1# This file contains help messages for missing external blobs. Each message has 2# a tag (MUST be just lower-case text, digits and hyphens) starting in column 1, 3# followed by a colon (:) to indicate its start. The message can include any 4# number of lines, including blank lines. 5# 6# When looking for a tag, Binman uses the value of 'missing-msg' for the entry, 7# the entry name or the entry type, in that order 8 9atf-bl31: 10See the documentation for your board. You may need to build ARM Trusted 11Firmware and build with BL31=/path/to/bl31.bin 12 13atf-bl31-sunxi: 14Please read the section on ARM Trusted Firmware (ATF) in 15board/sunxi/README.sunxi64 16 17scp-sunxi: 18SCP firmware is required for system suspend, but is otherwise optional. 19Please read the section on SCP firmware in board/sunxi/README.sunxi64 20 21iot2050-seboot: 22See the documentation for IOT2050 board. Your image is missing SEBoot 23which is mandatory for board startup. Prebuilt SEBoot located at 24meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin. 25 26iot2050-otpcmd: 27See the documentation for IOT2050 board. Your image is missing OTP command data 28block which is used for provisioning the customer keys to the board. 29Please refer to 30meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otpcmd.sh 31for how to generate this binary. If you are not using secure boot or do not 32intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD. 33 34k3-rti-wdt-firmware: 35If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for 36the R5F core(s) to trigger the system reset. One possible source is 37https://github.com/siemens/k3-rti-wdt. 38 39rockchip-tpl: 40An external TPL is required to initialize DRAM. Get the external TPL 41binary and build with ROCKCHIP_TPL=/path/to/ddr.bin. One possible source 42for the external TPL binary is https://github.com/rockchip-linux/rkbin. 43 44tee-os: 45See the documentation for your board. You may need to build Open Portable 46Trusted Execution Environment (OP-TEE) with TEE=/path/to/tee.bin 47 48opensbi: 49See the documentation for your board. The OpenSBI git repo is at 50https://github.com/riscv/opensbi.git 51You may need to build fw_dynamic.bin first and re-build u-boot with 52OPENSBI=/path/to/fw_dynamic.bin 53