1 /** 2 ****************************************************************************** 3 * @file stm32mp1xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© Copyright (c) 2020 STMicroelectronics. 9 * All rights reserved.</center></h2> 10 * 11 * This software component is licensed by ST under BSD 3-Clause license, 12 * the "License"; You may not use this file except in compliance with the 13 * License. You may obtain a copy of the License at: 14 * opensource.org/licenses/BSD-3-Clause 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32MP1xx_HAL_CONF_H 21 #define STM32MP1xx_HAL_CONF_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Exported types ------------------------------------------------------------*/ 28 /* Exported constants --------------------------------------------------------*/ 29 30 /* ########################## Module Selection ############################## */ 31 /** 32 * @brief This is the list of modules to be used in the HAL driver 33 */ 34 #define HAL_MODULE_ENABLED 35 #define HAL_ADC_MODULE_ENABLED 36 /*#define HAL_CEC_MODULE_ENABLED */ 37 #define HAL_CRC_MODULE_ENABLED 38 #define HAL_CRYP_MODULE_ENABLED 39 #define HAL_DAC_MODULE_ENABLED 40 #define HAL_DCMI_MODULE_ENABLED 41 /*#define HAL_DSI_MODULE_ENABLED */ 42 #define HAL_DFSDM_MODULE_ENABLED 43 /*#define HAL_DTS_MODULE_ENABLED */ 44 /*#define HAL_ETH_MODULE_ENABLED */ 45 #define HAL_FDCAN_MODULE_ENABLED 46 #define HAL_HASH_MODULE_ENABLED 47 /*#define HAL_HCD_MODULE_ENABLED */ 48 #define HAL_HSEM_MODULE_ENABLED 49 #define HAL_I2C_MODULE_ENABLED 50 /*#define HAL_I2S_MODULE_ENABLED */ 51 #define HAL_IPCC_MODULE_ENABLED 52 /*#define HAL_IWDG_MODULE_ENABLED */ 53 #define HAL_LPTIM_MODULE_ENABLED 54 /*#define HAL_LTDC_MODULE_ENABLED */ 55 /*#define HAL_NAND_MODULE_ENABLED */ 56 /*#define HAL_NOR_MODULE_ENABLED */ 57 /*#define HAL_PCD_MODULE_ENABLED */ 58 #define HAL_QSPI_MODULE_ENABLED 59 #define HAL_RNG_MODULE_ENABLED 60 #define HAL_SAI_MODULE_ENABLED 61 #define HAL_SD_MODULE_ENABLED 62 /*#define HAL_MMC_MODULE_ENABLED */ 63 /*#define HAL_RTC_MODULE_ENABLED */ 64 /*#define HAL_SMBUS_MODULE_ENABLED */ 65 #define HAL_SPDIFRX_MODULE_ENABLED 66 #define HAL_SPI_MODULE_ENABLED 67 /*#define HAL_SRAM_MODULE_ENABLED */ 68 /*#define HAL_TAMP_MODULE_ENABLED */ 69 #define HAL_TIM_MODULE_ENABLED 70 #define HAL_UART_MODULE_ENABLED 71 /*#define HAL_USART_MODULE_ENABLED */ 72 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 73 #define HAL_WWDG_MODULE_ENABLED 74 #define HAL_GPIO_MODULE_ENABLED 75 #define HAL_EXTI_MODULE_ENABLED 76 #define HAL_DMA_MODULE_ENABLED 77 #define HAL_MDMA_MODULE_ENABLED 78 #define HAL_RCC_MODULE_ENABLED 79 #define HAL_PWR_MODULE_ENABLED 80 #define HAL_CORTEX_MODULE_ENABLED 81 82 /* ########################## Register Callbacks selection ############################## */ 83 /** 84 * @brief This is the list of modules where register callback can be used 85 */ 86 #define USE_HAL_ADC_REGISTER_CALLBACKS 0u 87 #define USE_HAL_CEC_REGISTER_CALLBACKS 0u 88 #define USE_HAL_DAC_REGISTER_CALLBACKS 0u 89 #define USE_HAL_I2C_REGISTER_CALLBACKS 0u 90 #define USE_HAL_RNG_REGISTER_CALLBACKS 0u 91 #define USE_HAL_SPI_REGISTER_CALLBACKS 0u 92 #define USE_HAL_UART_REGISTER_CALLBACKS 0u 93 #define USE_HAL_USART_REGISTER_CALLBACKS 0u 94 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u 95 96 /* ########################## Oscillator Values adaptation ####################*/ 97 /** 98 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 99 * This value is used by the RCC HAL module to compute the system frequency 100 * (when HSE is used as system clock source, directly or through the PLL). 