1 /** 2 ****************************************************************************** 3 * @file stm32l1xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> 9 * 10 * Redistribution and use in source and binary forms, with or without modification, 11 * are permitted provided that the following conditions are met: 12 * 1. Redistributions of source code must retain the above copyright notice, 13 * this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright notice, 15 * this list of conditions and the following disclaimer in the documentation 16 * and/or other materials provided with the distribution. 17 * 3. Neither the name of STMicroelectronics nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 ****************************************************************************** 33 */ 34 35 /* Define to prevent recursive inclusion -------------------------------------*/ 36 #ifndef __STM32L1xx_HAL_CONF_H 37 #define __STM32L1xx_HAL_CONF_H 38 39 #ifdef __cplusplus 40 extern "C" { 41 #endif 42 43 /* Exported types ------------------------------------------------------------*/ 44 /* Exported constants --------------------------------------------------------*/ 45 46 /* ########################## Module Selection ############################## */ 47 /** 48 * @brief This is the list of modules to be used in the HAL driver 49 */ 50 51 #define HAL_MODULE_ENABLED 52 #define HAL_ADC_MODULE_ENABLED 53 /*#define HAL_CRYP_MODULE_ENABLED */ 54 /*#define HAL_COMP_MODULE_ENABLED */ 55 /*#define HAL_CRC_MODULE_ENABLED */ 56 /*#define HAL_CRYP_MODULE_ENABLED */ 57 /*#define HAL_DAC_MODULE_ENABLED */ 58 #define HAL_I2C_MODULE_ENABLED 59 /*#define HAL_I2S_MODULE_ENABLED */ 60 /*#define HAL_IRDA_MODULE_ENABLED */ 61 #define HAL_IWDG_MODULE_ENABLED 62 /*#define HAL_LCD_MODULE_ENABLED */ 63 /*#define HAL_NOR_MODULE_ENABLED */ 64 /*#define HAL_OPAMP_MODULE_ENABLED */ 65 #define HAL_PCD_MODULE_ENABLED 66 #define HAL_RTC_MODULE_ENABLED 67 /*#define HAL_SD_MODULE_ENABLED */ 68 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 69 #define HAL_SPI_MODULE_ENABLED 70 /*#define HAL_SRAM_MODULE_ENABLED */ 71 #define HAL_TIM_MODULE_ENABLED 72 #define HAL_UART_MODULE_ENABLED 73 /*#define HAL_USART_MODULE_ENABLED */ 74 /*#define HAL_WWDG_MODULE_ENABLED */ 75 /*#define HAL_EXTI_MODULE_ENABLED */ 76 #define HAL_GPIO_MODULE_ENABLED 77 #define HAL_DMA_MODULE_ENABLED 78 #define HAL_RCC_MODULE_ENABLED 79 #define HAL_FLASH_MODULE_ENABLED 80 #define HAL_PWR_MODULE_ENABLED 81 #define HAL_CORTEX_MODULE_ENABLED 82 83 /* ########################## Oscillator Values adaptation ####################*/ 84 /** 85 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 86 * This value is used by the RCC HAL module to compute the system frequency 87 * (when HSE is used as system clock source, directly or through the PLL). 88 */ 89 #if !defined (HSE_VALUE) 90 #define HSE_VALUE ((uint32_t)24000000) /*!< Value of the External oscillator in Hz */ 91 #endif /* HSE_VALUE */ 92 93 #if !defined (HSE_STARTUP_TIMEOUT) 94 #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ 95 #endif /* HSE_STARTUP_TIMEOUT */ 96 97 /** 98 * @brief Internal Multiple Speed oscillator (MSI) default value. 99 * This value is the default MSI range value after Reset. 100 */ 101 #if !defined (MSI_VALUE) 102 #define MSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ 103 #endif /* MSI_VALUE */ 104 /** 105 * @brief Internal High Speed oscillator (HSI) value. 106 * This value is used by the RCC HAL module to compute the system frequency 107 * (when HSI is used as system clock source, directly or through the PLL). 108 */ 109 #if !defined (HSI_VALUE) 110 #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ 111 #endif /* HSI_VALUE */ 112 113 /** 114 * @brief Internal Low Speed oscillator (LSI) value. 