====*/ 789 790 /* This function is redundant with the advanced API and equivalent to: 791 * 792 * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); 793 * ZSTD_DCtx_refDDict(zds, NULL); 794 */ 795 ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds); 796 797 ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input); 798 799 ZSTDLIB_API size_t ZSTD_DStreamInSize(void); /*!< recommended size for input buffer */ 800 ZSTDLIB_API size_t ZSTD_DStreamOutSize(void); /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */ 801 802 803 /* ************************ 804 * Simple dictionary API 805 ***************************/ 806 /*! ZSTD_compress_usingDict() : 807 * Compression at an explicit compression level using a Dictionary. 808 * A dictionary can be any arbitrary data segment (also called a prefix), 809 * or a buffer with specified information (see zdict.h). 810 * Note : This function loads the dictionary, resulting in significant startup delay. 811 * It's intended for a dictionary used only once. 812 * Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */ 813 ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx, 814 void* dst, size_t dstCapacity, 815 const void* src, size_t srcSize, 816 const void* dict,size_t dictSize, 817 int compressionLevel); 818 819 /*! ZSTD_decompress_usingDict() : 820 * Decompression using a known Dictionary. 821 * Dictionary must be identical to the one used during compression. 822 * Note : This function loads the dictionary, resulting in significant startup delay. 823 * It's intended for a dictionary used only once. 824 * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */ 825 ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx, 826 void* dst, size_t dstCapacity, 827 const void* src, size_t srcSize, 828 const void* dict,size_t dictSize); 829 830 831 /* ********************************* 832 * Bulk processing dictionary API 833 **********************************/ 834 typedef struct ZSTD_CDict_s ZSTD_CDict; 835 836 /*! ZSTD_createCDict() : 837 * When compressing multiple messages or blocks using the same dictionary, 838 * it's recommended to digest the dictionary only once, since it's a costly operation. 839 * ZSTD_createCDict() will create a state from digesting a dictionary. 840 * The resulting state can be used for future compression operations with very limited startup cost. 841 * ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only. 842 * @dictBuffer can be released after ZSTD_CDict creation, because its content is copied within CDict. 843 * Note 1 : Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate @dictBuffer content. 844 * Note 2 : A ZSTD_CDict can be created from an empty @dictBuffer, 845 * in which case the only thing that it transports is the @compressionLevel. 846 * This can be useful in a pipeline featuring ZSTD_compress_usingCDict() exclusively, 847 * expecting a ZSTD_CDict parameter with any data, including those without a known dictionary. */ 848 ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize, 849 int compressionLevel); 850 851 /*! ZSTD_freeCDict() : 852 * Function frees memory allocated by ZSTD_createCDict(). 853 * If a NULL pointer is passed, no operation is performed. */ 854 ZSTDLIB_API size_t ZSTD_freeCDict(ZSTD_CDict* CDict); 855 856 /*! ZSTD_compress_usingCDict() : 857 * Compression using a digested Dictionary. 858 * Recommended when same dictionary is used multiple times. 859 * Note : compression level is _decided at dictionary creation time_, 860 * and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */ 861 ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx, 862 void* dst, size_t dstCapacity, 863 const void* src, size_t srcSize, 864 const ZSTD_CDict* cdict); 865 866 867 typedef struct ZSTD_DDict_s ZSTD_DDict; 868 869 /*! ZSTD_createDDict() : 870 * Create a digested dictionary, ready to start decompression operation without startup delay. 871 * dictBuffer can be released after DDict creation, as its content is copied inside DDict. */ 872 ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize); 873 874 /*! ZSTD_freeDDict() : 875 * Function frees memory allocated with ZSTD_createDDict() 876 * If a NULL pointer is passed, no operation is performed. */ 877 ZSTDLIB_API size_t ZSTD_freeDDict(ZSTD_DDict* ddict); 878 879 /*! ZSTD_decompress_usingDDict() : 880 * Decompression using a digested Dictionary. 881 * Recommended when same dictionary is used multiple times. */ 882 ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx, 883 void* dst, size_t dstCapacity, 884 const void* src, size_t srcSize, 885 const ZSTD_DDict* ddict); 886 887 888 /* ****************************** 889 * Dictionary helper functions 890 *******************************/ 891 892 /*! ZSTD_getDictID_fromDict() : Requires v1.4.0+ 893 * Provides the dictID stored within dictionary. 894 * if @return == 0, the dictionary is not conformant with Zstandard specification. 895 * It can still be loaded, but as a content-only dictionary. */ 896 ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize); 897 898 /*! ZSTD_getDictID_fromCDict() : Requires v1.5.0+ 899 * Provides the dictID of the dictionary loaded into `cdict`. 900 * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. 901 * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ 902 ZSTDLIB_API unsigned ZSTD_getDictID_fromCDict(const ZSTD_CDict* cdict); 903 904 /*! ZSTD_getDictID_fromDDict() : Requires v1.4.0+ 905 * Provides the dictID of the dictionary loaded into `ddict`. 906 * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. 907 * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ 908 ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict); 909 910 /*! ZSTD_getDictID_fromFrame() : Requires v1.4.0+ 911 * Provides the dictID required to decompressed the frame stored within `src`. 912 * If @return == 0, the dictID could not be decoded. 913 * This could for one of the following reasons : 914 * - The frame does not require a dictionary to be decoded (most common case). 915 * - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information. 916 * Note : this use case also happens when using a non-conformant dictionary. 917 * - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`). 918 * - This is not a Zstandard frame. 919 * When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */ 920 ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize); 921 922 923 /* ***************************************************************************** 924 * Advanced dictionary and prefix API (Requires v1.4.0+) 925 * 926 * This API allows dictionaries to be used with ZSTD_compress2(), 927 * ZSTD_compressStream2(), and ZSTD_decompressDCtx(). Dictionaries are sticky, and 928 * only reset with the context is reset with ZSTD_reset_parameters or 929 * ZSTD_reset_session_and_parameters. Prefixes are single-use. 930 ******************************************************************************/ 931 932 933 /*! ZSTD_CCtx_loadDictionary() : Requires v1.4.0+ 934 * Create an internal CDict from `dict` buffer. 935 * Decompression will have to use same dictionary. 936 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 937 * Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary, 938 * meaning "return to no-dictionary mode". 939 * Note 1 : Dictionary is sticky, it will be used for all future compressed frames. 940 * To return to "no-dictionary" situation, load a NULL dictionary (or reset parameters). 941 * Note 2 : Loading a dictionary involves building tables. 942 * It's also a CPU consuming operation, with non-negligible impact on latency. 943 * Tables are dependent on compression parameters, and for this reason, 944 * compression parameters can no longer be changed after loading a dictionary. 945 * Note 3 :`dict` content will be copied internally. 946 * Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead. 947 * In such a case, dictionary buffer must outlive its users. 948 * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced() 949 * to precisely select how dictionary content must be interpreted. */ 950 ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); 951 952 /*! ZSTD_CCtx_refCDict() : Requires v1.4.0+ 953 * Reference a prepared dictionary, to be used for all next compressed frames. 954 * Note that compression parameters are enforced from within CDict, 955 * and supersede any compression parameter previously set within CCtx. 956 * The parameters ignored are labelled as "superseded-by-cdict" in the ZSTD_cParameter enum docs. 957 * The ignored parameters will be used again if the CCtx is returned to no-dictionary mode. 958 * The dictionary will remain valid for future compressed frames using same CCtx. 959 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 960 * Special : Referencing a NULL CDict means "return to no-dictionary mode". 961 * Note 1 : Currently, only one dictionary can be managed. 962 * Referencing a new dictionary effectively "discards" any previous one. 963 * Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */ 964 ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); 965 966 /*! ZSTD_CCtx_refPrefix() : Requires v1.4.0+ 967 * Reference a prefix (single-usage dictionary) for next compressed frame. 968 * A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end). 969 * Decompression will need same prefix to properly regenerate data. 970 * Compressing with a prefix is similar in outcome as performing a diff and compressing it, 971 * but performs much faster, especially during decompression (compression speed is tunable with compression level). 972 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 973 * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary 974 * Note 1 : Prefix buffer is referenced. It **must** outlive compression. 975 * Its content must remain unmodified during compression. 976 * Note 2 : If the intention is to diff some large src data blob with some prior version of itself, 977 * ensure that the window size is large enough to contain the entire source. 978 * See ZSTD_c_windowLog. 979 * Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters. 980 * It's a CPU consuming operation, with non-negligible impact on latency. 981 * If there is a need to use the same prefix multiple times, consider loadDictionary instead. 982 * Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dct_rawContent). 983 * Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */ 984 ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx, 985 const void* prefix, size_t prefixSize); 986 987 /*! ZSTD_DCtx_loadDictionary() : Requires v1.4.0+ 988 * Create an internal DDict from dict buffer, 989 * to be used to decompress next frames. 990 * The dictionary remains valid for all future frames, until explicitly invalidated. 991 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 992 * Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary, 993 * meaning "return to no-dictionary mode". 994 * Note 1 : Loading a dictionary involves building tables, 995 * which has a non-negligible impact on CPU usage and latency. 996 * It's recommended to "load once, use many times", to amortize the cost 997 * Note 2 :`dict` content will be copied internally, so `dict` can be released after loading. 998 * Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead. 999 * Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of 1000 * how dictionary content is loaded and interpreted. 1001 */ 1002 ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); 1003 1004 /*! ZSTD_DCtx_refDDict() : Requires v1.4.0+ 1005 * Reference a prepared dictionary, to be used to decompress next frames. 