101 */ 102 #if !defined (HSE_VALUE) 103 #define HSE_VALUE (24000000U) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */ 104 #endif /* HSE_VALUE */ 105 106 #if !defined (HSE_STARTUP_TIMEOUT) 107 #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ 108 #endif /* HSE_STARTUP_TIMEOUT */ 109 110 /** 111 * @brief Internal High Speed oscillator (HSI) value. 112 * This value is used by the RCC HAL module to compute the system frequency 113 * (when HSI is used as system clock source, directly or through the PLL). 114 */ 115 #if !defined (HSI_VALUE) 116 #define HSI_VALUE (64000000U) /*!< Value of the Internal oscillator in Hz*/ 117 #endif /* HSI_VALUE */ 118 119 /** 120 * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 121 * Timeout value 122 */ 123 #if !defined (HSI_STARTUP_TIMEOUT) 124 #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ 125 #endif /* HSI_STARTUP_TIMEOUT */ 126 127 /** 128 * @brief Internal Low Speed oscillator (LSI) value. 129 */ 130 #if !defined (LSI_VALUE) 131 #define LSI_VALUE 32000U 132 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 133 The real value may vary depending on the variations 134 in voltage and temperature. */ 135 136 /** 137 * @brief External Low Speed oscillator (LSE) value. 138 * This value is used by the UART, RTC HAL module to compute the system frequency 139 */ 140 #if !defined (LSE_VALUE) 141 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 142 #endif /* LSE_VALUE */ 143 144 #if !defined (LSE_STARTUP_TIMEOUT) 145 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 146 #endif /* LSE_STARTUP_TIMEOUT */ 147 148 /** 149 * @brief Internal oscillator (CSI) default value. 150 * This value is the default CSI value after Reset. 151 */ 152 #if !defined (CSI_VALUE) 153 #define CSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ 154 #endif /* CSI_VALUE */ 155 156 #define USE_SD_TRANSCEIVER 1U 157 158 /** 159 * @brief External clock source for I2S peripheral 160 * This value is used by the I2S HAL module to compute the I2S clock source 161 * frequency, this source is inserted directly through I2S_CKIN pad. 162 */ 163 #if !defined (EXTERNAL_CLOCK_VALUE) 164 #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ 165 #endif /* EXTERNAL_CLOCK_VALUE */ 166 167 /* Tip: To avoid modifying this file each time you need to use different HSE, 168 === you can define the HSE value in your toolchain compiler preprocessor. */ 169 170 /* ########################### System Configuration ######################### */ 171 /** 172 * @brief This is the HAL system configuration section 173 */ 174 #define VDD_VALUE 3300U /*!< Value of VDD in mv */ 175 #define TICK_INT_PRIORITY 0U /*!