| /bsp/phytium/board/ |
| A D | board.kconfig | 10 prompt "Use E2000D demo board"
13 select E2000D demo board config
24 prompt "Use E2000Q demo board"
27 select E2000Q demo board config
38 prompt "Use firefly board"
41 select firefly board config
52 prompt "Use PD2408 test a board"
55 select PD2408 test a board config
65 prompt "Use PD2408 test b board"
68 select PD2408 test b board config
[all …]
|
| /bsp/allwinner/libraries/sunxi-hal/hal/source/disp2/soc/ |
| A D | Kconfig | 6 bool "board v459 perf1"
9 board v459 perf1
12 bool "board fpga f133"
15 board f133 fpga
21 board, disp with VVX07H005A10_mipi
23 bool "board, disp with TFT08006_mipi"
26 board, disp with TFT08006_mipi
29 bool "board, disp with TFT RGB"
32 board, disp with TFT RGB
40 bool "board, disp with lvds"
[all …]
|
| /bsp/wch/arm/ |
| A D | ch32f10x_port_cn.md | 109 + ch32f103c8-core\board
110 + ch32f103c8-core\board\linker_scripts
111 + ch32f103c8-core\board\linker_scripts\link.sct
112 + ch32f103c8-core\board\board.c
113 + ch32f103c8-core\board\board.h
114 + ch32f103c8-core\board\ch32f10x_conf.h
115 + ch32f103c8-core\board\system_ch32f10x.c
116 + ch32f103c8-core\board\Kconfig
117 + ch32f103c8-core\board\SConscript
127 ### 2.2 编写board/Kconfig
[all …]
|
| /bsp/stm32/stm32h7s7-st-disco/ |
| A D | README_en.md | 14 - Advanced Usage for harnessing the board's full capabilities.
22 Take a look at the development board's sleek design:
24 
70 …ST-Link port of the development board to the PC using a data cable and ensure that the power suppl…
85 [I/board] System Clock information
86 [I/board] SYSCLK_Frequency = 550000000
87 [I/board] HCLK_Frequency = 275000000
88 [I/board] PCLK1_Frequency = 137500000
89 [I/board] PCLK2_Frequency = 137500000
90 [I/board] XSPI1_Frequency = 200000000
[all …]
|
| /bsp/stm32/stm32mp157a-st-discovery/ |
| A D | README.md | 7 …nstruction of the BSP (board support package) provided by the RT-Thread development team for the S…
17 … board. More advanced features will be introduced in the Advanced Features section to help develop…
23 
25 The mainly-used **on-board resources** are shown as follows:
34 For more details about this board, please refer to the ST official documentation: [STM32MP157A-DK1 …
40 | On-board Peripheral | **Support** | **Remark** |
68 Use a USB cable to connect the development board to the PC and turn on the power switch.
72 …click the project.eww file, to open the IAR project, compile and download the program to the board.
74 … program, when the ST_LINK connects the board, clicking the download button can download the progr…
80 …onnect the serial port of the board to PC, communicate with it via a serial terminal tool (115200-…
[all …]
|
| /bsp/stm32/stm32h747-st-discovery/ |
| A D | README.md | 7 …uction of the BSP (board support package) provided by the RT-Thread development team for the STM32…
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
19 …OVERY is a development board that contains a ARM Cortex-M7. The maximum main frequency is 480 MHz,…
23 …board](https://github.com/RT-Thread/rt-thread/raw/master/bsp/stm32/stm32h747-st-discovery/figures/…
25 The mainly-used resources of this board are shown as follows:
33 For more details about this board, please refer to the ST official documentation [STM32H747I-DISCO]…
39 | **On-board Peripheral** | **Support** | **Remark** |
54 Use a USB cable to connect the development board to the PC and turn on the power switch.
58 …to download V 5.29 and above to support ST-LINK V3), compile and download the project to the board.
60 … program, when the ST_LINK connects the board, clicking the download button can download the progr…
[all …]
|
| /bsp/nxp/mcx/mcxc/frdm-mcxc444/ |
| A D | README_EN.md | 4 … evaluation board based on the MCX C444 MCU. It is designed for rapid prototyping and features a c…
12 The appearance of the board is shown in the figure below:
14 
16 The common on-board resources for this board are listed below:
24 To run sample programs on the FRDM-MCXC444 board, you need to make the following preparations:
36 Use a USB cable to connect the USB port of the development board to your PC.
58 4. Click the download button to flash the firmware to the development board.