1006 * The dictionary remains active for decompression of future frames using same DCtx. 1007 * 1008 * If called with ZSTD_d_refMultipleDDicts enabled, repeated calls of this function 1009 * will store the DDict references in a table, and the DDict used for decompression 1010 * will be determined at decompression time, as per the dict ID in the frame. 1011 * The memory for the table is allocated on the first call to refDDict, and can be 1012 * freed with ZSTD_freeDCtx(). 1013 * 1014 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 1015 * Note 1 : Currently, only one dictionary can be managed. 1016 * Referencing a new dictionary effectively "discards" any previous one. 1017 * Special: referencing a NULL DDict means "return to no-dictionary mode". 1018 * Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx. 1019 */ 1020 ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); 1021 1022 /*! ZSTD_DCtx_refPrefix() : Requires v1.4.0+ 1023 * Reference a prefix (single-usage dictionary) to decompress next frame. 1024 * This is the reverse operation of ZSTD_CCtx_refPrefix(), 1025 * and must use the same prefix as the one used during compression. 1026 * Prefix is **only used once**. Reference is discarded at end of frame. 1027 * End of frame is reached when ZSTD_decompressStream() returns 0. 1028 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 1029 * Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary 1030 * Note 2 : Prefix buffer is referenced. It **must** outlive decompression. 1031 * Prefix buffer must remain unmodified up to the end of frame, 1032 * reached when ZSTD_decompressStream() returns 0. 1033 * Note 3 : By default, the prefix is treated as raw content (ZSTD_dct_rawContent). 1034 * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section) 1035 * Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost. 1036 * A full dictionary is more costly, as it requires building tables. 1037 */ 1038 ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, 1039 const void* prefix, size_t prefixSize); 1040 1041 /* === Memory management === */ 1042 1043 /*! ZSTD_sizeof_*() : Requires v1.4.0+ 1044 * These functions give the _current_ memory usage of selected object. 1045 * Note that object memory usage can evolve (increase or decrease) over time. */ 1046 ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx); 1047 ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx); 1048 ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs); 1049 ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds); 1050 ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict); 1051 ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict); 1052 1053 #endif /* ZSTD_H_235446 */ 1054 1055 1056 /* ************************************************************************************** 1057 * ADVANCED AND EXPERIMENTAL FUNCTIONS 1058 **************************************************************************************** 1059 * The definitions in the following section are considered experimental. 1060 * They are provided for advanced scenarios. 1061 * They should never be used with a dynamic library, as prototypes may change in the future. 1062 * Use them only in association with static linking. 1063 * ***************************************************************************************/ 1064 1065 #if !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY) 1066 #define ZSTD_H_ZSTD_STATIC_LINKING_ONLY 1067 1068 /* This can be overridden externally to hide static symbols. */ 1069 #ifndef ZSTDLIB_STATIC_API 1070 #define ZSTDLIB_STATIC_API ZSTDLIB_VISIBLE 1071 #endif 1072 1073 /* Deprecation warnings : 1074 * Should these warnings be a problem, it is generally possible to disable them, 1075 * typically with -Wno-deprecated-declarations for gcc or _CRT_SECURE_NO_WARNINGS in Visual. 1076 * Otherwise, it's also possible to define ZSTD_DISABLE_DEPRECATE_WARNINGS. 1077 */ 1078 #ifdef ZSTD_DISABLE_DEPRECATE_WARNINGS 1079 # define ZSTD_DEPRECATED(message) ZSTDLIB_STATIC_API /* disable deprecation warnings */ 1080 #else 1081 # if (defined(GNUC) && (GNUC > 4 || (GNUC == 4 && GNUC_MINOR >= 5))) || defined(__clang__) 1082 # define ZSTD_DEPRECATED(message) ZSTDLIB_STATIC_API __attribute__((deprecated(message))) 1083 # elif (__GNUC__ >= 3) 1084 # define ZSTD_DEPRECATED(message) ZSTDLIB_STATIC_API __attribute__((deprecated)) 1085 # else 1086 # pragma message("WARNING: You need to implement ZSTD_DEPRECATED for this compiler") 1087 # define ZSTD_DEPRECATED(message) ZSTDLIB_STATIC_API 1088 # endif 1089 #endif /* ZSTD_DISABLE_DEPRECATE_WARNINGS */ 1090 1091 /* ************************************************************************************** 1092 * experimental API (static linking only) 1093 **************************************************************************************** 1094 * The following symbols and constants 1095 * are not planned to join "stable API" status in the near future. 1096 * They can still change in future versions. 1097 * Some of them are planned to remain in the static_only section indefinitely. 1098 * Some of them might be removed in the future (especially when redundant with existing stable functions) 1099 * ***************************************************************************************/ 1100 1101 #define ZSTD_FRAMEHEADERSIZE_PREFIX(format) ((format) == ZSTD_f_zstd1 ? 5 : 1) /* minimum input size required to query frame header size */ 1102 #define ZSTD_FRAMEHEADERSIZE_MIN(format) ((format) == ZSTD_f_zstd1 ? 6 : 2) 1103 #define ZSTD_FRAMEHEADERSIZE_MAX 18 /* can be useful for static allocation */ 1104 #define ZSTD_SKIPPABLEHEADERSIZE 8 1105 1106 /* compression parameter bounds */ 1107 #define ZSTD_WINDOWLOG_MAX_32 30 1108 #define ZSTD_WINDOWLOG_MAX_64 31 1109 #define ZSTD_WINDOWLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64)) 1110 #define ZSTD_WINDOWLOG_MIN 10 1111 #define ZSTD_HASHLOG_MAX ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30) 1112 #define ZSTD_HASHLOG_MIN 6 1113 #define ZSTD_CHAINLOG_MAX_32 29 1114 #define ZSTD_CHAINLOG_MAX_64 30 1115 #define ZSTD_CHAINLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64)) 1116 #define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN 1117 #define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1) 1118 #define ZSTD_SEARCHLOG_MIN 1 1119 #define ZSTD_MINMATCH_MAX 7 /* only for ZSTD_fast, other strategies are limited to 6 */ 1120 #define ZSTD_MINMATCH_MIN 3 /* only for ZSTD_btopt+, faster strategies are limited to 4 */ 1121 #define ZSTD_TARGETLENGTH_MAX ZSTD_BLOCKSIZE_MAX 1122 #define ZSTD_TARGETLENGTH_MIN 0 /* note : comparing this constant to an unsigned results in a tautological test */ 1123 #define ZSTD_STRATEGY_MIN ZSTD_fast 1124 #define ZSTD_STRATEGY_MAX ZSTD_btultra2 1125 1126 1127 #define ZSTD_OVERLAPLOG_MIN 0 1128 #define ZSTD_OVERLAPLOG_MAX 9 1129 1130 #define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27 /* by default, the streaming decoder will refuse any frame 1131 * requiring larger than (1<<ZSTD_WINDOWLOG_LIMIT_DEFAULT) window size, 1132 * to preserve host's memory from unreasonable requirements. 1133 * This limit can be overridden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,). 1134 * The limit does not apply for one-pass decoders (such as ZSTD_decompress()), since no additional memory is allocated */ 1135 1136 1137 /* LDM parameter bounds */ 1138 #define ZSTD_LDM_HASHLOG_MIN ZSTD_HASHLOG_MIN 1139 #define ZSTD_LDM_HASHLOG_MAX ZSTD_HASHLOG_MAX 1140 #define ZSTD_LDM_MINMATCH_MIN 4 1141 #define ZSTD_LDM_MINMATCH_MAX 4096 1142 #define ZSTD_LDM_BUCKETSIZELOG_MIN 1 1143 #define ZSTD_LDM_BUCKETSIZELOG_MAX 8 1144 #define ZSTD_LDM_HASHRATELOG_MIN 0 1145 #define ZSTD_LDM_HASHRATELOG_MAX (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN) 1146 1147 /* Advanced parameter bounds */ 1148 #define ZSTD_TARGETCBLOCKSIZE_MIN 64 1149 #define ZSTD_TARGETCBLOCKSIZE_MAX ZSTD_BLOCKSIZE_MAX 1150 #define ZSTD_SRCSIZEHINT_MIN 0 1151 1152 1153 /* --- Advanced types --- */ 1154 1155 typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params; 1156 1157 typedef struct { 1158 unsigned int offset; /* The offset of the match. (NOT the same as the offset code) 1159 * If offset == 0 and matchLength == 0, this sequence represents the last 1160 * literals in the block of litLength size. 1161 */ 1162 1163 unsigned int litLength; /* Literal length of the sequence. */ 1164 unsigned int matchLength; /* Match length of the sequence. */ 1165 1166 /* Note: Users of this API may provide a sequence with matchLength == litLength == offset == 0. 1167 * In this case, we will treat the sequence as a marker for a block boundary. 1168 */ 1169 1170 unsigned int rep; /* Represents which repeat offset is represented by the field 'offset'. 1171 * Ranges from [0, 3]. 1172 * 1173 * Repeat offsets are essentially previous offsets from previous sequences sorted in 1174 * recency order. For more detail, see doc/zstd_compression_format.md 1175 * 1176 * If rep == 0, then 'offset' does not contain a repeat offset. 1177 * If rep > 0: 1178 * If litLength != 0: 1179 * rep == 1 --> offset == repeat_offset_1 1180 * rep == 2 --> offset == repeat_offset_2 1181 * rep == 3 --> offset == repeat_offset_3 1182 * If litLength == 0: 1183 * rep == 1 --> offset == repeat_offset_2 1184 * rep == 2 --> offset == repeat_offset_3 1185 * rep == 3 --> offset == repeat_offset_1 - 1 1186 * 1187 * Note: This field is optional. ZSTD_generateSequences() will calculate the value of 1188 * 'rep', but repeat offsets do not necessarily need to be calculated from an external 1189 * sequence provider's perspective. For example, ZSTD_compressSequences() does not 1190 * use this 'rep' field at all (as of now). 1191 */ 1192 } ZSTD_Sequence; 1193 1194 typedef struct { 1195 unsigned windowLog; /*< largest match distance : larger == more compression, more memory needed during decompression */ 1196 unsigned chainLog; /*< fully searched segment : larger == more compression, slower, more memory (useless for fast) */ 1197 unsigned hashLog; /*< dispatch table : larger == faster, more memory */ 1198 unsigned searchLog; /*< nb of searches : larger == more compression, slower */ 1199 unsigned minMatch; /*< match length searched : larger == faster decompression, sometimes less compression */ 1200 unsigned targetLength; /*< acceptable match size for optimal parser (only) : larger == more compression, slower */ 1201 ZSTD_strategy strategy; /*< see ZSTD_strategy definition above */ 1202 } ZSTD_compressionParameters; 1203 1204 typedef struct { 1205 int contentSizeFlag; /*< 1: content size will be in frame header (when known) */ 1206 int checksumFlag; /*< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */ 1207 int noDictIDFlag; /*< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */ 1208 } ZSTD_frameParameters; 1209 1210 typedef struct { 1211 ZSTD_compressionParameters cParams; 1212 ZSTD_frameParameters fParams; 1213 } ZSTD_parameters; 1214 1215 typedef enum { 1216 ZSTD_dct_auto = 0, /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */ 1217 ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */ 1218 ZSTD_dct_fullDict = 2 /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */ 1219 } ZSTD_dictContentType_e; 1220 1221 typedef enum { 1222 ZSTD_dlm_byCopy = 0, /*< Copy dictionary content internally */ 1223 ZSTD_dlm_byRef = 1 /*< Reference dictionary content -- the dictionary buffer must outlive its users. */ 1224 } ZSTD_dictLoadMethod_e; 1225 1226 typedef enum { 1227 ZSTD_f_zstd1 = 0, /* zstd frame format, specified in zstd_compression_format.md (default) */ 1228 ZSTD_f_zstd1_magicless = 1 /* Variant of zstd frame format, without initial 4-bytes magic number. 