| /bsp/stm32/stm32h743-atk-apollo/board/ports/ |
| A D | drv_qspi_flash.c | 25 char instruction = 0x35, status; in w25qxx_read_status_register2() local
27 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in w25qxx_read_status_register2()
35 char instruction = 0x06; in w25qxx_write_enable() local
37 rt_qspi_send(device, &instruction, 1); in w25qxx_write_enable()
44 char instruction = 0x38; in w25qxx_enter_qspi_mode() local
57 rt_qspi_send(device, &instruction, 1); in w25qxx_enter_qspi_mode()
|
| /bsp/stm32/stm32f746-st-disco/board/ports/ |
| A D | drv_qspi_flash.c | 25 char instruction = 0x35, status; in n25qxx_read_status_register2() local
27 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in n25qxx_read_status_register2()
35 char instruction = 0x06; in n25qxx_write_enable() local
37 rt_qspi_send(device, &instruction, 1); in n25qxx_write_enable()
44 char instruction = 0x38; in n25qxx_enter_qspi_mode() local
57 rt_qspi_send(device, &instruction, 1); in n25qxx_enter_qspi_mode()
|
| /bsp/stm32/stm32f767-atk-apollo/board/ports/ |
| A D | drv_qspi_flash.c | 25 char instruction = 0x35, status; in w25qxx_read_status_register2() local
27 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in w25qxx_read_status_register2()
35 char instruction = 0x06; in w25qxx_write_enable() local
37 rt_qspi_send(device, &instruction, 1); in w25qxx_write_enable()
44 char instruction = 0x38; in w25qxx_enter_qspi_mode() local
57 rt_qspi_send(device, &instruction, 1); in w25qxx_enter_qspi_mode()
|
| /bsp/stm32/stm32f767-fire-challenger-v1/board/ports/ |
| A D | drv_qspi_flash.c | 25 char instruction = 0x35, status; in w25qxx_read_status_register2() local
27 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in w25qxx_read_status_register2()
35 char instruction = 0x06; in w25qxx_write_enable() local
37 rt_qspi_send(device, &instruction, 1); in w25qxx_write_enable()
44 char instruction = 0x38; in w25qxx_enter_qspi_mode() local
57 rt_qspi_send(device, &instruction, 1); in w25qxx_enter_qspi_mode()
|
| /bsp/stm32/stm32f469-st-disco/board/ports/ |
| A D | drv_qspi_flash.c | 26 char instruction = 0x35, status; in n25qxxa_read_status_register2() local
28 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in n25qxxa_read_status_register2()
36 char instruction = 0x06; in n25qxxa_write_enable() local
38 rt_qspi_send(device, &instruction, 1); in n25qxxa_write_enable()
45 char instruction = 0x38; in n25qxxa_enter_qspi_mode() local
58 rt_qspi_send(device, &instruction, 1); in n25qxxa_enter_qspi_mode()
|
| /bsp/stm32/stm32h750-artpi/board/port/ |
| A D | drv_qspi_flash.c | 21 char instruction = 0x35, status; in w25qxx_read_status_register2() local
23 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in w25qxx_read_status_register2()
31 char instruction = 0x06; in w25qxx_write_enable() local
33 rt_qspi_send(device, &instruction, 1); in w25qxx_write_enable()
40 char instruction = 0x38; in w25qxx_enter_qspi_mode() local
53 rt_qspi_send(device, &instruction, 1); in w25qxx_enter_qspi_mode()
|
| /bsp/stm32/stm32h743-openmv-h7plus/board/ports/ |
| A D | drv_qspi_flash.c | 28 char instruction = 0x35, status; in w25qxx_read_status_register2() local
30 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in w25qxx_read_status_register2()
