1 /** 2 ****************************************************************************** 3 * @file stm32l5xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration file. 6 ****************************************************************************** 7 * @attention 8 * 9 * <h2><center>© Copyright (c) 2019 STMicroelectronics. 10 * All rights reserved.</center></h2> 11 * 12 * This software component is licensed by ST under BSD 3-Clause license, 13 * the "License"; You may not use this file except in compliance with the 14 * License. You may obtain a copy of the License at: 15 * opensource.org/licenses/BSD-3-Clause 16 * 17 ****************************************************************************** 18 */ 19 20 /* Define to prevent recursive inclusion -------------------------------------*/ 21 #ifndef STM32L5xx_HAL_CONF_H 22 #define STM32L5xx_HAL_CONF_H 23 24 #ifdef __cplusplus 25 extern "C" { 26 #endif 27 28 /* Exported types ------------------------------------------------------------*/ 29 /* Exported constants --------------------------------------------------------*/ 30 31 /* ########################## Module Selection ############################## */ 32 /** 33 * @brief This is the list of modules to be used in the HAL driver 34 */ 35 #define HAL_MODULE_ENABLED 36 /*#define HAL_ADC_MODULE_ENABLED */ 37 /*#define HAL_COMP_MODULE_ENABLED */ 38 /*#define HAL_CRC_MODULE_ENABLED */ 39 /*#define HAL_CRYP_MODULE_ENABLED */ 40 /*#define HAL_DAC_MODULE_ENABLED */ 41 /*#define HAL_DFSDM_MODULE_ENABLED */ 42 /*#define HAL_FDCAN_MODULE_ENABLED */ 43 /*#define HAL_GTZC_MODULE_ENABLED */ 44 /*#define HAL_HASH_MODULE_ENABLED */ 45 /*#define HAL_IRDA_MODULE_ENABLED */ 46 /*#define HAL_IWDG_MODULE_ENABLED */ 47 /*#define HAL_LPTIM_MODULE_ENABLED */ 48 /*#define HAL_MMC_MODULE_ENABLED */ 49 /*#define HAL_NAND_MODULE_ENABLED */ 50 /*#define HAL_NOR_MODULE_ENABLED */ 51 /*#define HAL_OPAMP_MODULE_ENABLED */ 52 /*#define HAL_OSPI_MODULE_ENABLED */ 53 /*#define HAL_OTFDEC_MODULE_ENABLED */ 54 /*#define HAL_PCD_MODULE_ENABLED */ 55 /*#define HAL_PKA_MODULE_ENABLED */ 56 /*#define HAL_RCC_MODULE_ENABLED */ 57 /*#define HAL_RNG_MODULE_ENABLED */ 58 /*#define HAL_RTC_MODULE_ENABLED */ 59 /*#define HAL_SAI_MODULE_ENABLED */ 60 /*#define HAL_SD_MODULE_ENABLED */ 61 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 62 /*#define HAL_SMBUS_MODULE_ENABLED */ 63 /*#define HAL_SPI_MODULE_ENABLED */ 64 /*#define HAL_SRAM_MODULE_ENABLED */ 65 /*#define HAL_TIM_MODULE_ENABLED */ 66 /*#define HAL_TSC_MODULE_ENABLED */ 67 #define HAL_UART_MODULE_ENABLED 68 /*#define HAL_USART_MODULE_ENABLED */ 69 /*#define HAL_WWDG_MODULE_ENABLED */ 70 #define HAL_GPIO_MODULE_ENABLED 71 #define HAL_EXTI_MODULE_ENABLED 72 #define HAL_I2C_MODULE_ENABLED 73 #define HAL_DMA_MODULE_ENABLED 74 #define HAL_RCC_MODULE_ENABLED 75 #define HAL_FLASH_MODULE_ENABLED 76 #define HAL_PWR_MODULE_ENABLED 77 #define HAL_CORTEX_MODULE_ENABLED 78 #define HAL_ICACHE_MODULE_ENABLED 79 80 /* ########################## Oscillator Values adaptation ####################*/ 81 /** 82 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 83 * This value is used by the RCC HAL module to compute the system frequency 84 * (when HSE is used as system clock source, directly or through the PLL). 85 */ 86 #if !defined (HSE_VALUE) 87 #define HSE_VALUE 16000000UL /*!< Value of the External oscillator in Hz */ 88 #endif /* HSE_VALUE */ 89 90 #if !defined (HSE_STARTUP_TIMEOUT) 91 #define HSE_STARTUP_TIMEOUT 100UL /*!< Time out for HSE start up, in ms */ 92 #endif /* HSE_STARTUP_TIMEOUT */ 93 94 /** 95 * @brief Internal Multiple Speed oscillator (MSI) default value. 96 * This value is the default MSI range value after Reset. 97 */ 98 #if !defined (MSI_VALUE) 99 #define MSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz*/ 100 #endif /* MSI_VALUE */ 101 102 /** 103 * @brief Internal High Speed oscillator (HSI) value. 104 * This value is used by the RCC HAL module to compute the system frequency 105 * (when HSI is used as system clock source, directly or through the PLL). 106 */ 107 #if !defined (HSI_VALUE) 108 #define HSI_VALUE 16000000UL /*!< Value of the Internal oscillator in Hz*/ 109 #endif /* HSI_VALUE */ 110 111 /** 112 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. 