1229 * Useful to save 4 bytes per generated frame. 1230 * Decoder cannot recognise automatically this format, requiring this instruction. */ 1231 } ZSTD_format_e; 1232 1233 typedef enum { 1234 /* Note: this enum controls ZSTD_d_forceIgnoreChecksum */ 1235 ZSTD_d_validateChecksum = 0, 1236 ZSTD_d_ignoreChecksum = 1 1237 } ZSTD_forceIgnoreChecksum_e; 1238 1239 typedef enum { 1240 /* Note: this enum controls ZSTD_d_refMultipleDDicts */ 1241 ZSTD_rmd_refSingleDDict = 0, 1242 ZSTD_rmd_refMultipleDDicts = 1 1243 } ZSTD_refMultipleDDicts_e; 1244 1245 typedef enum { 1246 /* Note: this enum and the behavior it controls are effectively internal 1247 * implementation details of the compressor. They are expected to continue 1248 * to evolve and should be considered only in the context of extremely 1249 * advanced performance tuning. 1250 * 1251 * Zstd currently supports the use of a CDict in three ways: 1252 * 1253 * - The contents of the CDict can be copied into the working context. This 1254 * means that the compression can search both the dictionary and input 1255 * while operating on a single set of internal tables. This makes 1256 * the compression faster per-byte of input. However, the initial copy of 1257 * the CDict's tables incurs a fixed cost at the beginning of the 1258 * compression. For small compressions (< 8 KB), that copy can dominate 1259 * the cost of the compression. 1260 * 1261 * - The CDict's tables can be used in-place. In this model, compression is 1262 * slower per input byte, because the compressor has to search two sets of 1263 * tables. However, this model incurs no start-up cost (as long as the 1264 * working context's tables can be reused). For small inputs, this can be 1265 * faster than copying the CDict's tables. 1266 * 1267 * - The CDict's tables are not used at all, and instead we use the working 1268 * context alone to reload the dictionary and use params based on the source 1269 * size. See ZSTD_compress_insertDictionary() and ZSTD_compress_usingDict(). 1270 * This method is effective when the dictionary sizes are very small relative 1271 * to the input size, and the input size is fairly large to begin with. 1272 * 1273 * Zstd has a simple internal heuristic that selects which strategy to use 1274 * at the beginning of a compression. However, if experimentation shows that 1275 * Zstd is making poor choices, it is possible to override that choice with 1276 * this enum. 1277 */ 1278 ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */ 1279 ZSTD_dictForceAttach = 1, /* Never copy the dictionary. */ 1280 ZSTD_dictForceCopy = 2, /* Always copy the dictionary. */ 1281 ZSTD_dictForceLoad = 3 /* Always reload the dictionary */ 1282 } ZSTD_dictAttachPref_e; 1283 1284 typedef enum { 1285 ZSTD_lcm_auto = 0, /*< Automatically determine the compression mode based on the compression level. 1286 * Negative compression levels will be uncompressed, and positive compression 1287 * levels will be compressed. */ 1288 ZSTD_lcm_huffman = 1, /*< Always attempt Huffman compression. Uncompressed literals will still be 1289 * emitted if Huffman compression is not profitable. */ 1290 ZSTD_lcm_uncompressed = 2 /*< Always emit uncompressed literals. */ 1291 } ZSTD_literalCompressionMode_e; 1292 1293 typedef enum { 1294 /* Note: This enum controls features which are conditionally beneficial. Zstd typically will make a final 1295 * decision on whether or not to enable the feature (ZSTD_ps_auto), but setting the switch to ZSTD_ps_enable 1296 * or ZSTD_ps_disable allow for a force enable/disable the feature. 1297 */ 1298 ZSTD_ps_auto = 0, /* Let the library automatically determine whether the feature shall be enabled */ 1299 ZSTD_ps_enable = 1, /* Force-enable the feature */ 1300 ZSTD_ps_disable = 2 /* Do not use the feature */ 1301 } ZSTD_paramSwitch_e; 1302 1303 /* ************************************* 1304 * Frame size functions 1305 ***************************************/ 1306 1307 /*! ZSTD_findDecompressedSize() : 1308 * `src` should point to the start of a series of ZSTD encoded and/or skippable frames 1309 * `srcSize` must be the _exact_ size of this series 1310 * (i.e. there should be a frame boundary at `src + srcSize`) 1311 * @return : - decompressed size of all data in all successive frames 1312 * - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN 1313 * - if an error occurred: ZSTD_CONTENTSIZE_ERROR 1314 * 1315 * note 1 : decompressed size is an optional field, that may not be present, especially in streaming mode. 1316 * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. 1317 * In which case, it's necessary to use streaming mode to decompress data. 1318 * note 2 : decompressed size is always present when compression is done with ZSTD_compress() 1319 * note 3 : decompressed size can be very large (64-bits value), 1320 * potentially larger than what local system can handle as a single memory segment. 1321 * In which case, it's necessary to use streaming mode to decompress data. 1322 * note 4 : If source is untrusted, decompressed size could be wrong or intentionally modified. 1323 * Always ensure result fits within application's authorized limits. 1324 * Each application can set its own limits. 1325 * note 5 : ZSTD_findDecompressedSize handles multiple frames, and so it must traverse the input to 1326 * read each contained frame header. This is fast as most of the data is skipped, 1327 * however it does mean that all frame data must be present and valid. */ 1328 ZSTDLIB_STATIC_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize); 1329 1330 /*! ZSTD_decompressBound() : 1331 * `src` should point to the start of a series of ZSTD encoded and/or skippable frames 1332 * `srcSize` must be the _exact_ size of this series 1333 * (i.e. there should be a frame boundary at `src + srcSize`) 1334 * @return : - upper-bound for the decompressed size of all data in all successive frames 1335 * - if an error occurred: ZSTD_CONTENTSIZE_ERROR 1336 * 1337 * note 1 : an error can occur if `src` contains an invalid or incorrectly formatted frame. 1338 * note 2 : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`. 1339 * in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value. 1340 * note 3 : when the decompressed size field isn't available, the upper-bound for that frame is calculated by: 1341 * upper-bound = # blocks * min(128 KB, Window_Size) 1342 */ 1343 ZSTDLIB_STATIC_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize); 1344 1345 /*! ZSTD_frameHeaderSize() : 1346 * srcSize must be >= ZSTD_FRAMEHEADERSIZE_PREFIX. 1347 * @return : size of the Frame Header, 1348 * or an error code (if srcSize is too small) */ 1349 ZSTDLIB_STATIC_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize); 1350 1351 typedef enum { 1352 ZSTD_sf_noBlockDelimiters = 0, /* Representation of ZSTD_Sequence has no block delimiters, sequences only */ 1353 ZSTD_sf_explicitBlockDelimiters = 1 /* Representation of ZSTD_Sequence contains explicit block delimiters */ 1354 } ZSTD_sequenceFormat_e; 1355 1356 /*! ZSTD_generateSequences() : 1357 * Generate sequences using ZSTD_compress2, given a source buffer. 1358 * 1359 * Each block will end with a dummy sequence 1360 * with offset == 0, matchLength == 0, and litLength == length of last literals. 1361 * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0) 1362 * simply acts as a block delimiter. 1363 * 1364 * zc can be used to insert custom compression params. 1365 * This function invokes ZSTD_compress2 1366 * 1367 * The output of this function can be fed into ZSTD_compressSequences() with CCtx 1368 * setting of ZSTD_c_blockDelimiters as ZSTD_sf_explicitBlockDelimiters 1369 * @return : number of sequences generated 1370 */ 1371 1372 ZSTDLIB_STATIC_API size_t ZSTD_generateSequences(ZSTD_CCtx* zc, ZSTD_Sequence* outSeqs, 1373 size_t outSeqsSize, const void* src, size_t srcSize); 1374 1375 /*! ZSTD_mergeBlockDelimiters() : 1376 * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals 1377 * by merging them into the literals of the next sequence. 1378 * 1379 * As such, the final generated result has no explicit representation of block boundaries, 1380 * and the final last literals segment is not represented in the sequences. 1381 * 1382 * The output of this function can be fed into ZSTD_compressSequences() with CCtx 1383 * setting of ZSTD_c_blockDelimiters as ZSTD_sf_noBlockDelimiters 1384 * @return : number of sequences left after merging 1385 */ 1386 ZSTDLIB_STATIC_API size_t ZSTD_mergeBlockDelimiters(ZSTD_Sequence* sequences, size_t seqsSize); 1387 1388 /*! ZSTD_compressSequences() : 1389 * Compress an array of ZSTD_Sequence, generated from the original source buffer, into dst. 1390 * If a dictionary is included, then the cctx should reference the dict. (see: ZSTD_CCtx_refCDict(), ZSTD_CCtx_loadDictionary(), etc.) 1391 * The entire source is compressed into a single frame. 1392 * 1393 * The compression behavior changes based on cctx params. In particular: 1394 * If ZSTD_c_blockDelimiters == ZSTD_sf_noBlockDelimiters, the array of ZSTD_Sequence is expected to contain 1395 * no block delimiters (defined in ZSTD_Sequence). Block boundaries are roughly determined based on 1396 * the block size derived from the cctx, and sequences may be split. This is the default setting. 1397 * 1398 * If ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, the array of ZSTD_Sequence is expected to contain 1399 * block delimiters (defined in ZSTD_Sequence). Behavior is undefined if no block delimiters are provided. 1400 * 1401 * If ZSTD_c_validateSequences == 0, this function will blindly accept the sequences provided. Invalid sequences cause undefined 1402 * behavior. If ZSTD_c_validateSequences == 1, then if sequence is invalid (see doc/zstd_compression_format.md for 1403 * specifics regarding offset/matchlength requirements) then the function will bail out and return an error. 1404 * 1405 * In addition to the two adjustable experimental params, there are other important cctx params. 1406 * - ZSTD_c_minMatch MUST be set as less than or equal to the smallest match generated by the match finder. It has a minimum value of ZSTD_MINMATCH_MIN. 1407 * - ZSTD_c_compressionLevel accordingly adjusts the strength of the entropy coder, as it would in typical compression. 1408 * - ZSTD_c_windowLog affects offset validation: this function will return an error at higher debug levels if a provided offset 1409 * is larger than what the spec allows for a given window log and dictionary (if present). See: doc/zstd_compression_format.md 1410 * 1411 * Note: Repcodes are, as of now, always re-calculated within this function, so ZSTD_Sequence::rep is unused. 1412 * Note 2: Once we integrate ability to ingest repcodes, the explicit block delims mode must respect those repcodes exactly, 1413 * and cannot emit an RLE block that disagrees with the repcode history 1414 * @return : final compressed size or a ZSTD error. 1415 */ 1416 ZSTDLIB_STATIC_API size_t ZSTD_compressSequences(ZSTD_CCtx* const cctx, void* dst, size_t dstSize, 1417 const ZSTD_Sequence* inSeqs, size_t inSeqsSize, 1418 const void* src, size_t srcSize); 1419 1420 1421 /*! ZSTD_writeSkippableFrame() : 1422 * Generates a zstd skippable frame containing data given by src, and writes it to dst buffer. 1423 * 1424 * Skippable frames begin with a 4-byte magic number. There are 16 possible choices of magic number, 1425 * ranging from ZSTD_MAGIC_SKIPPABLE_START to ZSTD_MAGIC_SKIPPABLE_START+15. 1426 * As such, the parameter magicVariant controls the exact skippable frame magic number variant used, so 1427 * the magic number used will be ZSTD_MAGIC_SKIPPABLE_START + magicVariant. 