| /bsp/nuvoton/libraries/ma35/rtt_port/ |
| A D | drv_sys_i2c0.c | 36 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_SI; in I2C0_MasterRx()
42 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_SI; in I2C0_MasterRx()
58 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_SI; in I2C0_MasterRx()
63 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_SI; in I2C0_MasterRx()
69 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | (I2C_CTL_STO | I2C_CTL_SI); in I2C0_MasterRx()
84 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_SI; in I2C0_MasterTx()
90 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_SI; in I2C0_MasterTx()
103 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_SI; in I2C0_MasterTx()
136 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_STA; in ma35d1_write_i2c_data()
177 I2C0->CTL0 = (I2C0->CTL0 & ~0x3c) | I2C_CTL_STA; in ma35d1_read_i2c_data()
[all …]
|
| /bsp/hc32l136/Libraries/HC32L136_StdPeriph_Driver/src/ |
| A D | i2c.c | 80 if(I2C0 == enCh) in I2C_SetBaud()
104 if(I2C0 == enCh) in I2C_SetFunc()
172 if(I2C0 == enCh) in I2C_ClearFunc()
239 if(I2C0 == enCh) in I2C_GetIrq()
262 if(I2C0 == enCh) in I2C_ClearIrq()
285 if(I2C0 == enCh) in I2C_GetState()
307 if(I2C0 == enCh) in I2C_WriteSlaveAddr()
333 if(I2C0 == enCh) in I2C_WriteByte()
356 if(I2C0 == enCh) in I2C_ReadByte()
628 if(I2C0 == enCh) in I2C_DeInit()
[all …]
|
| /bsp/gd32/arm/gd32e230-lckfb/ |
| A D | README.md | 26 - 2 x I2C (I2C0, I2C1)
39 | I2C | 支持 | I2C0, I2C1 硬件I2C |
46 - **I2C0**: SCL(PB6), SDA(PB7)
|
| /bsp/nv32f100x/lib/src/ |
| A D | i2c.c | 69 if(pI2Cx == I2C0) in I2C_Init()
126 if(pI2Cx == I2C0) in I2C_Init()
241 while( (!I2C_IsBusy(I2C0) ) && ( u32ETMeout < I2C_WAIT_STATUS_ETMEOUT)) in I2C_RepeatStart()
287 if(pI2Cx == I2C0) in I2C_IntDisable()
315 if(pI2Cx == I2C0) in I2C_IntEnable()
364 if(pI2Cx == I2C0) in I2C_Deinit()
|
| /bsp/synwit/libraries/SWM320_CSL/SWM320_StdPeriph_Driver/ |
| A D | SWM320_i2c.c | 36 case ((uint32_t)I2C0): in I2C_Init()
57 case ((uint32_t)I2C0): in I2C_Init()
101 case ((uint32_t)I2C0): in I2C_Init()
|
| /bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/ |
| A D | SWM341_i2c.c | 37 case ((uint32_t)I2C0): in I2C_Init()
62 case ((uint32_t)I2C0): in I2C_Init()
107 case ((uint32_t)I2C0): in I2C_Init()
|
| /bsp/gd32/arm/gd32e230-lckfb/board/ |
| A D | Kconfig | 150 bool "Enable I2C0"
154 int "I2C0 Clock Speed (Hz)"
