/*****************************************************************************
 * Copyright (c) 2022, Nations Technologies Inc.
 *
 * All rights reserved.
 * ****************************************************************************
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Nations' name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY NATIONS "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL NATIONS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ****************************************************************************/

/**
 * @file misc.c
 * @author Nations
 * @version v1.2.0
 *
 * @copyright Copyright (c) 2022, Nations Technologies Inc. All rights reserved.
 */
#include "misc.h"

/** @addtogroup N32G43x_StdPeriph_Driver
 * @{
 */

/** @addtogroup MISC
 * @brief MISC driver modules
 * @{
 */

/** @addtogroup MISC_Private_TypesDefinitions
 * @{
 */

/**
 * @}
 */

/** @addtogroup MISC_Private_Defines
 * @{
 */

#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
/**
 * @}
 */

/** @addtogroup MISC_Private_Macros
 * @{
 */

/**
 * @}
 */

/** @addtogroup MISC_Private_Variables
 * @{
 */

/**
 * @}
 */

/** @addtogroup MISC_Private_FunctionPrototypes
 * @{
 */

/**
 * @}
 */

/** @addtogroup MISC_Private_Functions
 * @{
 */

/**
 * @brief  Configures the priority grouping: pre-emption priority and subpriority.
 * @param NVIC_PriorityGroup specifies the priority grouping bits length.
 *   This parameter can be one of the following values:
 *     @arg NVIC_PriorityGroup_0 0 bits for pre-emption priority
 *                                4 bits for subpriority
 *     @arg NVIC_PriorityGroup_1 1 bits for pre-emption priority
 *                                3 bits for subpriority
 *     @arg NVIC_PriorityGroup_2 2 bits for pre-emption priority
 *                                2 bits for subpriority
 *     @arg NVIC_PriorityGroup_3 3 bits for pre-emption priority
 *                                1 bits for subpriority
 *     @arg NVIC_PriorityGroup_4 4 bits for pre-emption priority
 *                                0 bits for subpriority
 */
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
{
    /* Check the parameters */
    assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));

    /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
    SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
}

/**
 * @brief  Initializes the NVIC peripheral according to the specified
 *         parameters in the NVIC_InitStruct.
 * @param NVIC_InitStruct pointer to a NVIC_InitType structure that contains
 *         the configuration information for the specified NVIC peripheral.
 */
void NVIC_Init(NVIC_InitType* NVIC_InitStruct)
{
    uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;

    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
    assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
    assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));

    if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
    {
        /* Compute the Corresponding IRQ Priority --------------------------------*/
        tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700)) >> 0x08;
        tmppre      = (0x4 - tmppriority);
        tmpsub      = tmpsub >> tmppriority;

        tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
        tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
        tmppriority = tmppriority << 0x04;

        NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;

        /* Enable the Selected IRQ Channels --------------------------------------*/
        NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = (uint32_t)0x01
                                                               << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
    }
    else
    {
        /* Disable the Selected IRQ Channels -------------------------------------*/
        NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = (uint32_t)0x01
                                                               << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
    }
}

/**
 * @brief  Sets the vector table location and Offset.
 * @param NVIC_VectTab specifies if the vector table is in RAM or FLASH memory.
 *   This parameter can be one of the following values:
 *     @arg NVIC_VectTab_RAM
 *     @arg NVIC_VectTab_FLASH
 * @param Offset Vector Table base offset field. This value must be a multiple
 *         of 0x200.
 */
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
{
    /* Check the parameters */
    assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
    assert_param(IS_NVIC_OFFSET(Offset));

    SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
}

/**
 * @brief  Selects the condition for the system to enter low power mode.
 * @param LowPowerMode Specifies the new mode for the system to enter low power mode.
 *   This parameter can be one of the following values:
 *     @arg NVIC_LP_SEVONPEND
 *     @arg NVIC_LP_SLEEPDEEP
 *     @arg NVIC_LP_SLEEPONEXIT
 * @param Cmd new state of LP condition. This parameter can be: ENABLE or DISABLE.
 */
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState Cmd)
{
    /* Check the parameters */
    assert_param(IS_NVIC_LP(LowPowerMode));
    assert_param(IS_FUNCTIONAL_STATE(Cmd));

    if (Cmd != DISABLE)
    {
        SCB->SCR |= LowPowerMode;
    }
    else
    {
        SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
    }
}

/**
 * @brief  Configures the SysTick clock source.
 * @param SysTick_CLKSource specifies the SysTick clock source.
 *   This parameter can be one of the following values:
 *     @arg SysTick_CLKSource_HCLK_Div8 AHB clock divided by 8 selected as SysTick clock source.
 *     @arg SysTick_CLKSource_HCLK AHB clock selected as SysTick clock source.
 */
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
{
    /* Check the parameters */
    assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
    if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
    {
        SysTick->CTRL |= SysTick_CLKSource_HCLK;
    }
    else
    {
        SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
    }
}

/**
 * @}
 */

/**
 * @}
 */

/**
 * @}
 */