1 /** 2 ****************************************************************************** 3 * @file stm32l1xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32l1xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * <h2><center>© Copyright (c) 2017 STMicroelectronics. 12 * All rights reserved.</center></h2> 13 * 14 * This software component is licensed by ST under BSD 3-Clause license, 15 * the "License"; You may not use this file except in compliance with the 16 * License. You may obtain a copy of the License at: 17 * opensource.org/licenses/BSD-3-Clause 18 * 19 ****************************************************************************** 20 */ 21 22 /* Define to prevent recursive inclusion -------------------------------------*/ 23 #ifndef __STM32L1xx_HAL_CONF_H 24 #define __STM32L1xx_HAL_CONF_H 25 26 #ifdef __cplusplus 27 extern "C" { 28 #endif 29 30 /* Exported types ------------------------------------------------------------*/ 31 /* Exported constants --------------------------------------------------------*/ 32 33 /* ########################## Module Selection ############################## */ 34 /** 35 * @brief This is the list of modules to be used in the HAL driver 36 */ 37 #define HAL_MODULE_ENABLED 38 #define HAL_ADC_MODULE_ENABLED 39 #define HAL_COMP_MODULE_ENABLED 40 #define HAL_CORTEX_MODULE_ENABLED 41 #define HAL_CRC_MODULE_ENABLED 42 #define HAL_CRYP_MODULE_ENABLED 43 #define HAL_DAC_MODULE_ENABLED 44 #define HAL_DMA_MODULE_ENABLED 45 #define HAL_FLASH_MODULE_ENABLED 46 #define HAL_GPIO_MODULE_ENABLED 47 #define HAL_EXTI_MODULE_ENABLED 48 #define HAL_I2C_MODULE_ENABLED 49 #define HAL_I2S_MODULE_ENABLED 50 #define HAL_IRDA_MODULE_ENABLED 51 #define HAL_IWDG_MODULE_ENABLED 52 #define HAL_LCD_MODULE_ENABLED 53 #define HAL_NOR_MODULE_ENABLED 54 #define HAL_OPAMP_MODULE_ENABLED 55 #define HAL_PCD_MODULE_ENABLED 56 #define HAL_PWR_MODULE_ENABLED 57 #define HAL_RCC_MODULE_ENABLED 58 #define HAL_RTC_MODULE_ENABLED 59 #define HAL_SD_MODULE_ENABLED 60 #define HAL_SMARTCARD_MODULE_ENABLED 61 #define HAL_SPI_MODULE_ENABLED 62 #define HAL_SRAM_MODULE_ENABLED 63 #define HAL_TIM_MODULE_ENABLED 64 #define HAL_UART_MODULE_ENABLED 65 #define HAL_USART_MODULE_ENABLED 66 #define HAL_WWDG_MODULE_ENABLED 67 68 /* ########################## Oscillator Values adaptation ####################*/ 69 /** 70 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 71 * This value is used by the RCC HAL module to compute the system frequency 72 * (when HSE is used as system clock source, directly or through the PLL). 73 */ 74 #if !defined (HSE_VALUE) 75 #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ 76 #endif /* HSE_VALUE */ 77 78 #if !defined (HSE_STARTUP_TIMEOUT) 79 #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ 80 #endif /* HSE_STARTUP_TIMEOUT */ 81 82 /** 83 * @brief Internal Multiple Speed oscillator (MSI) default value. 84 * This value is the default MSI range value after Reset. 85 */ 86 #if !defined (MSI_VALUE) 87 #define MSI_VALUE (2097000U) /*!< Value of the Internal oscillator in Hz*/ 88 #endif /* MSI_VALUE */ 89 /** 90 * @brief Internal High Speed oscillator (HSI) value. 91 * This value is used by the RCC HAL module to compute the system frequency 92 * (when HSI is used as system clock source, directly or through the PLL). 93 */ 94 #if !defined (HSI_VALUE) 95 #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ 96 #endif /* HSI_VALUE */ 97 98 /** 99 * @brief Internal Low Speed oscillator (LSI) value. 100 */ 101 #if !defined (LSI_VALUE) 102 #define LSI_VALUE (37000U) /*!< LSI Typical Value in Hz*/ 103 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 104 The real value may vary depending on the variations 105 in voltage and temperature.