38 char instruction = 0x06; in w25qxx_write_enable() local
40 rt_qspi_send(device, &instruction, 1); in w25qxx_write_enable()
47 char instruction = 0x38; in w25qxx_enter_qspi_mode() local
60 rt_qspi_send(device, &instruction, 1); in w25qxx_enter_qspi_mode()
|
| /bsp/stm32/stm32l475-atk-pandora/board/ports/ |
| A D | drv_qspi_flash.c | 25 char instruction = 0x35, status; in w25qxx_read_status_register2() local
27 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in w25qxx_read_status_register2()
35 char instruction = 0x06; in w25qxx_write_enable() local
37 rt_qspi_send(device, &instruction, 1); in w25qxx_write_enable()
44 char instruction = 0x38; in w25qxx_enter_qspi_mode() local
57 rt_qspi_send(device, &instruction, 1); in w25qxx_enter_qspi_mode()
|
| /bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/ |
| A D | drv_qspi_flash.c | 120 char instruction = 0x35, status; in w25qxx_read_status_register2() local
122 rt_qspi_send_then_recv(device, &instruction, 1, &status, 1); in w25qxx_read_status_register2()
130 char instruction = 0x06; in w25qxx_write_enable() local
132 rt_qspi_send(device, &instruction, 1); in w25qxx_write_enable()
139 char instruction = 0x38; in w25qxx_enter_qspi_mode() local
152 rt_qspi_send(device, &instruction, 1); in w25qxx_enter_qspi_mode()
|
| /bsp/hc32/libraries/hc32_drivers/ |
| A D | drv_qspi.c | 187 if (message->instruction.qspi_lines > 1) in hc32_qspi_check_direct_comm_param()
212 if ((message->instruction.qspi_lines > 2) && (message->instruction.qspi_lines != 4)) in hc32_qspi_check_direct_comm_param()
258 u8Instr = message->instruction.content; in hc32_qspi_send_cmd()
261 if ((message->instruction.qspi_lines != 1) || in hc32_qspi_send_cmd()
446 hc32_qspi_set_trans_protocol(message->instruction.qspi_lines); in hc32_qspi_write_instr()
450 hc32_qspi_write_direct_comm_value(message->instruction.qspi_lines, u8Instr); in hc32_qspi_write_instr()
611 hc32_qspi_set_trans_protocol(message->instruction.qspi_lines); in hc32_qspi_read_instr()
730 uint8_t u8Instr = message->instruction.content; in hc32_qspi_write()
739 if (message->instruction.qspi_lines != 0) in hc32_qspi_write()
769 uint8_t u8Instr = message->instruction.content; in hc32_qspi_read()
[all …]
|
| /bsp/stm32/libraries/HAL_Drivers/drivers/ |
| A D | drv_qspi.c | 130 Cmdhandler.Instruction = message->instruction.content; in qspi_send_cmd()
133 if (message->instruction.qspi_lines == 0) in qspi_send_cmd()
137 else if (message->instruction.qspi_lines == 1) in qspi_send_cmd()
141 else if (message->instruction.qspi_lines == 2) in qspi_send_cmd()
145 else if (message->instruction.qspi_lines == 4) in qspi_send_cmd()
|
| /bsp/asm9260t/IAR_ASM9260T_DeviceSupportFile/arm/config/devices/AlphaScale/ |
| A D | ASM9260T.i79 | 11 //Does the chip support the thumb instruction set? (true(default), false)
14 //Does the chip support the arm instruction set? (true(default), false)
|
| /bsp/phytium/libraries/drivers_example/ |
| A D | qspi_sample.c | 42 qspi_write_message.instruction.content = 0x02 ;/*write cmd*/ in qspi_sample()
48 qspi_read_message.instruction.content = 0x03 ;/*write cmd*/ in qspi_sample()
|
| /bsp/nuvoton/libraries/m2354/rtt_port/ |
| A D | drv_qspi.c | 248 if (qspi_message->instruction.content != 0) in nu_qspi_bus_xfer()