70 …ically, press the reset button to restart the board and observe the actual effect of the LEDs on t…
74 …ng the program, it should start running automatically. If not, press the reset button on the board.
76 Connect the board's serial port to your PC and open a serial terminal with the following settings:
[all …]
|
| /bsp/nxp/imx/imxrt/imxrt1052-nxp-evk/ |
| A D | README.md | 7 …ruction of the BSP (board support package) provided by the RT-Thread development team for the NXP …
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
19 …050 EVK is a development board based on ARM Cortex-M7. The maximum main frequency is 600 MHz, and…
21 …board](https://github.com/RT-Thread/rt-thread/raw/master/bsp/imxrt/imxrt1052-nxp-evk/figures/board…
23 The mainly-used resources of this board are shown as follows:
31 - Debug interface: Standard JTAG/SWD. For more details about this board, please refer to [nxp.com](…
56 Use a USB cable to connect the development board to the PC and turn on the power switch.
60 …the project.uvprojx file, to open the MDK 5 project, compile and download the project to the board.
62 …rogram, when the CMSIS-DAP connects the board, clicking the download button can download the progr…
66 …cessfully downloaded, the system runs automatically. The green LED on the board will flash periodi…
[all …]
|
| /bsp/stm32/stm32f091-st-nucleo/ |
| A D | README.md | 7 …truction of the BSP (board support package) provided by the RT-Thread development team for the STM…
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
21 …ucleo is a development board that contains a ARM Cortex-M0. The maximum main frequency is 48 MHz, …
23 [](https://github.com/RT-Thread/rt-thread/blob/master/bsp/stm32/stm32f09…
25 The mainly-used resources of this board are shown as follows:
34 ### For more details about this board, please refer to [ST official](https://www.st.com/en/evaluati…
42 | **On-board Peripherals** | **Support** | **Remark** …
73 Use a USB cable to connect the development board to the PC and turn on the power switch.
77 … the project.uvprojx file, to open the MDK5 project, compile and download the project to the board.
79 > By default, the executable file will be downloaded to the board by the simulator, which is connec…
[all …]
|
| /bsp/nxp/mcx/mcxn/frdm-mcxn947/ |
| A D | README_EN.md | 4 …board based on the MCXN947 device, which integrates dual Arm Cortex-M33 microcontrollers and a Neu…
6 The appearance of the board is shown in the figure below:
8 
10 The common on-board resources for this board are listed below:
14 …t board, please refer to [NXP official website](https://www.nxp.com/design/design-center/developme…
18 Currently, the FRDM-MCXN947 board-level support package provides MDK5 and supports GCC development …
32 3. Use the USB cable to connect the USB to serial port of the development board to the PC.
51 …it, click the download button to download the firmware to the development board. Then, the program…
53 …d the program. And then click the Download button to download the program to the development board.
59 …ically, press the reset button to restart the board and observe the actual effect of the LEDs on t…
[all …]
|
| /bsp/stm32/stm32f407-rt-spark/ |
| A D | README_EN.md | 13 …on the board. In the Advanced Usage Section, more advanced features will be introduced to help dev…
17 …development board based on the ARM Cortex-M4 core from RT-THREAD, with a maximum main frequency of…
19 The appearance of the board is shown in the figure below:
21 
23 The development board commonly used **on-board resources** as follows:
33 …board, please refer to the official document [Introduction to STM32 Spark-1 Development Board](htt…
57 …low the simple steps to get the RT-Thread operating system running on the board and see the result…
61 … more of the board's resources with the RT-Thread operating system. By using the ENV tool to confi…
77 Connect the board to the PC with a cable and turn on the power switch.
81 …t.uvprojx file to open the MDK5 project, compile and download the program to the development board.
[all …]
|
| /bsp/wch/risc-v/yd-ch32v307vct6/ |
| A D | README.md | 7 …ion instruction of the BSP (board support package) provided by the RT-Thread community for the CH3…
15 … Started section developers can quickly get their hands on this BSP and run RT-Thread on the board.
