1 /**
2  * \file
3  *
4  * \brief Common SPI related functionality declaration.
5  *
6  * Copyright (c) 2015-2018 Microchip Technology Inc. and its subsidiaries.
7  *
8  * \asf_license_start
9  *
10  * \page License
11  *
12  * Subject to your compliance with these terms, you may use Microchip
13  * software and any derivatives exclusively with Microchip products.
14  * It is your responsibility to comply with third party license terms applicable
15  * to your use of third party software (including open source software) that
16  * may accompany Microchip software.
17  *
18  * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
19  * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
20  * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
21  * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
22  * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
23  * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
24  * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
25  * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
26  * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
27  * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
28  * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
29  *
30  * \asf_license_stop
31  *
32  */
33 
34 #ifndef _HPL_SPI_ASYNC_H_INCLUDED
35 #define _HPL_SPI_ASYNC_H_INCLUDED
36 
37 #include <hpl_spi.h>
38 #include <hpl_irq.h>
39 
40 /**
41  * \addtogroup hpl_spi HPL SPI
42  *
43  *@{
44  */
45 
46 #ifdef __cplusplus
47 extern "C" {
48 #endif
49 
50 /**
51  *  \brief Callbacks the SPI driver must offer in async mode
52  */
53 //@{
54 /** The callback types */
55 enum _spi_async_dev_cb_type {
56 	/** Callback type for transmit, see \ref _spi_async_dev_cb_xfer_t. */
57 	SPI_DEV_CB_TX,
58 	/** Callback type for receive, see \ref _spi_async_dev_cb_xfer_t. */
59 	SPI_DEV_CB_RX,
60 	/** Callback type for \ref _spi_async_dev_cb_complete_t. */
61 	SPI_DEV_CB_COMPLETE,
62 	/** Callback type for error */
63 	SPI_DEV_CB_ERROR,
64 	/** Number of callbacks. */
65 	SPI_DEV_CB_N
66 };
67 
68 struct _spi_async_dev;
69 
70 /** \brief The prototype for callback on SPI transfer error.
71  *  If status code is zero, it indicates the normal completion, that is,
72  *  SS deactivation.
73  *  If status code belows zero, it indicates complete.
74  */
75 typedef void (*_spi_async_dev_cb_error_t)(struct _spi_async_dev *dev, int32_t status);
76 
77 /** \brief The prototype for callback on SPI transmit/receive event
78  *  For TX, the callback is invoked when transmit is done or ready to start
79  *  transmit.
80  *  For RX, the callback is invoked when receive is done or ready to read data,
81  *  see \ref _spi_async_dev_read_one_t on data reading.
82  *  Without DMA enabled, the callback is invoked on each character event.
83  *  With DMA enabled, the callback is invoked on DMA buffer done.
84  */
85 typedef void (*_spi_async_dev_cb_xfer_t)(struct _spi_async_dev *dev);
86 
87 /**
88  *  \brief The callbacks offered by SPI driver
89  */
90 struct _spi_async_dev_callbacks {
91 	/** TX callback, see \ref _spi_async_dev_cb_xfer_t. */
92 	_spi_async_dev_cb_xfer_t tx;
93 	/** RX callback, see \ref _spi_async_dev_cb_xfer_t. */
94 	_spi_async_dev_cb_xfer_t rx;
95 	/** Complete or complete callback, see \ref _spi_async_dev_cb_complete_t. */
96 	_spi_async_dev_cb_xfer_t complete;
97 	/** Error callback, see \ref */
98 	_spi_async_dev_cb_error_t err;
99 };
100 //@}
101 
102 /**
103  *  \brief SPI async driver
104  */
105 //@{
106 
107 /** SPI driver to support async HAL */
108 struct _spi_async_dev {
109 	/** Pointer to the hardware base or private data for special device. */
110 	void *prvt;
111 	/** Data size, number of bytes for each character */
112 	uint8_t char_size;
113 	/** Dummy byte used in master mode when reading the slave */
114 	uint16_t dummy_byte;
115 
116 	/** \brief Pointer to callback functions, ignored for polling mode
117 	 *  Pointer to the callback functions so that initialize the driver to
118 	 *  handle interrupts.
119 	 */
120 	struct _spi_async_dev_callbacks callbacks;
121 	/** IRQ instance for SPI device. */
122 	struct _irq_descriptor irq;
123 };
124 //@}
125 
126 #ifdef __cplusplus
127 }
128 #endif
129 
130 /**@}*/
131 #endif /* ifndef _HPL_SPI_ASYNC_H_INCLUDED */
132