| /bsp/nuvoton/numaker-m032ki/board/NuPinConfig/ |
| A D | nutool_pincfg.cfg | 55 Pin41:PE.8
56 Pin42:PE.9
57 Pin43:PE.10
58 Pin44:PE.11
59 Pin45:PE.12
60 Pin46:PE.13
76 Pin62:PE.14
77 Pin63:PE.15
111 Pin97:PE.7
112 Pin98:PE.6
[all …]
|
| /bsp/nuvoton/numaker-m2354/board/NuPinConfig/ |
| A D | nutool_pincfg.cfg | 52 Pin41:PE.8
53 Pin42:PE.9
54 Pin43:PE.10
55 Pin44:PE.11
56 Pin45:PE.12
57 Pin46:PE.13
73 Pin62:PE.14
74 Pin63:PE.15
110 Pin99:PE.5
111 Pin100:PE.4
[all …]
|
| /bsp/nuvoton/numaker-iot-m487/board/NuPinConfig/ |
| A D | nutool_pincfg.cfg | 65 Pin54:PE.13
122 Pin111:PE.5
123 Pin112:PE.4
128 Pin117:PE.1
129 Pin118:PE.0
|
| /bsp/nuvoton/numaker-iot-m467/board/NuPinConfig/ |
| A D | nutool_pincfg.cfg | 74 Pin60:PE.13
96 Pin82:PE.14
97 Pin83:PE.15
157 Pin143:PE.1
158 Pin144:PE.0
|
| /bsp/nuvoton/numaker-iot-ma35d1/board/nutool_pincfg/ |
| A D | nutool_pincfg.c | 223 GPIO_SetPowerMode(PE, 0x3FFF, 0); in nutool_pincfg_init_rgmii0()
225 GPIO_SetPullCtl(PE, 0x3FFF, GPIO_PUSEL_DISABLE); in nutool_pincfg_init_rgmii0()
227 GPIO_SetSchmittTriggere(PE, 0x3FDF, 1); //except clk in nutool_pincfg_init_rgmii0()
229 GPIO_SetSlewCtl(PE, 0x3FFF, GPIO_SLEWCTL_NORMAL); in nutool_pincfg_init_rgmii0()
231 GPIO_SetDrivingCtl(PE, 0x3FFF, 1); in nutool_pincfg_init_rgmii0()
|
| /bsp/nv32f100x/lib/src/ |
| A D | kbi.c | 133 pKBI->PE |= (1<<i); /* enable this KBI pin */ in KBI_Init()
235 pKBI->PE = 0; in KBI_DeInit()
|
| /bsp/nv32f100x/lib/inc/ |
| A D | kbi.h | 257 pKBI->PE |= (PinMasks); in KBI_Enable()
280 pKBI->PE &= ~(PinMasks); in KBI_Disable()
|
| /bsp/nuvoton/numaker-hmi-ma35d1/board/nutool_pincfg/ |
| A D | nutool_pincfg.c | 301 GPIO_SetPowerMode(PE, 0x3FFF, 0); in nutool_pincfg_init_rgmii0()
303 GPIO_SetPullCtl(PE, 0x3FFF, GPIO_PUSEL_DISABLE); in nutool_pincfg_init_rgmii0()
305 GPIO_SetSchmittTriggere(PE, 0x3FDF, 1); //except clk in nutool_pincfg_init_rgmii0()
307 GPIO_SetSlewCtl(PE, 0x3FFF, GPIO_SLEWCTL_NORMAL); in nutool_pincfg_init_rgmii0()
309 GPIO_SetDrivingCtl(PE, 0x3FFF, 1); in nutool_pincfg_init_rgmii0()
|
| /bsp/ht32/libraries/HT32_STD_1xxxx_FWLib/library/HT32F1xxxx_Driver/inc/ |
| A D | ht32f1xxxx_rstcu.h | 90 unsigned long PE :1; // Bit 12 member
|
| /bsp/ht32/libraries/HT32_STD_5xxxx_FWLib/library/HT32F5xxxx_Driver/inc/ |
| A D | ht32f5xxxx_rstcu.h | 85 unsigned long PE :1; // Bit 12 member
|
| /bsp/x86/drivers/include/ |