1428 * 1429 * Returns an error if destination buffer is not large enough, if the source size is not representable 1430 * with a 4-byte unsigned int, or if the parameter magicVariant is greater than 15 (and therefore invalid). 1431 * 1432 * @return : number of bytes written or a ZSTD error. 1433 */ 1434 ZSTDLIB_STATIC_API size_t ZSTD_writeSkippableFrame(void* dst, size_t dstCapacity, 1435 const void* src, size_t srcSize, unsigned magicVariant); 1436 1437 /*! ZSTD_readSkippableFrame() : 1438 * Retrieves a zstd skippable frame containing data given by src, and writes it to dst buffer. 1439 * 1440 * The parameter magicVariant will receive the magicVariant that was supplied when the frame was written, 1441 * i.e. magicNumber - ZSTD_MAGIC_SKIPPABLE_START. This can be NULL if the caller is not interested 1442 * in the magicVariant. 1443 * 1444 * Returns an error if destination buffer is not large enough, or if the frame is not skippable. 1445 * 1446 * @return : number of bytes written or a ZSTD error. 1447 */ 1448 ZSTDLIB_API size_t ZSTD_readSkippableFrame(void* dst, size_t dstCapacity, unsigned* magicVariant, 1449 const void* src, size_t srcSize); 1450 1451 /*! ZSTD_isSkippableFrame() : 1452 * Tells if the content of `buffer` starts with a valid Frame Identifier for a skippable frame. 1453 */ 1454 ZSTDLIB_API unsigned ZSTD_isSkippableFrame(const void* buffer, size_t size); 1455 1456 1457 1458 /* ************************************* 1459 * Memory management 1460 ***************************************/ 1461 1462 /*! ZSTD_estimate*() : 1463 * These functions make it possible to estimate memory usage 1464 * of a future {D,C}Ctx, before its creation. 1465 * 1466 * ZSTD_estimateCCtxSize() will provide a memory budget large enough 1467 * for any compression level up to selected one. 1468 * Note : Unlike ZSTD_estimateCStreamSize*(), this estimate 1469 * does not include space for a window buffer. 1470 * Therefore, the estimation is only guaranteed for single-shot compressions, not streaming. 1471 * The estimate will assume the input may be arbitrarily large, 1472 * which is the worst case. 1473 * 1474 * When srcSize can be bound by a known and rather "small" value, 1475 * this fact can be used to provide a tighter estimation 1476 * because the CCtx compression context will need less memory. 1477 * This tighter estimation can be provided by more advanced functions 1478 * ZSTD_estimateCCtxSize_usingCParams(), which can be used in tandem with ZSTD_getCParams(), 1479 * and ZSTD_estimateCCtxSize_usingCCtxParams(), which can be used in tandem with ZSTD_CCtxParams_setParameter(). 1480 * Both can be used to estimate memory using custom compression parameters and arbitrary srcSize limits. 1481 * 1482 * Note 2 : only single-threaded compression is supported. 1483 * ZSTD_estimateCCtxSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1. 1484 */ 1485 ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize(int compressionLevel); 1486 ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams); 1487 ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params); 1488 ZSTDLIB_STATIC_API size_t ZSTD_estimateDCtxSize(void); 1489 1490 /*! ZSTD_estimateCStreamSize() : 1491 * ZSTD_estimateCStreamSize() will provide a budget large enough for any compression level up to selected one. 1492 * It will also consider src size to be arbitrarily "large", which is worst case. 1493 * If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation. 1494 * ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel. 1495 * ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1. 1496 * Note : CStream size estimation is only correct for single-threaded compression. 1497 * ZSTD_DStream memory budget depends on window Size. 1498 * This information can be passed manually, using ZSTD_estimateDStreamSize, 1499 * or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame(); 1500 * Note : if streaming is init with function ZSTD_init?Stream_usingDict(), 1501 * an internal ?Dict will be created, which additional size is not estimated here. 1502 * In this case, get total size by adding ZSTD_estimate?DictSize */ 1503 ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize(int compressionLevel); 1504 ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams); 1505 ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params); 1506 ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize(size_t windowSize); 1507 ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize); 1508 1509 /*! ZSTD_estimate?DictSize() : 1510 * ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict(). 1511 * ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced(). 1512 * Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller. 1513 */ 1514 ZSTDLIB_STATIC_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel); 1515 ZSTDLIB_STATIC_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod); 1516 ZSTDLIB_STATIC_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod); 1517 1518 /*! ZSTD_initStatic*() : 1519 * Initialize an object using a pre-allocated fixed-size buffer. 1520 * workspace: The memory area to emplace the object into. 1521 * Provided pointer *must be 8-bytes aligned*. 1522 * Buffer must outlive object. 1523 * workspaceSize: Use ZSTD_estimate*Size() to determine 1524 * how large workspace must be to support target scenario. 1525 * @return : pointer to object (same address as workspace, just different type), 1526 * or NULL if error (size too small, incorrect alignment, etc.) 1527 * Note : zstd will never resize nor malloc() when using a static buffer. 1528 * If the object requires more memory than available, 1529 * zstd will just error out (typically ZSTD_error_memory_allocation). 1530 * Note 2 : there is no corresponding "free" function. 1531 * Since workspace is allocated externally, it must be freed externally too. 1532 * Note 3 : cParams : use ZSTD_getCParams() to convert a compression level 1533 * into its associated cParams. 1534 * Limitation 1 : currently not compatible with internal dictionary creation, triggered by 1535 * ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict(). 1536 * Limitation 2 : static cctx currently not compatible with multi-threading. 1537 * Limitation 3 : static dctx is incompatible with legacy support. 1538 */ 1539 ZSTDLIB_STATIC_API ZSTD_CCtx* ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize); 1540 ZSTDLIB_STATIC_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize); /*< same as ZSTD_initStaticCCtx() */ 1541 1542 ZSTDLIB_STATIC_API ZSTD_DCtx* ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize); 1543 ZSTDLIB_STATIC_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize); /*< same as ZSTD_initStaticDCtx() */ 1544 1545 ZSTDLIB_STATIC_API const ZSTD_CDict* ZSTD_initStaticCDict( 1546 void* workspace, size_t workspaceSize, 1547 const void* dict, size_t dictSize, 1548 ZSTD_dictLoadMethod_e dictLoadMethod, 1549 ZSTD_dictContentType_e dictContentType, 1550 ZSTD_compressionParameters cParams); 1551 1552 ZSTDLIB_STATIC_API const ZSTD_DDict* ZSTD_initStaticDDict( 1553 void* workspace, size_t workspaceSize, 1554 const void* dict, size_t dictSize, 1555 ZSTD_dictLoadMethod_e dictLoadMethod, 1556 ZSTD_dictContentType_e dictContentType); 1557 1558 1559 /*! Custom memory allocation : 1560 * These prototypes make it possible to pass your own allocation/free functions. 1561 * ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below. 1562 * All allocation/free operations will be completed using these custom variants instead of regular <stdlib.h> ones. 1563 */ 1564 typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size); 1565 typedef void (*ZSTD_freeFunction) (void* opaque, void* address); 1566 typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem; 1567 static 1568 __attribute__((__unused__)) 1569 ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL }; /*< this constant defers to stdlib's functions */ 1570 1571 ZSTDLIB_STATIC_API ZSTD_CCtx* ZSTD_createCCtx_advanced(ZSTD_customMem customMem); 1572 ZSTDLIB_STATIC_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem); 1573 ZSTDLIB_STATIC_API ZSTD_DCtx* ZSTD_createDCtx_advanced(ZSTD_customMem customMem); 1574 ZSTDLIB_STATIC_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem); 1575 1576 ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize, 1577 ZSTD_dictLoadMethod_e dictLoadMethod, 1578 ZSTD_dictContentType_e dictContentType, 1579 ZSTD_compressionParameters cParams, 1580 ZSTD_customMem customMem); 1581 1582 /*! Thread pool : 1583 * These prototypes make it possible to share a thread pool among multiple compression contexts. 1584 * This can limit resources for applications with multiple threads where each one uses 1585 * a threaded compression mode (via ZSTD_c_nbWorkers parameter). 1586 * ZSTD_createThreadPool creates a new thread pool with a given number of threads. 1587 * Note that the lifetime of such pool must exist while being used. 1588 * ZSTD_CCtx_refThreadPool assigns a thread pool to a context (use NULL argument value 1589 * to use an internal thread pool). 1590 * ZSTD_freeThreadPool frees a thread pool, accepts NULL pointer. 1591 */ 1592 typedef struct POOL_ctx_s ZSTD_threadPool; 1593 ZSTDLIB_STATIC_API ZSTD_threadPool* ZSTD_createThreadPool(size_t numThreads); 1594 ZSTDLIB_STATIC_API void ZSTD_freeThreadPool (ZSTD_threadPool* pool); /* accept NULL pointer */ 1595 ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refThreadPool(ZSTD_CCtx* cctx, ZSTD_threadPool* pool); 1596 1597 1598 /* 1599 * This API is temporary and is expected to change or disappear in the future! 1600 */ 1601 ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_advanced2( 1602 const void* dict, size_t dictSize, 1603 ZSTD_dictLoadMethod_e dictLoadMethod, 1604 ZSTD_dictContentType_e dictContentType, 1605 const ZSTD_CCtx_params* cctxParams, 1606 ZSTD_customMem customMem); 1607 1608 ZSTDLIB_STATIC_API ZSTD_DDict* ZSTD_createDDict_advanced( 1609 const void* dict, size_t dictSize, 1610 ZSTD_dictLoadMethod_e dictLoadMethod, 1611 ZSTD_dictContentType_e dictContentType, 1612 ZSTD_customMem customMem); 1613 1614 1615 /* ************************************* 1616 * Advanced compression functions 1617 ***************************************/ 1618 1619 /*! ZSTD_createCDict_byReference() : 1620 * Create a digested dictionary for compression 1621 * Dictionary content is just referenced, not duplicated. 1622 * As a consequence, `dictBuffer` **must** outlive CDict, 1623 * and its content must remain unmodified throughout the lifetime of CDict. 1624 * note: equivalent to ZSTD_createCDict_advanced(), with dictLoadMethod==ZSTD_dlm_byRef */ 1625 ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel); 1626 1627 /*! ZSTD_getCParams() : 1628 * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize. 1629 * `estimatedSrcSize` value is optional, select 0 if not known */ 1630 ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); 1631 1632 /*! ZSTD_getParams() : 1633 * same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`. 1634 * All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */ 1635 ZSTDLIB_STATIC_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); 1636 1637 /*! ZSTD_checkCParams() : 1638 * Ensure param values remain within authorized range. 1639 * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */ 1640 ZSTDLIB_STATIC_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params); 1641 1642 /*! ZSTD_adjustCParams() : 1643 * optimize params for a given `srcSize` and `dictSize`. 