113 * This internal oscillator is mainly dedicated to provide a high precision clock to 114 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 115 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 116 * which is subject to manufacturing process variations. 117 */ 118 #if !defined (HSI48_VALUE) 119 #define HSI48_VALUE 48000000UL /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. 120 The real value my vary depending on manufacturing process variations.*/ 121 #endif /* HSI48_VALUE */ 122 123 /** 124 * @brief Internal Low Speed oscillator (LSI) value. 125 */ 126 #if !defined (LSI_VALUE) 127 #define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz*/ 128 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 129 The real value may vary depending on the variations 130 in voltage and temperature.*/ 131 /** 132 * @brief External Low Speed oscillator (LSE) value. 133 * This value is used by the UART, RTC HAL module to compute the system frequency 134 */ 135 #if !defined (LSE_VALUE) 136 #define LSE_VALUE 32768UL /*!< Value of the External oscillator in Hz*/ 137 #endif /* LSE_VALUE */ 138 139 #if !defined (LSE_STARTUP_TIMEOUT) 140 #define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up, in ms */ 141 #endif /* HSE_STARTUP_TIMEOUT */ 142 143 /** 144 * @brief External clock source for SAI1 peripheral 145 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 146 * frequency. 147 */ 148 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) 149 #define EXTERNAL_SAI1_CLOCK_VALUE 48000UL /*!< Value of the SAI1 External clock source in Hz*/ 150 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ 151 152 /** 153 * @brief External clock source for SAI2 peripheral 154 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 155 * frequency. 156 */ 157 #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) 158 #define EXTERNAL_SAI2_CLOCK_VALUE 48000UL /*!< Value of the SAI2 External clock source in Hz*/ 159 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */ 160 161 /* Tip: To avoid modifying this file each time you need to use different HSE, 162 === you can define the HSE value in your toolchain compiler preprocessor. */ 163 164 /* ########################### System Configuration ######################### */ 165 /** 166 * @brief This is the HAL system configuration section 167 */ 168 169 #define VDD_VALUE 3300UL /*!< Value of VDD in mv */ 170 #define TICK_INT_PRIORITY 7UL /*!< tick interrupt priority */ 171 #define USE_RTOS 0U 172 173 /* ########################## Assert Selection ############################## */ 174 /** 175 * @brief Uncomment the line below to expanse the "assert_param" macro in the 176 * HAL drivers code 177 */ 178 /* #define USE_FULL_ASSERT 1U */ 179 180 /* ################## Register callback feature configuration ############### */ 181 /** 182 * @brief Set below the peripheral configuration to "1U" to add the support 183 * of HAL callback registration/unregistration feature for the HAL 184 * driver(s). This allows user application to provide specific callback 185 * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting 186 * the default weak callback functions (see each stm32l5xx_hal_ppp.h file 187 * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef 188 * for each PPP peripheral). 189 */ 190 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 191 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 192 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U 193 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 194 #define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U 195 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U 196 #define USE_HAL_HASH_REGISTER_CALLBACKS 0U 197 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 198 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 199 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U 200 #define USE_HAL_MMC_REGISTER_CALLBACKS 0U 201 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U 202 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U 203 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 204 #define USE_HAL_OSPI_REGISTER_CALLBACKS 0U 205 #define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U 206 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 207 #define USE_HAL_PKA_REGISTER_CALLBACKS 0U 208 #define USE_HAL_RNG_REGISTER_CALLBACKS 0U 209 