159 Set the I2C0 clock speed in Hz.
180 bool "Enable I2C0 BUS (software simulation)"
191 int "I2C0 sda pin number"
|
| /bsp/Infineon/psoc6-evaluationkit-062S2/applications/arduino_pinout/ |
| A D | README.md | 37 | 14 (D14) | BSP_IO_PORT_08_PIN_01 | 否 | I2C0-SDA,默认被RT-Thread的I2C设备框架i2c0接管 |
38 | 15 (D15) | BSP_IO_PORT_08_PIN_00 | 否 | I2C0-SCL,默认被RT-Thread的I2C设备框架i2c0接管 |
|
| /bsp/efm32/Libraries/emlib/src/ |
| A D | em_i2c.c | 58 #define I2C_REF_VALID(ref) ((ref) == I2C0)
62 #define I2C_REF_VALID(ref) ((ref == I2C0) || (ref == I2C1))
374 if (i2c == I2C0) in I2C_Transfer()
733 if (i2c == I2C0) in I2C_TransferInit()
|
| /bsp/efm32/ |
| A D | hdl_interrupt.c | 786 if ((I2C0->IF & I2C_IF_ADDR) || \ in I2C0_IRQHandler()
787 (I2C0->IF & I2C_IF_RXDATAV) || \ in I2C0_IRQHandler()
788 (I2C0->IF & I2C_IF_SSTOP)) in I2C0_IRQHandler()
797 I2C_IntClear(I2C0, I2C_IFC_ADDR | I2C_IFC_SSTOP); in I2C0_IRQHandler()
|
| /bsp/samd21/sam_d2x_asflib/sam0/drivers/i2c/ |
| A D | i2c_slave.c | 153 if (module->hw == I2C0) in i2c_slave_init()
171 if (module->hw == I2C0) { in i2c_slave_init()
|
| A D | i2c_slave_interrupt.c | 284 if (module->hw == I2C0) { in _i2c_slave_rx_isr_handler()
325 if (module->hw == I2C0) { in _i2c_slave_tx_isr_handler()
|
| A D | i2c_master_interrupt.c | 449 if (module->hw == I2C0) { in _i2c_master_isr_handler()
455 if (module->hw == I2C0) { in _i2c_master_isr_handler()
|
| /bsp/raspberry-pico/RP2040/applications/arduino_pinout/ |
| A D | README.md | 28 | 4 (D4) | P | 是/否 | I2C0-SDA，默认被RT-Thread的I2C设备框架i2c0接管 |
29 | 5 (D5) | P | 是/否 | I2C0-SCL，默认被RT-Thread的I2C设备框架i2c0接管 |
|
| /bsp/ht32/libraries/HT32_STD_1xxxx_FWLib/library/HT32F1xxxx_Driver/inc/ |
| A D | ht32f1xxxx_rstcu.h | 129 unsigned long I2C0 :1; // Bit 0 member
|
| /bsp/synwit/swm320-mini/board/ |
| A D | Kconfig | 135 bool "Enable I2C0"
140 int "I2C0 scl pin number"
144 int "I2C0 sda pin number"
|
| /bsp/ht32/libraries/HT32_STD_5xxxx_FWLib/library/HT32F5xxxx_Driver/inc/ |
| A D | ht32f5xxxx_rstcu.h | 117 unsigned long I2C0 :1; // Bit 0 member
|
| /bsp/hpmicro/hpm5301evklite/board/ |
| A D | Kconfig | 124 bool "Enable I2C0"
128 bool "Enable I2C0 DMA"
|
| /bsp/Vango/v85xx/ |
| A D | README.md | 57 | IIC | 未支持 | I2C0 |
|
| /bsp/nuvoton/libraries/n9h30/rtt_port/ |
| A D | Kconfig | 274 bool "Enable I2C0"
421 bool "Enable SOFT I2C0"
428 hex "Specify the pin index of SCL of SOFT I2C0"
433 hex "Specify the pin index of SDA of SOFT I2C0"
|
| /bsp/Vango/v85xxp/ |
| A D | README.md | 57 | IIC | 未支持 | I2C0 |
|
| /bsp/microchip/samd51-adafruit-metro-m4/board/ |
| A D | Kconfig | 43 bool "Enable I2C0"
|
| /bsp/microchip/samd51-seeed-wio-terminal/board/ |
| A D | Kconfig | 43 bool "Enable I2C0"
|
| /bsp/microchip/samc21/board/ |
| A D | Kconfig | 37 bool "Enable I2C0"
|
| /bsp/hc32l136/Libraries/HC32L136_StdPeriph_Driver/inc/ |
| A D | i2c.h | 79 I2C0 = 0,///<通道0 enumerator
|