250 …e_config(qspi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, qspi_message->instr… in nu_qspi_bus_xfer()
252 (rt_uint8_t *) &qspi_message->instruction.content, in nu_qspi_bus_xfer()
|
| /bsp/nuvoton/libraries/m031/rtt_port/ |
| A D | drv_qspi.c | 248 if (qspi_message->instruction.content != 0) in nu_qspi_bus_xfer()
250 …e_config(qspi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, qspi_message->instr… in nu_qspi_bus_xfer()
252 (rt_uint8_t *) &qspi_message->instruction.content, in nu_qspi_bus_xfer()
|
| /bsp/nuvoton/libraries/nuc980/rtt_port/ |
| A D | drv_qspi.c | 235 if (qspi_message->instruction.content != 0) in nu_qspi_bus_xfer()
237 …e_config(qspi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, qspi_message->instr… in nu_qspi_bus_xfer()
239 (rt_uint8_t *) &qspi_message->instruction.content, in nu_qspi_bus_xfer()
|
| /bsp/nuvoton/libraries/m460/rtt_port/ |
| A D | drv_qspi.c | 263 if (qspi_message->instruction.content != 0) in nu_qspi_bus_xfer()
265 …e_config(qspi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, qspi_message->instr… in nu_qspi_bus_xfer()
267 (rt_uint8_t *) &qspi_message->instruction.content, in nu_qspi_bus_xfer()
|
| /bsp/nuvoton/libraries/m480/rtt_port/ |
| A D | drv_qspi.c | 263 if (qspi_message->instruction.content != 0) in nu_qspi_bus_xfer()
265 …e_config(qspi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, qspi_message->instr… in nu_qspi_bus_xfer()
267 (rt_uint8_t *) &qspi_message->instruction.content, in nu_qspi_bus_xfer()
|
| /bsp/nuvoton/libraries/ma35/rtt_port/ |
| A D | drv_qspi.c | 254 if (qspi_message->instruction.content != 0) in nu_qspi_bus_xfer()
256 …e_config(qspi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, qspi_message->instr… in nu_qspi_bus_xfer()
258 (rt_uint8_t *) &qspi_message->instruction.content, in nu_qspi_bus_xfer()
|
| /bsp/m16c62p/drivers/ |
| A D | vectors_gcc.S | 17 .long 0 ;(Undefined Instruction) Interrupt on UND instruction
18 .long 0 ;(Overflow) Interrupt on INTO instruction
|
| /bsp/ESP32_C3/idf_port/ld/ |
| A D | memory.ld | 24 /* CPU instruction prefetch padding size for flash mmap scenario */
26 /* CPU instruction prefetch padding size for memory protection scenario */
44 /* Flash mapped instruction data */
|
| /bsp/hc32/tests/ |
| A D | test_qspi.c | 186 message.instruction.content = ptr[0]; in bsp_qspi_send_then_recv()
187 message.instruction.qspi_lines = 1; in bsp_qspi_send_then_recv()
253 message.instruction.content = ptr[0]; in bsp_qspi_send()
254 message.instruction.qspi_lines = 1; in bsp_qspi_send()
|
| /bsp/nuvoton/nk-980iot/board/ |
| A D | board_dev.c | 72 qspi_message.instruction.content = W25X_REG_WRITESTATUS; in SpiFlash_WriteStatusReg()
73 qspi_message.instruction.qspi_lines = 1; in SpiFlash_WriteStatusReg()
|
| /bsp/nuvoton/nk-rtu980/board/ |
| A D | board_dev.c | 72 qspi_message.instruction.content = W25X_REG_WRITESTATUS; in SpiFlash_WriteStatusReg()
73 qspi_message.instruction.qspi_lines = 1; in SpiFlash_WriteStatusReg()
|
| /bsp/nuvoton/libraries/n9h30/rtt_port/ |
| A D | drv_qspi.c | 387 if (qspi_message->instruction.content != 0) in nu_qspi_bus_xfer()
389 …de_config(spi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, qspi_message->instr… in nu_qspi_bus_xfer()
391 (rt_uint8_t *) &qspi_message->instruction.content, in nu_qspi_bus_xfer()
|