< tick interrupt priority (lowest by default) */ 176 /* Warning: Must be set to higher priority for HAL_Delay() */ 177 /* and HAL_GetTick() usage under interrupt context */ 178 #define USE_RTOS 0U 179 #define PREFETCH_ENABLE 0U 180 #define INSTRUCTION_CACHE_ENABLE 0U 181 #define DATA_CACHE_ENABLE 0U 182 183 /* ########################## Assert Selection ############################## */ 184 /** 185 * @brief Uncomment the line below to expanse the "assert_param" macro in the 186 * HAL drivers code 187 */ 188 /* #define USE_FULL_ASSERT 1U */ 189 190 /* Includes ------------------------------------------------------------------*/ 191 /** 192 * @brief Include module's header file 193 */ 194 195 #ifdef HAL_RCC_MODULE_ENABLED 196 #include "stm32mp1xx_hal_rcc.h" 197 #endif /* HAL_RCC_MODULE_ENABLED */ 198 199 #ifdef HAL_EXTI_MODULE_ENABLED 200 #include "stm32mp1xx_hal_exti.h" 201 #endif /* HAL_EXTI_MODULE_ENABLED */ 202 203 #ifdef HAL_GPIO_MODULE_ENABLED 204 #include "stm32mp1xx_hal_gpio.h" 205 #endif /* HAL_GPIO_MODULE_ENABLED */ 206 207 #ifdef HAL_HSEM_MODULE_ENABLED 208 #include "stm32mp1xx_hal_hsem.h" 209 #endif /* HAL_HSEM_MODULE_ENABLED */ 210 211 #ifdef HAL_DMA_MODULE_ENABLED 212 #include "stm32mp1xx_hal_dma.h" 213 #endif /* HAL_DMA_MODULE_ENABLED */ 214 215 #ifdef HAL_MDMA_MODULE_ENABLED 216 #include "stm32mp1xx_hal_mdma.h" 217 #endif /* HAL_MDMA_MODULE_ENABLED */ 218 219 #ifdef HAL_CORTEX_MODULE_ENABLED 220 #include "stm32mp1xx_hal_cortex.h" 221 #endif /* HAL_CORTEX_MODULE_ENABLED */ 222 223 #ifdef HAL_ADC_MODULE_ENABLED 224 #include "stm32mp1xx_hal_adc.h" 225 #endif /* HAL_ADC_MODULE_ENABLED */ 226 227 #ifdef HAL_CEC_MODULE_ENABLED 228 #include "stm32mp1xx_hal_cec.h" 229 #endif /* HAL_CEC_MODULE_ENABLED */ 230 231 #ifdef HAL_CRC_MODULE_ENABLED 232 #include "stm32mp1xx_hal_crc.h" 233 #endif /* HAL_CRC_MODULE_ENABLED */ 234 235 #ifdef HAL_CRYP_MODULE_ENABLED 236 #include "stm32mp1xx_hal_cryp.h" 237 #endif /* HAL_CRYP_MODULE_ENABLED */ 238 239 #ifdef HAL_DAC_MODULE_ENABLED 240 #include "stm32mp1xx_hal_dac.h" 241 #endif /* HAL_DAC_MODULE_ENABLED */ 242 243 #ifdef HAL_DCMI_MODULE_ENABLED 244 #include "stm32mp1xx_hal_dcmi.h" 245 #endif /* HAL_DCMI_MODULE_ENABLED */ 246 247 #ifdef HAL_DFSDM_MODULE_ENABLED 248 #include "stm32mp1xx_hal_dfsdm.h" 249 #endif /* HAL_DFSDM_MODULE_ENABLED */ 250 251 #ifdef HAL_DSI_MODULE_ENABLED 252 #include "stm32mp1xx_hal_dsi.h" 253 #endif /* HAL_DSI_MODULE_ENABLED */ 254 255 #ifdef HAL_ETH_MODULE_ENABLED 256 #include "stm32mp1xx_hal_eth.h" 257 #endif /* HAL_ETH_MODULE_ENABLED */ 258 259 #ifdef HAL_FDCAN_MODULE_ENABLED 260 #include "stm32mp1xx_hal_fdcan.h" 261 #endif /* HAL_FDCAN_MODULE_ENABLED */ 262 263 #ifdef HAL_HASH_MODULE_ENABLED 264 #include "stm32mp1xx_hal_hash.h" 265 #endif /* HAL_HASH_MODULE_ENABLED */ 266 267 #ifdef HAL_HCD_MODULE_ENABLED 268 #include "stm32mp1xx_hal_hcd.h" 269 #endif /* HAL_HASH_MODULE_ENABLED */ 270 271 #ifdef HAL_I2C_MODULE_ENABLED 272 #include "stm32mp1xx_hal_i2c.h" 273 #endif /* HAL_I2C_MODULE_ENABLED */ 274 275 #ifdef HAL_I2S_MODULE_ENABLED 276 #include "stm32mp1xx_hal_i2s.h" 277 #endif /* HAL_I2S_MODULE_ENABLED */ 278 279 #ifdef HAL_IPCC_MODULE_ENABLED 280 #include "stm32mp1xx_hal_ipcc.h" 281 #endif /* HAL_IPCC_MODULE_ENABLED */ 282 283 #ifdef HAL_IWDG_MODULE_ENABLED 284 #include "stm32mp1xx_hal_iwdg.h" 285 #endif /* HAL_IWDG_MODULE_ENABLED */ 286 287 #ifdef HAL_IWDG_MODULE_ENABLED 288 #include "stm32mp1xx_hal_iwdg.h" 289 #endif /* HAL_IWDG_MODULE_ENABLED */ 290 291 #ifdef HAL_LPTIM_MODULE_ENABLED 292 #include "stm32mp1xx_hal_lptim.h" 