| A D | bsp.h | 133 #define PE 0x04 /* Parity Error */ macro
|
| /bsp/nuvoton/libraries/m031/rtt_port/ |
| A D | drv_gpio.c | 385 int_status = PE->INTSRC; in GPCDEF_IRQHandler()
389 PE->INTSRC = int_status; in GPCDEF_IRQHandler()
|
| /bsp/bluetrum/ab32vg1-ab-prougen/ |
| A D | README.md | 70 | GPIO | 支持 | PA PB PE PF |
|
| /bsp/nuvoton/libraries/m460/rtt_port/ |
| A D | drv_gpio.c | 378 int_status = PE->INTSRC; in GPE_IRQHandler()
380 PE->INTSRC = int_status; in GPE_IRQHandler()
|
| /bsp/nuvoton/libraries/m480/rtt_port/ |
| A D | drv_gpio.c | 378 int_status = PE->INTSRC; in GPE_IRQHandler()
380 PE->INTSRC = int_status; in GPE_IRQHandler()
|
| /bsp/nuvoton/libraries/m2354/rtt_port/ |
| A D | drv_gpio.c | 378 int_status = PE->INTSRC; in GPE_IRQHandler()
380 PE->INTSRC = int_status; in GPE_IRQHandler()
|
| /bsp/ti/c28x/libraries/tms320f28379d/headers/include/ |
| A D | F2837xD_sci.h | 122 Uint16 PE:1; // 2 Parity error flag member
|
| /bsp/nuvoton/numaker-m467hj/board/NuPinConfig/ |
| A D | nutool_pincfg.c | 252 GPIO_SetSlewCtl(PE, (BIT14 | BIT15), GPIO_SLEWCTL_FAST); in nutool_pincfg_init_ebi()
253 GPIO_SetSlewCtl(PE, (BIT0 | BIT1), GPIO_SLEWCTL_FAST); in nutool_pincfg_init_ebi()
|
| /bsp/fujitsu/mb9x/mb9bf506r/drivers/ |
| A D | fm3_uart.c | 276 FM3_GPIO->PFR0_f.PE = 1; in uart_pin_setup()
290 FM3_GPIO->PFR1_f.PE = 1; in uart_pin_setup()
370 FM3_GPIO->PFR4_f.PE = 1; in uart_pin_setup()
|
| /bsp/nuvoton/numaker-pfm-m487/board/NuPinConfig/ |
| A D | nutool_pincfg.cfg | 65 Pin54:PE.13
|
| /bsp/CME_M7/StdPeriph_Driver/src/ |
| A D | cmem7_usb.c | 33 hprt.HPRT_b.POC = hprt.HPRT_b.PEDC = hprt.HPRT_b.PE = hprt.HPRT_b.PCD = 0; in USB_SET_REG_HPRT()
252 hprt.HPRT_b.PE = 1; in USB_hostPortDisable()
255 return USB->__HPRT_b.PE ? FALSE : TRUE; in USB_hostPortDisable()
|
| /bsp/hc32l136/Libraries/HC32L136_StdPeriph_Driver/src/ |
| A D | uart.c | 645 bStatus = (pstcData->pstcInstance->ISR_f.PE == 1) ? TRUE : FALSE; in Uart_GetStatus()
787 if(1 == pstcData->pstcInstance->ISR_f.PE) in Uart_IRQHandler()
|
| A D | lpuart.c | 711 bStatus = (pstcData->pstcInstance->ISR_f.PE == 1) ? TRUE : FALSE; in LPUart_GetStatus()
839 if(1 == pstcData->pstcInstance->ISR_f.PE) in LpUart_IRQHandler()
|
| /bsp/simulator/ |
| A D | mingw.ld | 168 section VMA at 0, the PE format will not allow it. */
|
| /bsp/CME_M7/StdPeriph_Driver/inc/ |
| A D | cmem7_usb.h | 136 …__IO uint32_t PE : 1; /*!< Port Enable … member
|