1644 * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN. 1645 * `dictSize` must be `0` when there is no dictionary. 1646 * cPar can be invalid : all parameters will be clamped within valid range in the @return struct. 1647 * This function never fails (wide contract) */ 1648 ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize); 1649 1650 /*! ZSTD_compress_advanced() : 1651 * Note : this function is now DEPRECATED. 1652 * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters. 1653 * This prototype will generate compilation warnings. */ 1654 ZSTD_DEPRECATED("use ZSTD_compress2") 1655 size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx, 1656 void* dst, size_t dstCapacity, 1657 const void* src, size_t srcSize, 1658 const void* dict,size_t dictSize, 1659 ZSTD_parameters params); 1660 1661 /*! ZSTD_compress_usingCDict_advanced() : 1662 * Note : this function is now DEPRECATED. 1663 * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_loadDictionary() and other parameter setters. 1664 * This prototype will generate compilation warnings. */ 1665 ZSTD_DEPRECATED("use ZSTD_compress2 with ZSTD_CCtx_loadDictionary") 1666 size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx, 1667 void* dst, size_t dstCapacity, 1668 const void* src, size_t srcSize, 1669 const ZSTD_CDict* cdict, 1670 ZSTD_frameParameters fParams); 1671 1672 1673 /*! ZSTD_CCtx_loadDictionary_byReference() : 1674 * Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx. 1675 * It saves some memory, but also requires that `dict` outlives its usage within `cctx` */ 1676 ZSTDLIB_STATIC_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); 1677 1678 /*! ZSTD_CCtx_loadDictionary_advanced() : 1679 * Same as ZSTD_CCtx_loadDictionary(), but gives finer control over 1680 * how to load the dictionary (by copy ? by reference ?) 1681 * and how to interpret it (automatic ? force raw mode ? full mode only ?) */ 1682 ZSTDLIB_STATIC_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); 1683 1684 /*! ZSTD_CCtx_refPrefix_advanced() : 1685 * Same as ZSTD_CCtx_refPrefix(), but gives finer control over 1686 * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ 1687 ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); 1688 1689 /* === experimental parameters === */ 1690 /* these parameters can be used with ZSTD_setParameter() 1691 * they are not guaranteed to remain supported in the future */ 1692 1693 /* Enables rsyncable mode, 1694 * which makes compressed files more rsync friendly 1695 * by adding periodic synchronization points to the compressed data. 1696 * The target average block size is ZSTD_c_jobSize / 2. 1697 * It's possible to modify the job size to increase or decrease 1698 * the granularity of the synchronization point. 1699 * Once the jobSize is smaller than the window size, 1700 * it will result in compression ratio degradation. 1701 * NOTE 1: rsyncable mode only works when multithreading is enabled. 1702 * NOTE 2: rsyncable performs poorly in combination with long range mode, 1703 * since it will decrease the effectiveness of synchronization points, 1704 * though mileage may vary. 1705 * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s. 1706 * If the selected compression level is already running significantly slower, 1707 * the overall speed won't be significantly impacted. 1708 */ 1709 #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1 1710 1711 /* Select a compression format. 1712 * The value must be of type ZSTD_format_e. 1713 * See ZSTD_format_e enum definition for details */ 1714 #define ZSTD_c_format ZSTD_c_experimentalParam2 1715 1716 /* Force back-reference distances to remain < windowSize, 1717 * even when referencing into Dictionary content (default:0) */ 1718 #define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3 1719 1720 /* Controls whether the contents of a CDict 1721 * are used in place, or copied into the working context. 1722 * Accepts values from the ZSTD_dictAttachPref_e enum. 1723 * See the comments on that enum for an explanation of the feature. */ 1724 #define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4 1725 1726 /* Controlled with ZSTD_paramSwitch_e enum. 1727 * Default is ZSTD_ps_auto. 1728 * Set to ZSTD_ps_disable to never compress literals. 1729 * Set to ZSTD_ps_enable to always compress literals. (Note: uncompressed literals 1730 * may still be emitted if huffman is not beneficial to use.) 1731 * 1732 * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use 1733 * literals compression based on the compression parameters - specifically, 1734 * negative compression levels do not use literal compression. 1735 */ 1736 #define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5 1737 1738 /* Tries to fit compressed block size to be around targetCBlockSize. 1739 * No target when targetCBlockSize == 0. 1740 * There is no guarantee on compressed block size (default:0) */ 1741 #define ZSTD_c_targetCBlockSize ZSTD_c_experimentalParam6 1742 1743 /* User's best guess of source size. 1744 * Hint is not valid when srcSizeHint == 0. 1745 * There is no guarantee that hint is close to actual source size, 1746 * but compression ratio may regress significantly if guess considerably underestimates */ 1747 #define ZSTD_c_srcSizeHint ZSTD_c_experimentalParam7 1748 1749 /* Controls whether the new and experimental "dedicated dictionary search 1750 * structure" can be used. This feature is still rough around the edges, be 1751 * prepared for surprising behavior! 1752 * 1753 * How to use it: 1754 * 1755 * When using a CDict, whether to use this feature or not is controlled at 1756 * CDict creation, and it must be set in a CCtxParams set passed into that 1757 * construction (via ZSTD_createCDict_advanced2()). A compression will then 1758 * use the feature or not based on how the CDict was constructed; the value of 1759 * this param, set in the CCtx, will have no effect. 1760 * 1761 * However, when a dictionary buffer is passed into a CCtx, such as via 1762 * ZSTD_CCtx_loadDictionary(), this param can be set on the CCtx to control 1763 * whether the CDict that is created internally can use the feature or not. 1764 * 1765 * What it does: 1766 * 1767 * Normally, the internal data structures of the CDict are analogous to what 1768 * would be stored in a CCtx after compressing the contents of a dictionary. 1769 * To an approximation, a compression using a dictionary can then use those 1770 * data structures to simply continue what is effectively a streaming 1771 * compression where the simulated compression of the dictionary left off. 1772 * Which is to say, the search structures in the CDict are normally the same 1773 * format as in the CCtx. 1774 * 1775 * It is possible to do better, since the CDict is not like a CCtx: the search 1776 * structures are written once during CDict creation, and then are only read 1777 * after that, while the search structures in the CCtx are both read and 1778 * written as the compression goes along. This means we can choose a search 1779 * structure for the dictionary that is read-optimized. 1780 * 1781 * This feature enables the use of that different structure. 1782 * 1783 * Note that some of the members of the ZSTD_compressionParameters struct have 1784 * different semantics and constraints in the dedicated search structure. It is 1785 * highly recommended that you simply set a compression level in the CCtxParams 1786 * you pass into the CDict creation call, and avoid messing with the cParams 1787 * directly. 1788 * 1789 * Effects: 1790 * 1791 * This will only have any effect when the selected ZSTD_strategy 1792 * implementation supports this feature. Currently, that's limited to 1793 * ZSTD_greedy, ZSTD_lazy, and ZSTD_lazy2. 1794 * 1795 * Note that this means that the CDict tables can no longer be copied into the 1796 * CCtx, so the dict attachment mode ZSTD_dictForceCopy will no longer be 1797 * usable. The dictionary can only be attached or reloaded. 1798 * 1799 * In general, you should expect compression to be faster--sometimes very much 1800 * so--and CDict creation to be slightly slower. Eventually, we will probably 1801 * make this mode the default. 1802 */ 1803 #define ZSTD_c_enableDedicatedDictSearch ZSTD_c_experimentalParam8 1804 1805 /* ZSTD_c_stableInBuffer 1806 * Experimental parameter. 1807 * Default is 0 == disabled. Set to 1 to enable. 1808 * 1809 * Tells the compressor that the ZSTD_inBuffer will ALWAYS be the same 1810 * between calls, except for the modifications that zstd makes to pos (the 1811 * caller must not modify pos). This is checked by the compressor, and 1812 * compression will fail if it ever changes. This means the only flush 1813 * mode that makes sense is ZSTD_e_end, so zstd will error if ZSTD_e_end 1814 * is not used. The data in the ZSTD_inBuffer in the range [src, src + pos) 1815 * MUST not be modified during compression or you will get data corruption. 1816 * 1817 * When this flag is enabled zstd won't allocate an input window buffer, 1818 * because the user guarantees it can reference the ZSTD_inBuffer until 1819 * the frame is complete. But, it will still allocate an output buffer 1820 * large enough to fit a block (see ZSTD_c_stableOutBuffer). This will also 1821 * avoid the memcpy() from the input buffer to the input window buffer. 1822 * 1823 * NOTE: ZSTD_compressStream2() will error if ZSTD_e_end is not used. 1824 * That means this flag cannot be used with ZSTD_compressStream(). 1825 * 1826 * NOTE: So long as the ZSTD_inBuffer always points to valid memory, using 1827 * this flag is ALWAYS memory safe, and will never access out-of-bounds 1828 * memory. However, compression WILL fail if you violate the preconditions. 1829 * 1830 * WARNING: The data in the ZSTD_inBuffer in the range [dst, dst + pos) MUST 1831 * not be modified during compression or you will get data corruption. This 1832 * is because zstd needs to reference data in the ZSTD_inBuffer to find 1833 * matches. Normally zstd maintains its own window buffer for this purpose, 1834 * but passing this flag tells zstd to use the user provided buffer. 1835 */ 1836 #define ZSTD_c_stableInBuffer ZSTD_c_experimentalParam9 1837 1838 /* ZSTD_c_stableOutBuffer 1839 * Experimental parameter. 1840 * Default is 0 == disabled. Set to 1 to enable. 1841 * 1842 * Tells he compressor that the ZSTD_outBuffer will not be resized between 1843 * calls. Specifically: (out.size - out.pos) will never grow. This gives the 1844 * compressor the freedom to say: If the compressed data doesn't fit in the 1845 * output buffer then return ZSTD_error_dstSizeTooSmall. This allows us to 1846 * always decompress directly into the output buffer, instead of decompressing 1847 * into an internal buffer and copying to the output buffer. 1848 * 1849 * When this flag is enabled zstd won't allocate an output buffer, because 1850 * it can write directly to the ZSTD_outBuffer. It will still allocate the 1851 * input window buffer (see ZSTD_c_stableInBuffer). 1852 * 1853 * Zstd will check that (out.size - out.pos) never grows and return an error 1854 * if it does. While not strictly necessary, this should prevent surprises. 1855 */ 1856 #define ZSTD_c_stableOutBuffer ZSTD_c_experimentalParam10 1857 1858 /* ZSTD_c_blockDelimiters 1859 * Default is 0 == ZSTD_sf_noBlockDelimiters. 1860 * 1861 * For use with sequence compression API: ZSTD_compressSequences(). 1862 * 1863 * Designates whether or not the given array of ZSTD_Sequence contains block delimiters 1864 * and last literals, which are defined as sequences with offset == 0 and matchLength == 0. 1865 * See the definition of ZSTD_Sequence for more specifics. 