*/ 106 107 /** 108 * @brief External Low Speed oscillator (LSE) value. 109 */ 110 #if !defined (LSE_VALUE) 111 #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz*/ 112 #endif /* LSE_VALUE */ 113 114 /** 115 * @brief Time out for LSE start up value in ms. 116 */ 117 #if !defined (LSE_STARTUP_TIMEOUT) 118 #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ 119 #endif /* LSE_STARTUP_TIMEOUT */ 120 121 122 /* Tip: To avoid modifying this file each time you need to use different HSE, 123 === you can define the HSE value in your toolchain compiler preprocessor. */ 124 125 /* ########################### System Configuration ######################### */ 126 /** 127 * @brief This is the HAL system configuration section 128 */ 129 #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ 130 #define TICK_INT_PRIORITY (0x000FU) /*!< tick interrupt priority */ 131 #define USE_RTOS 0U 132 #define PREFETCH_ENABLE 1U 133 #define INSTRUCTION_CACHE_ENABLE 0U 134 #define DATA_CACHE_ENABLE 0U 135 136 /* ########################## Assert Selection ############################## */ 137 /** 138 * @brief Uncomment the line below to expanse the "assert_param" macro in the 139 * HAL drivers code 140 */ 141 /*#define USE_FULL_ASSERT 1U*/ 142 143 /* ################## Register callback feature configuration ############### */ 144 /** 145 * @brief Set below the peripheral configuration to "1U" to add the support 146 * of HAL callback registration/deregistration feature for the HAL 147 * driver(s). This allows user application to provide specific callback 148 * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting 149 * the default weak callback functions (see each stm32l0xx_hal_ppp.h file 150 * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef 151 * for each PPP peripheral). 152 */ 153 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 154 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 155 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 156 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 157 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U 158 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 159 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 160 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 161 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 162 #define USE_HAL_SDMMC_REGISTER_CALLBACKS 0U 163 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 164 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 165 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 166 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 167 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 168 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 169 170 /* ################## SPI peripheral configuration ########################## */ 171 172 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 173 * Activated: CRC code is present inside driver 174 * Deactivated: CRC code cleaned from driver 175 */ 176 177 #define USE_SPI_CRC 1U 178 179 /* Includes ------------------------------------------------------------------*/ 180 /** 181 * @brief Include module's header file 182 */ 183 184 #ifdef HAL_RCC_MODULE_ENABLED 185 #include "stm32l1xx_hal_rcc.h" 186 #endif /* HAL_RCC_MODULE_ENABLED */ 187 188 #ifdef HAL_GPIO_MODULE_ENABLED 189 #include "stm32l1xx_hal_gpio.h" 190 #endif /* HAL_GPIO_MODULE_ENABLED */ 191 192 #ifdef HAL_EXTI_MODULE_ENABLED 193 #include "stm32l1xx_hal_exti.h" 194 #endif /* HAL_EXTI_MODULE_ENABLED */ 195 196 #ifdef HAL_DMA_MODULE_ENABLED 197 #include "stm32l1xx_hal_dma.h" 198 #endif /* HAL_DMA_MODULE_ENABLED */ 199 200 #ifdef HAL_CORTEX_MODULE_ENABLED 201 #include "stm32l1xx_hal_cortex.h" 