17 
33 For more details about this board, please refer to:
58 5. Configure RT-Thread and hardware board: scons --menuconfig
69 4. Check board connection:
78 5. Download firmware to board:
85 1. Connect USB-UART converter to board:
86 - board pin A9 (UART1_TX) -> converter RX
87 - board pin A10 (UART1_RX) -> converter TX (optional, for enter commands)
[all …]
|
| /bsp/nxp/imx/imxrt/imxrt1021-nxp-evk/ |
| A D | README.md | 7 …ruction of the BSP (board support package) provided by the RT-Thread development team for the NXP …
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
20 
28 | **On-board Peripherals** | **Support** | **Remark** |
56 Use a USB cable to connect the development board to the PC and turn on the power switch.
60 …click the project.eww file, to open the IAR project, compile and download the project to the board.
62 …rogram, when the CMSIS-DAP connects the board, clicking the download button can download the progr…
66 …cessfully downloaded, the system runs automatically. The green LED on the board will flash periodi…
68 …nnect the serial port of the board to the PC, communicate with it via a serial terminal tool(11520…
|
| /bsp/stm32/stm32l4r9-st-sensortile-box/board/CubeMX_Config/ |
| A D | .mxproject | 13 HeaderFiles#1=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config…
15 HeaderFiles#3=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config…
21 HeaderFiles#9=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config…
35 HeaderPath#0=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/…
36 HeaderPath#1=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/…
37 HeaderPath#2=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/…
38 HeaderPath#3=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/…
64 SourcePath#0=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/…
65 SourcePath#1=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/…
66 SourcePath#2=F:/04_git_repo/GITEE/rt-thread_github/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/…
[all …]
|
| /bsp/stm32/stm32mp157a-st-ev1/ |
| A D | README.md | 7 …nstruction of the BSP (board support package) provided by the RT-Thread development team for the S…
17 … board. More advanced features will be introduced in the Advanced Features section to help develop…
23 
25 The mainly-used **on-board resources** are shown as follows:
34 For more details about this board, please refer to the ST official documentation:
42 | On-board Peripheral | **Support** | **Remark** |
84 Use a USB cable to connect the development board to the PC and turn on the power switch.
88 … the project.uvprojx file, to open the MDK5 project, compile and download the program to the board.
90 … program, when the ST_LINK connects the board, clicking the download button can download the progr…
96 …onnect the serial port of the board to PC, communicate with it via a serial terminal tool (115200-…
[all …]
|
| /bsp/stm32/stm32h503-st-nucleo/ |
| A D | README.md | 7 …truction of the BSP (board support package) provided by the RT-Thread development team for the NUC…
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
19 …board introduced by ST, based on the ARM Cortex-M33 core. It operates at a maximum frequency of 25…
21 The appearance of the development board is as shown in the following picture.
23 
25 The mainly-used **on-board resources** are shown as follows:
38 …- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual C…
42 #### For more details about this board, please refer to the [ST official documentation](https://www…
84 Connect the development board to the PC using a Type-C data cable.
88 …he `project.uvprojx` file, to open the MDK5 project, compile and download the program to the board.
[all …]
|
| /bsp/stm32/stm32h563-st-nucleo/ |
| A D | README.md | 7 …ruction of the BSP (board support package) provided by the RT-Thread development team for the NUCL…
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
21 The appearance of the development board is as shown in the following picture.
23 
25 The mainly-used **on-board resources** are shown as follows:
38 …- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual C…
42 #### For more details about this board, please refer to the [ST official documentation](https://www…
86 Connect the development board to the PC using a Type-C data cable.
90 …he `project.uvprojx` file, to open the MDK5 project, compile and download the program to the board.