1866 */ 1867 #define ZSTD_c_blockDelimiters ZSTD_c_experimentalParam11 1868 1869 /* ZSTD_c_validateSequences 1870 * Default is 0 == disabled. Set to 1 to enable sequence validation. 1871 * 1872 * For use with sequence compression API: ZSTD_compressSequences(). 1873 * Designates whether or not we validate sequences provided to ZSTD_compressSequences() 1874 * during function execution. 1875 * 1876 * Without validation, providing a sequence that does not conform to the zstd spec will cause 1877 * undefined behavior, and may produce a corrupted block. 1878 * 1879 * With validation enabled, a if sequence is invalid (see doc/zstd_compression_format.md for 1880 * specifics regarding offset/matchlength requirements) then the function will bail out and 1881 * return an error. 1882 * 1883 */ 1884 #define ZSTD_c_validateSequences ZSTD_c_experimentalParam12 1885 1886 /* ZSTD_c_useBlockSplitter 1887 * Controlled with ZSTD_paramSwitch_e enum. 1888 * Default is ZSTD_ps_auto. 1889 * Set to ZSTD_ps_disable to never use block splitter. 1890 * Set to ZSTD_ps_enable to always use block splitter. 1891 * 1892 * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use 1893 * block splitting based on the compression parameters. 1894 */ 1895 #define ZSTD_c_useBlockSplitter ZSTD_c_experimentalParam13 1896 1897 /* ZSTD_c_useRowMatchFinder 1898 * Controlled with ZSTD_paramSwitch_e enum. 1899 * Default is ZSTD_ps_auto. 1900 * Set to ZSTD_ps_disable to never use row-based matchfinder. 1901 * Set to ZSTD_ps_enable to force usage of row-based matchfinder. 1902 * 1903 * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use 1904 * the row-based matchfinder based on support for SIMD instructions and the window log. 1905 * Note that this only pertains to compression strategies: greedy, lazy, and lazy2 1906 */ 1907 #define ZSTD_c_useRowMatchFinder ZSTD_c_experimentalParam14 1908 1909 /* ZSTD_c_deterministicRefPrefix 1910 * Default is 0 == disabled. Set to 1 to enable. 1911 * 1912 * Zstd produces different results for prefix compression when the prefix is 1913 * directly adjacent to the data about to be compressed vs. when it isn't. 1914 * This is because zstd detects that the two buffers are contiguous and it can 1915 * use a more efficient match finding algorithm. However, this produces different 1916 * results than when the two buffers are non-contiguous. This flag forces zstd 1917 * to always load the prefix in non-contiguous mode, even if it happens to be 1918 * adjacent to the data, to guarantee determinism. 1919 * 1920 * If you really care about determinism when using a dictionary or prefix, 1921 * like when doing delta compression, you should select this option. It comes 1922 * at a speed penalty of about ~2.5% if the dictionary and data happened to be 1923 * contiguous, and is free if they weren't contiguous. We don't expect that 1924 * intentionally making the dictionary and data contiguous will be worth the 1925 * cost to memcpy() the data. 1926 */ 1927 #define ZSTD_c_deterministicRefPrefix ZSTD_c_experimentalParam15 1928 1929 /*! ZSTD_CCtx_getParameter() : 1930 * Get the requested compression parameter value, selected by enum ZSTD_cParameter, 1931 * and store it into int* value. 1932 * @return : 0, or an error code (which can be tested with ZSTD_isError()). 1933 */ 1934 ZSTDLIB_STATIC_API size_t ZSTD_CCtx_getParameter(const ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value); 1935 1936 1937 /*! ZSTD_CCtx_params : 1938 * Quick howto : 1939 * - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure 1940 * - ZSTD_CCtxParams_setParameter() : Push parameters one by one into 1941 * an existing ZSTD_CCtx_params structure. 1942 * This is similar to 1943 * ZSTD_CCtx_setParameter(). 1944 * - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to 1945 * an existing CCtx. 1946 * These parameters will be applied to 1947 * all subsequent frames. 1948 * - ZSTD_compressStream2() : Do compression using the CCtx. 1949 * - ZSTD_freeCCtxParams() : Free the memory, accept NULL pointer. 1950 * 1951 * This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams() 1952 * for static allocation of CCtx for single-threaded compression. 1953 */ 1954 ZSTDLIB_STATIC_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void); 1955 ZSTDLIB_STATIC_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params); /* accept NULL pointer */ 1956 1957 /*! ZSTD_CCtxParams_reset() : 1958 * Reset params to default values. 1959 */ 1960 ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params); 1961 1962 /*! ZSTD_CCtxParams_init() : 1963 * Initializes the compression parameters of cctxParams according to 1964 * compression level. All other parameters are reset to their default values. 1965 */ 1966 ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel); 1967 1968 /*! ZSTD_CCtxParams_init_advanced() : 1969 * Initializes the compression and frame parameters of cctxParams according to 1970 * params. All other parameters are reset to their default values. 1971 */ 1972 ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params); 1973 1974 /*! ZSTD_CCtxParams_setParameter() : Requires v1.4.0+ 1975 * Similar to ZSTD_CCtx_setParameter. 1976 * Set one compression parameter, selected by enum ZSTD_cParameter. 1977 * Parameters must be applied to a ZSTD_CCtx using 1978 * ZSTD_CCtx_setParametersUsingCCtxParams(). 1979 * @result : a code representing success or failure (which can be tested with 1980 * ZSTD_isError()). 1981 */ 1982 ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value); 1983 1984 /*! ZSTD_CCtxParams_getParameter() : 1985 * Similar to ZSTD_CCtx_getParameter. 1986 * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter. 1987 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 1988 */ 1989 ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_getParameter(const ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value); 1990 1991 /*! ZSTD_CCtx_setParametersUsingCCtxParams() : 1992 * Apply a set of ZSTD_CCtx_params to the compression context. 1993 * This can be done even after compression is started, 1994 * if nbWorkers==0, this will have no impact until a new compression is started. 1995 * if nbWorkers>=1, new parameters will be picked up at next job, 1996 * with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated). 1997 */ 1998 ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setParametersUsingCCtxParams( 1999 ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params); 2000 2001 /*! ZSTD_compressStream2_simpleArgs() : 2002 * Same as ZSTD_compressStream2(), 2003 * but using only integral types as arguments. 2004 * This variant might be helpful for binders from dynamic languages 2005 * which have troubles handling structures containing memory pointers. 2006 */ 2007 ZSTDLIB_STATIC_API size_t ZSTD_compressStream2_simpleArgs ( 2008 ZSTD_CCtx* cctx, 2009 void* dst, size_t dstCapacity, size_t* dstPos, 2010 const void* src, size_t srcSize, size_t* srcPos, 2011 ZSTD_EndDirective endOp); 2012 2013 2014 /* ************************************* 2015 * Advanced decompression functions 2016 ***************************************/ 2017 2018 /*! ZSTD_isFrame() : 2019 * Tells if the content of `buffer` starts with a valid Frame Identifier. 2020 * Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0. 2021 * Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled. 2022 * Note 3 : Skippable Frame Identifiers are considered valid. */ 2023 ZSTDLIB_STATIC_API unsigned ZSTD_isFrame(const void* buffer, size_t size); 2024 2025 /*! ZSTD_createDDict_byReference() : 2026 * Create a digested dictionary, ready to start decompression operation without startup delay. 2027 * Dictionary content is referenced, and therefore stays in dictBuffer. 2028 * It is important that dictBuffer outlives DDict, 2029 * it must remain read accessible throughout the lifetime of DDict */ 2030 ZSTDLIB_STATIC_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize); 2031 2032 /*! ZSTD_DCtx_loadDictionary_byReference() : 2033 * Same as ZSTD_DCtx_loadDictionary(), 2034 * but references `dict` content instead of copying it into `dctx`. 2035 * This saves memory if `dict` remains around., 2036 * However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */ 2037 ZSTDLIB_STATIC_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); 2038 2039 /*! ZSTD_DCtx_loadDictionary_advanced() : 2040 * Same as ZSTD_DCtx_loadDictionary(), 2041 * but gives direct control over 2042 * how to load the dictionary (by copy ? by reference ?) 2043 * and how to interpret it (automatic ? force raw mode ? full mode only ?). */ 2044 ZSTDLIB_STATIC_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); 2045 2046 /*! ZSTD_DCtx_refPrefix_advanced() : 2047 * Same as ZSTD_DCtx_refPrefix(), but gives finer control over 2048 * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ 2049 ZSTDLIB_STATIC_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); 2050 2051 /*! ZSTD_DCtx_setMaxWindowSize() : 2052 * Refuses allocating internal buffers for frames requiring a window size larger than provided limit. 2053 * This protects a decoder context from reserving too much memory for itself (potential attack scenario). 2054 * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. 2055 * By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT) 2056 * @return : 0, or an error code (which can be tested using ZSTD_isError()). 2057 */ 2058 ZSTDLIB_STATIC_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize); 2059 2060 /*! ZSTD_DCtx_getParameter() : 2061 * Get the requested decompression parameter value, selected by enum ZSTD_dParameter, 2062 * and store it into int* value. 2063 * @return : 0, or an error code (which can be tested with ZSTD_isError()). 2064 */ 2065 ZSTDLIB_STATIC_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int* value); 2066 2067 /* ZSTD_d_format 2068 * experimental parameter, 2069 * allowing selection between ZSTD_format_e input compression formats 2070 */ 2071 #define ZSTD_d_format ZSTD_d_experimentalParam1 2072 /* ZSTD_d_stableOutBuffer 2073 * Experimental parameter. 2074 * Default is 0 == disabled. Set to 1 to enable. 2075 * 2076 * Tells the decompressor that the ZSTD_outBuffer will ALWAYS be the same 2077 * between calls, except for the modifications that zstd makes to pos (the 2078 * caller must not modify pos). This is checked by the decompressor, and 2079 * decompression will fail if it ever changes. Therefore the ZSTD_outBuffer 2080 * MUST be large enough to fit the entire decompressed frame. This will be 2081 * checked when the frame content size is known. The data in the ZSTD_outBuffer 2082 * in the range [dst, dst + pos) MUST not be modified during decompression 2083 * or you will get data corruption. 2084 * 2085 * When this flags is enabled zstd won't allocate an output buffer, because 2086 * it can write directly to the ZSTD_outBuffer, but it will still allocate 2087 * an input buffer large enough to fit any compressed block. This will also 2088 * avoid the memcpy() from the internal output buffer to the ZSTD_outBuffer. 2089 * If you need to avoid the input buffer allocation use the buffer-less 2090 * streaming API. 2091 * 2092 * NOTE: So long as the ZSTD_outBuffer always points to valid memory, using 2093 * this flag is ALWAYS memory safe, and will never access out-of-bounds 2094 * memory. However, decompression WILL fail if you violate the preconditions. 2095 * 2096 * WARNING: The data in the ZSTD_outBuffer in the range [dst, dst + pos) MUST 2097 * not be modified during decompression or you will get data corruption. This 2098 * is because zstd needs to reference data in the ZSTD_outBuffer to regenerate 2099 * matches. Normally zstd maintains its own buffer for this purpose, but passing 2100 * this flag tells zstd to use the user provided buffer. 