202 #endif /* HAL_CORTEX_MODULE_ENABLED */ 203 204 #ifdef HAL_ADC_MODULE_ENABLED 205 #include "stm32l1xx_hal_adc.h" 206 #endif /* HAL_ADC_MODULE_ENABLED */ 207 208 #ifdef HAL_COMP_MODULE_ENABLED 209 #include "stm32l1xx_hal_comp.h" 210 #endif /* HAL_COMP_MODULE_ENABLED */ 211 212 #ifdef HAL_CRC_MODULE_ENABLED 213 #include "stm32l1xx_hal_crc.h" 214 #endif /* HAL_CRC_MODULE_ENABLED */ 215 216 #ifdef HAL_CRYP_MODULE_ENABLED 217 #include "stm32l1xx_hal_cryp.h" 218 #endif /* HAL_CRYP_MODULE_ENABLED */ 219 220 #ifdef HAL_DAC_MODULE_ENABLED 221 #include "stm32l1xx_hal_dac.h" 222 #endif /* HAL_DAC_MODULE_ENABLED */ 223 224 #ifdef HAL_FLASH_MODULE_ENABLED 225 #include "stm32l1xx_hal_flash.h" 226 #endif /* HAL_FLASH_MODULE_ENABLED */ 227 228 #ifdef HAL_SRAM_MODULE_ENABLED 229 #include "stm32l1xx_hal_sram.h" 230 #endif /* HAL_SRAM_MODULE_ENABLED */ 231 232 #ifdef HAL_NOR_MODULE_ENABLED 233 #include "stm32l1xx_hal_nor.h" 234 #endif /* HAL_NOR_MODULE_ENABLED */ 235 236 #ifdef HAL_I2C_MODULE_ENABLED 237 #include "stm32l1xx_hal_i2c.h" 238 #endif /* HAL_I2C_MODULE_ENABLED */ 239 240 #ifdef HAL_I2S_MODULE_ENABLED 241 #include "stm32l1xx_hal_i2s.h" 242 #endif /* HAL_I2S_MODULE_ENABLED */ 243 244 #ifdef HAL_IWDG_MODULE_ENABLED 245 #include "stm32l1xx_hal_iwdg.h" 246 #endif /* HAL_IWDG_MODULE_ENABLED */ 247 248 #ifdef HAL_LCD_MODULE_ENABLED 249 #include "stm32l1xx_hal_lcd.h" 250 #endif /* HAL_LCD_MODULE_ENABLED */ 251 252 #ifdef HAL_OPAMP_MODULE_ENABLED 253 #include "stm32l1xx_hal_opamp.h" 254 #endif /* HAL_OPAMP_MODULE_ENABLED */ 255 256 #ifdef HAL_PWR_MODULE_ENABLED 257 #include "stm32l1xx_hal_pwr.h" 258 #endif /* HAL_PWR_MODULE_ENABLED */ 259 260 #ifdef HAL_RTC_MODULE_ENABLED 261 #include "stm32l1xx_hal_rtc.h" 262 #endif /* HAL_RTC_MODULE_ENABLED */ 263 264 #ifdef HAL_SD_MODULE_ENABLED 265 #include "stm32l1xx_hal_sd.h" 266 #endif /* HAL_SD_MODULE_ENABLED */ 267 268 #ifdef HAL_SPI_MODULE_ENABLED 269 #include "stm32l1xx_hal_spi.h" 270 #endif /* HAL_SPI_MODULE_ENABLED */ 271 272 #ifdef HAL_TIM_MODULE_ENABLED 273 #include "stm32l1xx_hal_tim.h" 274 #endif /* HAL_TIM_MODULE_ENABLED */ 275 276 #ifdef HAL_UART_MODULE_ENABLED 277 #include "stm32l1xx_hal_uart.h" 278 #endif /* HAL_UART_MODULE_ENABLED */ 279 280 #ifdef HAL_USART_MODULE_ENABLED 281 #include "stm32l1xx_hal_usart.h" 282 #endif /* HAL_USART_MODULE_ENABLED */ 283 284 #ifdef HAL_IRDA_MODULE_ENABLED 285 #include "stm32l1xx_hal_irda.h" 286 #endif /* HAL_IRDA_MODULE_ENABLED */ 287 288 #ifdef HAL_SMARTCARD_MODULE_ENABLED 289 #include "stm32l1xx_hal_smartcard.h" 290 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 291 292 #ifdef HAL_WWDG_MODULE_ENABLED 293 #include "stm32l1xx_hal_wwdg.h" 294 #endif /* HAL_WWDG_MODULE_ENABLED */ 295 296 #ifdef HAL_PCD_MODULE_ENABLED 297 #include "stm32l1xx_hal_pcd.h" 298 #endif /* HAL_PCD_MODULE_ENABLED */ 299 300 /* Exported macro ------------------------------------------------------------*/ 301 #ifdef USE_FULL_ASSERT 302 /** 303 * @brief The assert_param macro is used for function's parameters check. 304 * @param expr If expr is false, it calls assert_failed function 305 * which reports the name of the source file and the source 306 * line number of the call that failed. 307 * If expr is true, it returns no value. 308 * @retval None 309 */ 310 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 311 /* Exported functions ------------------------------------------------------- */ 312 void assert_failed(uint8_t* file, uint32_t line); 313 #else 314 #define assert_param(expr) ((void)0U) 315 #endif /* USE_FULL_ASSERT */ 316 317 #ifdef __cplusplus 318 } 319 #endif 320 321 #endif /* __STM32L1xx_HAL_CONF_H */ 322 323 324 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 325