293 #endif /* HAL_LPTIM_MODULE_ENABLED */ 294 295 #ifdef HAL_LTDC_MODULE_ENABLED 296 #include "stm32mp1xx_hal_ltdc.h" 297 #endif /* HAL_LTDC_MODULE_ENABLED */ 298 299 #ifdef HAL_NAND_MODULE_ENABLED 300 #include "stm32mp1xx_hal_nand.h" 301 #endif /* HAL_NAND_MODULE_ENABLED */ 302 303 #ifdef HAL_NOR_MODULE_ENABLED 304 #include "stm32mp1xx_hal_nor.h" 305 #endif /* HAL_NOR_MODULE_ENABLED */ 306 307 #ifdef HAL_PCD_MODULE_ENABLED 308 #include "stm32mp1xx_hal_pcd.h" 309 #endif /* HAL_PCD_MODULE_ENABLED */ 310 311 #ifdef HAL_PWR_MODULE_ENABLED 312 #include "stm32mp1xx_hal_pwr.h" 313 #endif /* HAL_PWR_MODULE_ENABLED */ 314 315 #ifdef HAL_QSPI_MODULE_ENABLED 316 #include "stm32mp1xx_hal_qspi.h" 317 #endif /* HAL_QSPI_MODULE_ENABLED */ 318 319 #ifdef HAL_RNG_MODULE_ENABLED 320 #include "stm32mp1xx_hal_rng.h" 321 #endif /* HAL_RNG_MODULE_ENABLED */ 322 323 #ifdef HAL_SAI_MODULE_ENABLED 324 #include "stm32mp1xx_hal_sai.h" 325 #endif /* HAL_SAI_MODULE_ENABLED */ 326 327 #ifdef HAL_SD_MODULE_ENABLED 328 #include "stm32mp1xx_hal_sd.h" 329 #endif /* HAL_SD_MODULE_ENABLED */ 330 331 #ifdef HAL_SMARTCARD_MODULE_ENABLED 332 #include "stm32mp1xx_hal_smartcard.h" 333 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 334 335 #ifdef HAL_SMBUS_MODULE_ENABLED 336 #include "stm32mp1xx_hal_smbus.h" 337 #endif /* HAL_SMBUS_MODULE_ENABLED */ 338 339 #ifdef HAL_SPDIFRX_MODULE_ENABLED 340 #include "stm32mp1xx_hal_spdifrx.h" 341 #endif /* HAL_SPDIFRX_MODULE_ENABLED */ 342 343 #ifdef HAL_SPI_MODULE_ENABLED 344 #include "stm32mp1xx_hal_spi.h" 345 #endif /* HAL_SPI_MODULE_ENABLED */ 346 347 #ifdef HAL_SRAM_MODULE_ENABLED 348 #include "stm32mp1xx_hal_sram.h" 349 #endif /* HAL_SRAM_MODULE_ENABLED */ 350 351 #ifdef HAL_RTC_MODULE_ENABLED 352 #include "stm32mp1xx_hal_rtc.h" 353 #endif /* HAL_RTC_MODULE_ENABLED */ 354 355 #ifdef HAL_TAMP_MODULE_ENABLED 356 #include "stm32mp1xx_hal_tamp.h" 357 #endif /* HAL_TAMP_MODULE_ENABLED */ 358 359 #ifdef HAL_TIM_MODULE_ENABLED 360 #include "stm32mp1xx_hal_tim.h" 361 #endif /* HAL_TIM_MODULE_ENABLED */ 362 363 #ifdef HAL_UART_MODULE_ENABLED 364 #include "stm32mp1xx_hal_uart.h" 365 #endif /* HAL_UART_MODULE_ENABLED */ 366 367 #ifdef HAL_USART_MODULE_ENABLED 368 #include "stm32mp1xx_hal_usart.h" 369 #endif /* HAL_USART_MODULE_ENABLED */ 370 371 #ifdef HAL_WWDG_MODULE_ENABLED 372 #include "stm32mp1xx_hal_wwdg.h" 373 #endif /* HAL_WWDG_MODULE_ENABLED */ 374 375 /* Exported macro ------------------------------------------------------------*/ 376 #ifdef USE_FULL_ASSERT 377 /** 378 * @brief The assert_param macro is used for function's parameters check. 379 * @param expr: If expr is false, it calls assert_failed function 380 * which reports the name of the source file and the source 381 * line number of the call that failed. 382 * If expr is true, it returns no value. 383 * @retval None 384 */ 385 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 386 /* Exported functions ------------------------------------------------------- */ 387 void assert_failed(uint8_t* file, uint32_t line); 388 #else 389 #define assert_param(expr) ((void)0U) 390 #endif /* USE_FULL_ASSERT */ 391 392 #ifdef __cplusplus 393 } 394 #endif 395 396 #endif /* STM32MP1xx_HAL_CONF_H */ 397 398 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 399