2101 */ 2102 #define ZSTD_d_stableOutBuffer ZSTD_d_experimentalParam2 2103 2104 /* ZSTD_d_forceIgnoreChecksum 2105 * Experimental parameter. 2106 * Default is 0 == disabled. Set to 1 to enable 2107 * 2108 * Tells the decompressor to skip checksum validation during decompression, regardless 2109 * of whether checksumming was specified during compression. This offers some 2110 * slight performance benefits, and may be useful for debugging. 2111 * Param has values of type ZSTD_forceIgnoreChecksum_e 2112 */ 2113 #define ZSTD_d_forceIgnoreChecksum ZSTD_d_experimentalParam3 2114 2115 /* ZSTD_d_refMultipleDDicts 2116 * Experimental parameter. 2117 * Default is 0 == disabled. Set to 1 to enable 2118 * 2119 * If enabled and dctx is allocated on the heap, then additional memory will be allocated 2120 * to store references to multiple ZSTD_DDict. That is, multiple calls of ZSTD_refDDict() 2121 * using a given ZSTD_DCtx, rather than overwriting the previous DDict reference, will instead 2122 * store all references. At decompression time, the appropriate dictID is selected 2123 * from the set of DDicts based on the dictID in the frame. 2124 * 2125 * Usage is simply calling ZSTD_refDDict() on multiple dict buffers. 2126 * 2127 * Param has values of byte ZSTD_refMultipleDDicts_e 2128 * 2129 * WARNING: Enabling this parameter and calling ZSTD_DCtx_refDDict(), will trigger memory 2130 * allocation for the hash table. ZSTD_freeDCtx() also frees this memory. 2131 * Memory is allocated as per ZSTD_DCtx::customMem. 2132 * 2133 * Although this function allocates memory for the table, the user is still responsible for 2134 * memory management of the underlying ZSTD_DDict* themselves. 2135 */ 2136 #define ZSTD_d_refMultipleDDicts ZSTD_d_experimentalParam4 2137 2138 2139 /*! ZSTD_DCtx_setFormat() : 2140 * This function is REDUNDANT. Prefer ZSTD_DCtx_setParameter(). 2141 * Instruct the decoder context about what kind of data to decode next. 2142 * This instruction is mandatory to decode data without a fully-formed header, 2143 * such ZSTD_f_zstd1_magicless for example. 2144 * @return : 0, or an error code (which can be tested using ZSTD_isError()). */ 2145 ZSTD_DEPRECATED("use ZSTD_DCtx_setParameter() instead") 2146 size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format); 2147 2148 /*! ZSTD_decompressStream_simpleArgs() : 2149 * Same as ZSTD_decompressStream(), 2150 * but using only integral types as arguments. 2151 * This can be helpful for binders from dynamic languages 2152 * which have troubles handling structures containing memory pointers. 2153 */ 2154 ZSTDLIB_STATIC_API size_t ZSTD_decompressStream_simpleArgs ( 2155 ZSTD_DCtx* dctx, 2156 void* dst, size_t dstCapacity, size_t* dstPos, 2157 const void* src, size_t srcSize, size_t* srcPos); 2158 2159 2160 /* ****************************************************************** 2161 * Advanced streaming functions 2162 * Warning : most of these functions are now redundant with the Advanced API. 2163 * Once Advanced API reaches "stable" status, 2164 * redundant functions will be deprecated, and then at some point removed. 2165 ********************************************************************/ 2166 2167 /*===== Advanced Streaming compression functions =====*/ 2168 2169 /*! ZSTD_initCStream_srcSize() : 2170 * This function is DEPRECATED, and equivalent to: 2171 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2172 * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) 2173 * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); 2174 * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); 2175 * 2176 * pledgedSrcSize must be correct. If it is not known at init time, use 2177 * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, 2178 * "0" also disables frame content size field. It may be enabled in the future. 2179 * This prototype will generate compilation warnings. 2180 */ 2181 ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") 2182 size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, 2183 int compressionLevel, 2184 unsigned long long pledgedSrcSize); 2185 2186 /*! ZSTD_initCStream_usingDict() : 2187 * This function is DEPRECATED, and is equivalent to: 2188 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2189 * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); 2190 * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); 2191 * 2192 * Creates of an internal CDict (incompatible with static CCtx), except if 2193 * dict == NULL or dictSize < 8, in which case no dict is used. 2194 * Note: dict is loaded with ZSTD_dct_auto (treated as a full zstd dictionary if 2195 * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy. 2196 * This prototype will generate compilation warnings. 2197 */ 2198 ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") 2199 size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, 2200 const void* dict, size_t dictSize, 2201 int compressionLevel); 2202 2203 /*! ZSTD_initCStream_advanced() : 2204 * This function is DEPRECATED, and is approximately equivalent to: 2205 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2206 * // Pseudocode: Set each zstd parameter and leave the rest as-is. 2207 * for ((param, value) : params) { 2208 * ZSTD_CCtx_setParameter(zcs, param, value); 2209 * } 2210 * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); 2211 * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); 2212 * 2213 * dict is loaded with ZSTD_dct_auto and ZSTD_dlm_byCopy. 2214 * pledgedSrcSize must be correct. 2215 * If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. 2216 * This prototype will generate compilation warnings. 2217 */ 2218 ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") 2219 size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs, 2220 const void* dict, size_t dictSize, 2221 ZSTD_parameters params, 2222 unsigned long long pledgedSrcSize); 2223 2224 /*! ZSTD_initCStream_usingCDict() : 2225 * This function is DEPRECATED, and equivalent to: 2226 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2227 * ZSTD_CCtx_refCDict(zcs, cdict); 2228 * 2229 * note : cdict will just be referenced, and must outlive compression session 2230 * This prototype will generate compilation warnings. 2231 */ 2232 ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions") 2233 size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict); 2234 2235 /*! ZSTD_initCStream_usingCDict_advanced() : 2236 * This function is DEPRECATED, and is approximately equivalent to: 2237 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2238 * // Pseudocode: Set each zstd frame parameter and leave the rest as-is. 2239 * for ((fParam, value) : fParams) { 2240 * ZSTD_CCtx_setParameter(zcs, fParam, value); 2241 * } 2242 * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); 2243 * ZSTD_CCtx_refCDict(zcs, cdict); 2244 * 2245 * same as ZSTD_initCStream_usingCDict(), with control over frame parameters. 2246 * pledgedSrcSize must be correct. If srcSize is not known at init time, use 2247 * value ZSTD_CONTENTSIZE_UNKNOWN. 2248 * This prototype will generate compilation warnings. 2249 */ 2250 ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions") 2251 size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, 2252 const ZSTD_CDict* cdict, 2253 ZSTD_frameParameters fParams, 2254 unsigned long long pledgedSrcSize); 2255 2256 /*! ZSTD_resetCStream() : 2257 * This function is DEPRECATED, and is equivalent to: 2258 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2259 * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); 2260 * Note: ZSTD_resetCStream() interprets pledgedSrcSize == 0 as ZSTD_CONTENTSIZE_UNKNOWN, but 2261 * ZSTD_CCtx_setPledgedSrcSize() does not do the same, so ZSTD_CONTENTSIZE_UNKNOWN must be 2262 * explicitly specified. 2263 * 2264 * start a new frame, using same parameters from previous frame. 2265 * This is typically useful to skip dictionary loading stage, since it will re-use it in-place. 2266 * Note that zcs must be init at least once before using ZSTD_resetCStream(). 2267 * If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN. 2268 * If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end. 2269 * For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs, 2270 * but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead. 2271 * @return : 0, or an error code (which can be tested using ZSTD_isError()) 2272 * This prototype will generate compilation warnings. 2273 */ 2274 ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") 2275 size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize); 2276 2277 2278 typedef struct { 2279 unsigned long long ingested; /* nb input bytes read and buffered */ 2280 unsigned long long consumed; /* nb input bytes actually compressed */ 2281 unsigned long long produced; /* nb of compressed bytes generated and buffered */ 2282 unsigned long long flushed; /* nb of compressed bytes flushed : not provided; can be tracked from caller side */ 2283 unsigned currentJobID; /* MT only : latest started job nb */ 2284 unsigned nbActiveWorkers; /* MT only : nb of workers actively compressing at probe time */ 2285 } ZSTD_frameProgression; 2286 2287 /* ZSTD_getFrameProgression() : 2288 * tells how much data has been ingested (read from input) 2289 * consumed (input actually compressed) and produced (output) for current frame. 2290 * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed. 2291 * Aggregates progression inside active worker threads. 2292 */ 2293 ZSTDLIB_STATIC_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx); 2294 2295 /*! ZSTD_toFlushNow() : 2296 * Tell how many bytes are ready to be flushed immediately. 2297 * Useful for multithreading scenarios (nbWorkers >= 1). 2298 * Probe the oldest active job, defined as oldest job not yet entirely flushed, 2299 * and check its output buffer. 2300 * @return : amount of data stored in oldest job and ready to be flushed immediately. 2301 * if @return == 0, it means either : 2302 * + there is no active job (could be checked with ZSTD_frameProgression()), or 2303 * + oldest job is still actively compressing data, 2304 * but everything it has produced has also been flushed so far, 2305 * therefore flush speed is limited by production speed of oldest job 2306 * irrespective of the speed of concurrent (and newer) jobs. 2307 */ 2308 ZSTDLIB_STATIC_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx); 2309 2310 2311 /*===== Advanced Streaming decompression functions =====*/ 2312 2313 /*! 2314 * This function is deprecated, and is equivalent to: 2315 * 2316 * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); 2317 * ZSTD_DCtx_loadDictionary(zds, dict, dictSize); 2318 * 2319 * note: no dictionary will be used if dict == NULL or dictSize < 8 2320 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2321 */ 2322 ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); 2323 2324 /*! 2325 * This function is deprecated, and is equivalent to: 2326 * 2327 * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); 2328 * ZSTD_DCtx_refDDict(zds, ddict); 2329 * 2330 * note : ddict is referenced, it must outlive decompression session 2331 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2332 */ 2333 ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict); 2334 2335 /*! 