92 … program, when the ST_LINK connects the board, clicking the download button can download the progr…
[all …]
|
| /bsp/Infineon/xmc7100d-f144k4160aa/libs/TARGET_APP_KIT_XMC71_EVK_LITE_V2/ |
| A D | RELEASE.md | 2 …board is based on the XMC7100 family of devices. XMC7100 MCU is designed for industrial applicati…
5 …board support package for the XMC7100 Lite Evaluation board with XMC7100D-F100K4160 MCU. Replace …
7 …for each BSP in the family so not all version numbers will exist for each board. Additionally, new…
11 * BSP specific makefile to configure the build process for the board
12 * cybsp.c/h files to initialize the board and any system peripherals
13 * cybsp_types.h file describing basic board setup
15 * Configurator design files (and generated code) to setup board specific peripherals
38 Issue: Wifi companion radio connection may fail when the board is programmed using `make program`
40 Workaround: Program the board using an IDE launch config.
|
| /bsp/stm32/stm32f401-st-nucleo/ |
| A D | README.md | 7 …truction of the BSP (board support package) provided by the RT-Thread development team for the STM…
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
19 …evelopment board based on STM32F401RE, which contains a Cortex-M4 core. The maximum main frequency…
21 
23 The mainly-used **on-board resources** are shown as follows:
34 #### For more details about this board, please refer to the [ST official documentation](https://www…
64 Use a Type-A to Mini-B cable to connect the development board to the PC and turn on the power switc…
68 …he `project.uvprojx` file, to open the MDK5 project, compile and download the program to the board.
70 … program, when the ST_LINK connects the board, clicking the download button can download the progr…
74 … automatically. Observe the running results of the LED on the development board, the red LD3 and L…
|
| /bsp/nxp/imx/imxrt/imxrt1170-nxp-evk/ |
| A D | README.md | 7 …ruction of the BSP (board support package) provided by the RT-Thread development team for the NXP …
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
21 
29 | **On-board Peripherals** | **Support** | **Remark** |
57 Use a USB cable to connect the development board to the PC and turn on the power switch.
61 …click the project.eww file, to open the IAR project, compile and download the project to the board.
63 …rogram, when the CMSIS-DAP connects the board, clicking the download button can download the progr…
69 …nnect the serial port of the board to the PC, communicate with it via a serial terminal tool(11520…
|
| /bsp/hpmicro/hpm6750evk2/ |
| A D | README.md | 7 …cument provide brief introduction of the BSP (board support package) for the HPM6750EVK2 developme…
15 … board. More advanced features will be introduced in the Advanced Features section to help develop…
19 HPM6750EVK2 is a development board based on the RISC-V core launched by HPMicro, with rich on-board…
20 
28 | **On-board Peripherals** | **Support** | **Note** |
70 - Connect the Off-board debugger to 10-PIN JTAG port
101 Once the project is successfully downloaded, the system runs automatically. The LED on the board wi…
103 …nnect the serial port of the board to the PC, communicate with it via a serial terminal tool(11520…
|
| /bsp/stm32/stm32f469-st-disco/ |
| A D | README.md | 5 …uction of the BSP (board support package) that provided by the RT-Thread development team for the …
13 … board. More advanced features will be introduced in the Advanced Features section to help develop…
19 …board](https://github.com/RT-Thread/rt-thread/raw/master/bsp/stm32/stm32f469-st-disco/figures/boar…
34 More info about this board, please check [ST Official](https://www.st.com/en/evaluation-tools/32f46…
40 | **On-board Peripherals** | **Support** | Remark …
72 Use a cable to connect the development board to the PC and turn on the power switch.
76 ….uvprojx` file to open the MDK5 project, compile and download the program to the development board.
78 …nnecting the development board via st-link, click the Download button can directly download the pr…
84 Connect the corresponding serial port of the development board to the PC, and when the correspondin…
|
| /bsp/nxp/lpc/lpc55sxx/lpc55s06_nxp_evk/board/ |
| A D | SConscript | 7 board.c
8 MCUX_Config/board/clock_config.c
9 MCUX_Config/board/pin_mux.c
12 CPPPATH = [cwd,cwd + '/MCUX_Config/board']
|
| /bsp/nxp/lpc/lpc55sxx/lpc55s36_nxp_evk/board/ |
| A D | SConscript | 7 board.c
8 MCUX_Config/board/clock_config.c
9 MCUX_Config/board/pin_mux.c
12 CPPPATH = [cwd,cwd + '/MCUX_Config/board']
|
| /bsp/nxp/lpc/lpc55sxx/Libraries/template/lpc55s6xxxx/board/ |
| A D | SConscript | 7 board.c
8 MCUX_Config/board/clock_config.c
9 MCUX_Config/board/pin_mux.c
12 CPPPATH = [cwd,cwd + '/MCUX_Config/board']
|