1 /** 2 ************************************************************************** 3 * @file at32f413_conf.h 4 * @version v2.0.4 5 * @date 2022-04-02 6 * @brief at32f413 config header file 7 ************************************************************************** 8 * Copyright notice & Disclaimer 9 * 10 * The software Board Support Package (BSP) that is made available to 11 * download from Artery official website is the copyrighted work of Artery. 12 * Artery authorizes customers to use, copy, and distribute the BSP 13 * software and its related documentation for the purpose of design and 14 * development in conjunction with Artery microcontrollers. Use of the 15 * software is governed by this copyright notice and the following disclaimer. 16 * 17 * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, 18 * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, 19 * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR 20 * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, 21 * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, 22 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. 23 * 24 ************************************************************************** 25 */ 26 27 /* define to prevent recursive inclusion -------------------------------------*/ 28 #ifndef __AT32F413_CONF_H 29 #define __AT32F413_CONF_H 30 31 #ifdef __cplusplus 32 extern "C" { 33 #endif 34 35 /** 36 * @brief in the following line adjust the value of high speed exernal crystal (hext) 37 * used in your application 38 * 39 * tip: to avoid modifying this file each time you need to use different hext, you 40 * can define the hext value in your toolchain compiler preprocessor. 41 * 42 */ 43 #if !defined HEXT_VALUE 44 #define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */ 45 #endif 46 47 /** 48 * @brief in the following line adjust the high speed exernal crystal (hext) startup 49 * timeout value 50 */ 51 #define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */ 52 #define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */ 53 54 /* module define -------------------------------------------------------------*/ 55 #define CRM_MODULE_ENABLED 56 #define TMR_MODULE_ENABLED 57 #define RTC_MODULE_ENABLED 58 #define BPR_MODULE_ENABLED 59 #define GPIO_MODULE_ENABLED 60 #define I2C_MODULE_ENABLED 61 #define USART_MODULE_ENABLED 62 #define PWC_MODULE_ENABLED 63 #define CAN_MODULE_ENABLED 64 #define ADC_MODULE_ENABLED 65 #define SPI_MODULE_ENABLED 66 #define DMA_MODULE_ENABLED 67 #define DEBUG_MODULE_ENABLED 68 #define FLASH_MODULE_ENABLED 69 #define CRC_MODULE_ENABLED 70 #define WWDT_MODULE_ENABLED 71 #define WDT_MODULE_ENABLED 72 #define EXINT_MODULE_ENABLED 73 #define SDIO_MODULE_ENABLED 74 #define USB_MODULE_ENABLED 75 #define ACC_MODULE_ENABLED 76 #define MISC_MODULE_ENABLED 77 78 /* includes ------------------------------------------------------------------*/ 79 #ifdef CRM_MODULE_ENABLED 80 #include "at32f413_crm.h" 81 #endif 82 #ifdef TMR_MODULE_ENABLED 83 #include "at32f413_tmr.h" 84 #endif 85 #ifdef RTC_MODULE_ENABLED 86 #include "at32f413_rtc.h" 87 #endif 88 #ifdef BPR_MODULE_ENABLED 89 #include "at32f413_bpr.h" 90 #endif 91 #ifdef GPIO_MODULE_ENABLED 92 #include "at32f413_gpio.h" 93 #endif 94 #ifdef I2C_MODULE_ENABLED 95 #include "at32f413_i2c.h" 96 #endif 97 #ifdef USART_MODULE_ENABLED 98 #include "at32f413_usart.h" 99 #endif 100 #ifdef PWC_MODULE_ENABLED 101 #include "at32f413_pwc.h" 102 #endif 103 #ifdef CAN_MODULE_ENABLED 104 #include "at32f413_can.h" 105 #endif 106 #ifdef ADC_MODULE_ENABLED 107 #include "at32f413_adc.h" 108 #endif 109 #ifdef SPI_MODULE_ENABLED 110 #include "at32f413_spi.h" 111 #endif 112 #ifdef DMA_MODULE_ENABLED 113 #include "at32f413_dma.h" 114 #endif 115 #ifdef DEBUG_MODULE_ENABLED 116 #include "at32f413_debug.h" 117 #endif 118 #ifdef FLASH_MODULE_ENABLED 119 #include "at32f413_flash.h" 120 #endif 121 #ifdef CRC_MODULE_ENABLED 122 #include "at32f413_crc.h" 123 #endif 124 #ifdef WWDT_MODULE_ENABLED 125 #include "at32f413_wwdt.h" 126 #endif 127 #ifdef WDT_MODULE_ENABLED 128 #include "at32f413_wdt.h" 129 #endif 130 #ifdef EXINT_MODULE_ENABLED 131 #include "at32f413_exint.h" 132 #endif 133 #ifdef SDIO_MODULE_ENABLED 134 #include "at32f413_sdio.h" 135 #endif 136 #ifdef ACC_MODULE_ENABLED 137 #include "at32f413_acc.h" 138 #endif 139 #ifdef MISC_MODULE_ENABLED 140 #include "at32f413_misc.h" 141 #endif 142 #ifdef USB_MODULE_ENABLED 143 #include "at32f413_usb.h" 144 #endif 145 146 /** 147 * @} 148 */ 149 150 /** 151 * @} 152 */ 153 154 #ifdef __cplusplus 155 } 156 #endif 157 158 #endif 159