2336 * This function is deprecated, and is equivalent to: 2337 * 2338 * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); 2339 * 2340 * re-use decompression parameters from previous init; saves dictionary loading 2341 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2342 */ 2343 ZSTDLIB_STATIC_API size_t ZSTD_resetDStream(ZSTD_DStream* zds); 2344 2345 2346 /* ******************************************************************* 2347 * Buffer-less and synchronous inner streaming functions 2348 * 2349 * This is an advanced API, giving full control over buffer management, for users which need direct control over memory. 2350 * But it's also a complex one, with several restrictions, documented below. 2351 * Prefer normal streaming API for an easier experience. 2352 ********************************************************************* */ 2353 2354 /* 2355 Buffer-less streaming compression (synchronous mode) 2356 2357 A ZSTD_CCtx object is required to track streaming operations. 2358 Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource. 2359 ZSTD_CCtx object can be re-used multiple times within successive compression operations. 2360 2361 Start by initializing a context. 2362 Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression. 2363 It's also possible to duplicate a reference context which has already been initialized, using ZSTD_copyCCtx() 2364 2365 Then, consume your input using ZSTD_compressContinue(). 2366 There are some important considerations to keep in mind when using this advanced function : 2367 - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only. 2368 - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks. 2369 - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario. 2370 Worst case evaluation is provided by ZSTD_compressBound(). 2371 ZSTD_compressContinue() doesn't guarantee recover after a failed compression. 2372 - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog). 2373 It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks) 2374 - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps. 2375 In which case, it will "discard" the relevant memory section from its history. 2376 2377 Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum. 2378 It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame. 2379 Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders. 2380 2381 `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again. 2382 */ 2383 2384 /*===== Buffer-less streaming compression functions =====*/ 2385 ZSTDLIB_STATIC_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel); 2386 ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel); 2387 ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /*< note: fails if cdict==NULL */ 2388 ZSTDLIB_STATIC_API size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /*< note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */ 2389 2390 ZSTDLIB_STATIC_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2391 ZSTDLIB_STATIC_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2392 2393 /* The ZSTD_compressBegin_advanced() and ZSTD_compressBegin_usingCDict_advanced() are now DEPRECATED and will generate a compiler warning */ 2394 ZSTD_DEPRECATED("use advanced API to access custom parameters") 2395 size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /*< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */ 2396 ZSTD_DEPRECATED("use advanced API to access custom parameters") 2397 size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize); /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */ 2398 /* 2399 Buffer-less streaming decompression (synchronous mode) 2400 2401 A ZSTD_DCtx object is required to track streaming operations. 2402 Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it. 2403 A ZSTD_DCtx object can be re-used multiple times. 2404 2405 First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader(). 2406 Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough. 2407 Data fragment must be large enough to ensure successful decoding. 2408 `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough. 2409 @result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled. 2410 >0 : `srcSize` is too small, please provide at least @result bytes on next attempt. 2411 errorCode, which can be tested using ZSTD_isError(). 2412 2413 It fills a ZSTD_frameHeader structure with important information to correctly decode the frame, 2414 such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`). 2415 Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information. 2416 As a consequence, check that values remain within valid application range. 2417 For example, do not allocate memory blindly, check that `windowSize` is within expectation. 2418 Each application can set its own limits, depending on local restrictions. 2419 For extended interoperability, it is recommended to support `windowSize` of at least 8 MB. 2420 2421 ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes. 2422 ZSTD_decompressContinue() is very sensitive to contiguity, 2423 if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place, 2424 or that previous contiguous segment is large enough to properly handle maximum back-reference distance. 2425 There are multiple ways to guarantee this condition. 2426 2427 The most memory efficient way is to use a round buffer of sufficient size. 2428 Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(), 2429 which can @return an error code if required value is too large for current system (in 32-bits mode). 2430 In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one, 2431 up to the moment there is not enough room left in the buffer to guarantee decoding another full block, 2432 which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`. 2433 At which point, decoding can resume from the beginning of the buffer. 2434 Note that already decoded data stored in the buffer should be flushed before being overwritten. 2435 2436 There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory. 2437 2438 Finally, if you control the compression process, you can also ignore all buffer size rules, 2439 as long as the encoder and decoder progress in "lock-step", 2440 aka use exactly the same buffer sizes, break contiguity at the same place, etc. 2441 2442 Once buffers are setup, start decompression, with ZSTD_decompressBegin(). 2443 If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict(). 2444 2445 Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively. 2446 ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue(). 2447 ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail. 2448 2449 @result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity). 2450 It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item. 2451 It can also be an error code, which can be tested with ZSTD_isError(). 2452 2453 A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. 2454 Context can then be reset to start a new decompression. 2455 2456 Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType(). 2457 This information is not required to properly decode a frame. 2458 2459 == Special case : skippable frames == 2460 2461 Skippable frames allow integration of user-defined data into a flow of concatenated frames. 2462 Skippable frames will be ignored (skipped) by decompressor. 2463 The format of skippable frames is as follows : 2464 a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F 2465 b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits 2466 c) Frame Content - any content (User Data) of length equal to Frame Size 2467 For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame. 2468 For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content. 2469 */ 2470 2471 /*===== Buffer-less streaming decompression functions =====*/ 2472 typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e; 2473 typedef struct { 2474 unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */ 2475 unsigned long long windowSize; /* can be very large, up to <= frameContentSize */ 2476 unsigned blockSizeMax; 2477 ZSTD_frameType_e frameType; /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */ 2478 unsigned headerSize; 2479 unsigned dictID; 2480 unsigned checksumFlag; 2481 } ZSTD_frameHeader; 2482 2483 /*! ZSTD_getFrameHeader() : 2484 * decode Frame Header, or requires larger `srcSize`. 2485 * @return : 0, `zfhPtr` is correctly filled, 2486 * >0, `srcSize` is too small, value is wanted `srcSize` amount, 2487 * or an error code, which can be tested using ZSTD_isError() */ 2488 ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize); /*< doesn't consume input */ 2489 /*! ZSTD_getFrameHeader_advanced() : 2490 * same as ZSTD_getFrameHeader(), 2491 * with added capability to select a format (like ZSTD_f_zstd1_magicless) */ 2492 ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format); 2493 ZSTDLIB_STATIC_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /*< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */ 2494 2495 ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx); 2496 ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); 2497 ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); 2498 2499 ZSTDLIB_STATIC_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx); 2500 ZSTDLIB_STATIC_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2501 2502 /* misc */ 2503 ZSTDLIB_STATIC_API void ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx); 2504 typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e; 2505 ZSTDLIB_STATIC_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx); 2506 2507 2508 2509 2510 /* ============================ */ 2511 /* Block level API */ 2512 /* ============================ */ 2513 2514 /*! 2515 Block functions produce and decode raw zstd blocks, without frame metadata. 2516 Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes). 2517 But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes. 2518 2519 A few rules to respect : 2520 - Compressing and decompressing require a context structure 2521 + Use ZSTD_createCCtx() and ZSTD_createDCtx() 2522 - It is necessary to init context before starting 2523 + compression : any ZSTD_compressBegin*() variant, including with dictionary 2524 + decompression : any ZSTD_decompressBegin*() variant, including with dictionary 2525 + copyCCtx() and copyDCtx() can be used too 2526 - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB 2527 + If input is larger than a block size, it's necessary to split input data into multiple blocks 2528 + For inputs larger than a single block, consider using regular ZSTD_compress() instead. 2529 Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block. 2530 - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) ! 2531 ===> In which case, nothing is produced into `dst` ! 2532 + User __must__ test for such outcome and deal directly with uncompressed data 2533 + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0. 2534 Doing so would mess up with statistics history, leading to potential data corruption. 2535 + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !! 2536 + In case of multiple successive blocks, should some of them be uncompressed, 2537 decoder must be informed of their existence in order to follow proper history. 2538 Use ZSTD_insertBlock() for such a case. 2539 */ 2540 2541 /*===== Raw zstd block functions =====*/ 2542 ZSTDLIB_STATIC_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx); 2543 ZSTDLIB_STATIC_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2544 ZSTDLIB_STATIC_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2545 ZSTDLIB_STATIC_API size_t ZSTD_insertBlock (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize); /*< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */ 2546 2547 2548 #endif /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */ 2549 2550