115 */ 116 #if !defined (LSI_VALUE) 117 #define LSI_VALUE (37000U) /*!< LSI Typical Value in Hz*/ 118 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 119 The real value may vary depending on the variations 120 in voltage and temperature.*/ 121 122 /** 123 * @brief External Low Speed oscillator (LSE) value. 124 * This value is used by the UART, RTC HAL module to compute the system frequency 125 */ 126 #if !defined (LSE_VALUE) 127 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ 128 #endif /* LSE_VALUE */ 129 130 #if !defined (LSE_STARTUP_TIMEOUT) 131 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ 132 #endif /* HSE_STARTUP_TIMEOUT */ 133 134 /* Tip: To avoid modifying this file each time you need to use different HSE, 135 === you can define the HSE value in your toolchain compiler preprocessor. */ 136 137 /* ########################### System Configuration ######################### */ 138 /** 139 * @brief This is the HAL system configuration section 140 */ 141 142 #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ 143 #define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */ 144 #define USE_RTOS 0 145 #define PREFETCH_ENABLE 0 146 #define INSTRUCTION_CACHE_ENABLE 1 147 #define DATA_CACHE_ENABLE 1 148 149 /* ########################## Assert Selection ############################## */ 150 /** 151 * @brief Uncomment the line below to expanse the "assert_param" macro in the 152 * HAL drivers code 153 */ 154 /* #define USE_FULL_ASSERT 1U */ 155 156 /* ################## Register callback feature configuration ############### */ 157 /** 158 * @brief Set below the peripheral configuration to "1U" to add the support 159 * of HAL callback registration/deregistration feature for the HAL 160 * driver(s). This allows user application to provide specific callback 161 * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting 162 * the default weak callback functions (see each stm32l0xx_hal_ppp.h file 163 * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef 164 * for each PPP peripheral). 165 */ 166 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 167 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 168 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 169 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 170 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U 171 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 172 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 173 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 174 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 175 #define USE_HAL_SDMMC_REGISTER_CALLBACKS 0U 176 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 177 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 178 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 179 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 180 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 181 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 182 183 /* ################## SPI peripheral configuration ########################## */ 184 185 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 186 * Activated: CRC code is present inside driver 187 * Deactivated: CRC code cleaned from driver 188 */ 189 190 #define USE_SPI_CRC 0U 191 /* Includes ------------------------------------------------------------------*/ 192 /** 193 * @brief Include module's header file 194 */ 195 196 #ifdef HAL_RCC_MODULE_ENABLED 197 #include "stm32l1xx_hal_rcc.h" 198 #endif /* HAL_RCC_MODULE_ENABLED */ 199 200 #ifdef HAL_GPIO_MODULE_ENABLED 201 #include "stm32l1xx_hal_gpio.h" 202 #endif /* HAL_GPIO_MODULE_ENABLED */ 203 204 #ifdef HAL_DMA_MODULE_ENABLED 205 #include "stm32l1xx_hal_dma.h" 206 #endif /* HAL_DMA_MODULE_ENABLED */ 207 208 #ifdef HAL_CORTEX_MODULE_ENABLED 209 #include "stm32l1xx_hal_cortex.h" 210 #endif /* HAL_CORTEX_MODULE_ENABLED */ 211 212 #ifdef HAL_ADC_MODULE_ENABLED 213 #include "stm32l1xx_hal_adc.h" 214 #endif /* HAL_ADC_MODULE_ENABLED */ 215 216 #ifdef HAL_COMP_MODULE_ENABLED 217 #include "stm32l1xx_hal_comp.h" 218 #endif /* HAL_COMP_MODULE_ENABLED */ 219 220 #ifdef HAL_CRC_MODULE_ENABLED 221 #include "stm32l1xx_hal_crc.h" 222 #endif /* HAL_CRC_MODULE_ENABLED */ 223 224 #ifdef HAL_CRYP_MODULE_ENABLED 225 #include "stm32l1xx_hal_cryp.h" 226 #endif /* HAL_CRYP_MODULE_ENABLED */ 227 228 #ifdef HAL_DAC_MODULE_ENABLED 229 #include "stm32l1xx_hal_dac.h" 230 #endif /* HAL_DAC_MODULE_ENABLED */ 231 232 #ifdef HAL_FLASH_MODULE_ENABLED 233 #include "stm32l1xx_hal_flash.h" 234 #endif /* HAL_FLASH_MODULE_ENABLED */ 235 236 #ifdef HAL_SRAM_MODULE_ENABLED 237 #include "stm32l1xx_hal_sram.h" 238 #endif /* HAL_SRAM_MODULE_ENABLED */ 239 240 #ifdef HAL_NOR_MODULE_ENABLED 241 #include "stm32l1xx_hal_nor.h" 242 #endif /* HAL_NOR_MODULE_ENABLED */ 243 244 #ifdef HAL_I2C_MODULE_ENABLED 245 #include "stm32l1xx_hal_i2c.h" 246 #endif /* HAL_I2C_MODULE_ENABLED */ 247 248 #ifdef HAL_I2S_MODULE_ENABLED 249 #include "stm32l1xx_hal_i2s.h" 250 #endif /* HAL_I2S_MODULE_ENABLED */ 251 252 #ifdef HAL_IWDG_MODULE_ENABLED 253 #include "stm32l1xx_hal_iwdg.h" 254 #endif /* HAL_IWDG_MODULE_ENABLED */ 255 256 #ifdef HAL_LCD_MODULE_ENABLED 257 #include "stm32l1xx_hal_lcd.h" 258 #endif /* HAL_LCD_MODULE_ENABLED */ 259 260 #ifdef HAL_OPAMP_MODULE_ENABLED 261 #include "stm32l1xx_hal_opamp.h" 262 #endif /* HAL_OPAMP_MODULE_ENABLED */ 263 264 #ifdef HAL_PWR_MODULE_ENABLED 265 #include "stm32l1xx_hal_pwr.h" 266 #endif /* HAL_PWR_MODULE_ENABLED */ 267 268 #ifdef HAL_RTC_MODULE_ENABLED 269 #include "stm32l1xx_hal_rtc.h" 270 #endif /* HAL_RTC_MODULE_ENABLED */ 271 272 #ifdef HAL_SD_MODULE_ENABLED 273 #include "stm32l1xx_hal_sd.h" 274 #endif /* HAL_SD_MODULE_ENABLED */ 275 276 #ifdef HAL_SPI_MODULE_ENABLED 277 #include "stm32l1xx_hal_spi.h" 278 #endif /* HAL_SPI_MODULE_ENABLED */ 279 280 #ifdef HAL_TIM_MODULE_ENABLED 281 #include "stm32l1xx_hal_tim.h" 282 #endif /* HAL_TIM_MODULE_ENABLED */ 283 284 #ifdef HAL_UART_MODULE_ENABLED 285 #include "stm32l1xx_hal_uart.h" 286 #endif /* HAL_UART_MODULE_ENABLED */ 287 288 #ifdef HAL_USART_MODULE_ENABLED 289 #include "stm32l1xx_hal_usart.h" 290 #endif /* HAL_USART_MODULE_ENABLED */ 291 292 #ifdef HAL_IRDA_MODULE_ENABLED 293 #include "stm32l1xx_hal_irda.h" 294 #endif /* HAL_IRDA_MODULE_ENABLED */ 295 296 #ifdef HAL_SMARTCARD_MODULE_ENABLED 297 #include "stm32l1xx_hal_smartcard.h" 298 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 299 300 #ifdef HAL_WWDG_MODULE_ENABLED 301 #include "stm32l1xx_hal_wwdg.h" 302 #endif /* HAL_WWDG_MODULE_ENABLED */ 303 304 #ifdef HAL_PCD_MODULE_ENABLED 305 #include "stm32l1xx_hal_pcd.h" 306 #endif /* HAL_PCD_MODULE_ENABLED */ 307 308 #ifdef HAL_EXTI_MODULE_ENABLED 309 #include "stm32l1xx_hal_exti.h" 310 #endif /* HAL_EXTI_MODULE_ENABLED */ 311 312 /* Exported macro ------------------------------------------------------------*/ 313 #ifdef USE_FULL_ASSERT 314 /** 315 * @brief The assert_param macro is used for function's parameters check. 316 * @param expr: If expr is false, it calls assert_failed function 317 * which reports the name of the source file and the source 318 * line number of the call that failed. 319 * If expr is true, it returns no value. 320 * @retval None 321 */ 322 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 323 /* Exported functions ------------------------------------------------------- */ 324 void assert_failed(uint8_t* file, uint32_t line); 325 #else 326 #define assert_param(expr) ((void)0U) 327 #endif /* USE_FULL_ASSERT */ 328 329 #ifdef __cplusplus 330 } 331 #endif 332 333 #endif /* __STM32L1xx_HAL_CONF_H */ 334 335 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 336