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 210 #define USE_HAL_SAI_REGISTER_CALLBACKS 0U 211 #define USE_HAL_SD_REGISTER_CALLBACKS 0U 212 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 213 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U 214 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 215 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U 216 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 217 #define USE_HAL_TSC_REGISTER_CALLBACKS 0U 218 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 219 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 220 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 221 222 /* ################## SPI peripheral configuration ########################## */ 223 224 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 225 * Activated: CRC code is present inside driver 226 * Deactivated: CRC code cleaned from driver 227 */ 228 229 #define USE_SPI_CRC 0U 230 231 /* ################## CRYP peripheral configuration ########################## */ 232 233 #define USE_HAL_CRYP_SUSPEND_RESUME 1U 234 235 /* ################## SDMMC peripheral configuration ######################### */ 236 237 #define USE_SD_TRANSCEIVER 0U 238 239 /* Includes ------------------------------------------------------------------*/ 240 /** 241 * @brief Include module's header file 242 */ 243 244 #ifdef HAL_RCC_MODULE_ENABLED 245 #include "stm32l5xx_hal_rcc.h" 246 #endif /* HAL_RCC_MODULE_ENABLED */ 247 248 #ifdef HAL_GPIO_MODULE_ENABLED 249 #include "stm32l5xx_hal_gpio.h" 250 #endif /* HAL_GPIO_MODULE_ENABLED */ 251 252 #ifdef HAL_DMA_MODULE_ENABLED 253 #include "stm32l5xx_hal_dma.h" 254 #endif /* HAL_DMA_MODULE_ENABLED */ 255 256 #ifdef HAL_DFSDM_MODULE_ENABLED 257 #include "stm32l5xx_hal_dfsdm.h" 258 #endif /* HAL_DFSDM_MODULE_ENABLED */ 259 260 #ifdef HAL_CORTEX_MODULE_ENABLED 261 #include "stm32l5xx_hal_cortex.h" 262 #endif /* HAL_CORTEX_MODULE_ENABLED */ 263 264 #ifdef HAL_ADC_MODULE_ENABLED 265 #include "stm32l5xx_hal_adc.h" 266 #endif /* HAL_ADC_MODULE_ENABLED */ 267 268 #ifdef HAL_COMP_MODULE_ENABLED 269 #include "stm32l5xx_hal_comp.h" 270 #endif /* HAL_COMP_MODULE_ENABLED */ 271 272 #ifdef HAL_CRC_MODULE_ENABLED 273 #include "stm32l5xx_hal_crc.h" 274 #endif /* HAL_CRC_MODULE_ENABLED */ 275 276 #ifdef HAL_CRYP_MODULE_ENABLED 277 #include "stm32l5xx_hal_cryp.h" 278 #endif /* HAL_CRYP_MODULE_ENABLED */ 279 280 #ifdef HAL_DAC_MODULE_ENABLED 281 #include "stm32l5xx_hal_dac.h" 282 #endif /* HAL_DAC_MODULE_ENABLED */ 283 284 #ifdef HAL_EXTI_MODULE_ENABLED 285 #include "stm32l5xx_hal_exti.h" 286 #endif /* HAL_EXTI_MODULE_ENABLED */ 287 288 #ifdef HAL_FDCAN_MODULE_ENABLED 289 #include "stm32l5xx_hal_fdcan.h" 290 #endif /* HAL_FDCAN_MODULE_ENABLED */ 291 292 #ifdef HAL_FLASH_MODULE_ENABLED 293 #include "stm32l5xx_hal_flash.h" 294 #endif /* HAL_FLASH_MODULE_ENABLED */ 295 296 #ifdef HAL_GTZC_MODULE_ENABLED 297 #include "stm32l5xx_hal_gtzc.h" 298 #endif /* HAL_GTZC_MODULE_ENABLED */ 299 300 #ifdef HAL_HASH_MODULE_ENABLED 301 #include "stm32l5xx_hal_hash.h" 302 #endif /* HAL_HASH_MODULE_ENABLED */ 303 304 #ifdef HAL_I2C_MODULE_ENABLED 305 #include "stm32l5xx_hal_i2c.h" 306 #endif /* HAL_I2C_MODULE_ENABLED */ 307 308 #ifdef HAL_ICACHE_MODULE_ENABLED 309 #include "stm32l5xx_hal_icache.h" 310 #endif /* HAL_ICACHE_MODULE_ENABLED */ 311 312 #ifdef HAL_IRDA_MODULE_ENABLED 313 #include "stm32l5xx_hal_irda.h" 314 #endif /* HAL_IRDA_MODULE_ENABLED */ 315 316 #ifdef HAL_IWDG_MODULE_ENABLED 317 #include "stm32l5xx_hal_iwdg.h" 318 #endif /* HAL_IWDG_MODULE_ENABLED */ 319 320 #ifdef HAL_LPTIM_MODULE_ENABLED 321 #include "stm32l5xx_hal_lptim.h" 322 #endif /* HAL_LPTIM_MODULE_ENABLED */ 323 324 #ifdef HAL_MMC_MODULE_ENABLED 325 #include "stm32l5xx_hal_mmc.h" 326 #endif /* HAL_MMC_MODULE_ENABLED */ 327 328 #ifdef HAL_NAND_MODULE_ENABLED 329 #include "stm32l5xx_hal_nand.h" 330 #endif /* HAL_NAND_MODULE_ENABLED */ 331 332 #ifdef HAL_NOR_MODULE_ENABLED 333 #include "stm32l5xx_hal_nor.h" 334 #endif /* HAL_NOR_MODULE_ENABLED */ 335 336 #ifdef HAL_OPAMP_MODULE_ENABLED 337 #include "stm32l5xx_hal_opamp.h" 338 #endif /* HAL_OPAMP_MODULE_ENABLED */ 339 340 #ifdef HAL_OSPI_MODULE_ENABLED 341 #include "stm32l5xx_hal_ospi.h" 342 #endif /* HAL_OSPI_MODULE_ENABLED */ 343 344 #ifdef HAL_OTFDEC_MODULE_ENABLED 345 #include "stm32l5xx_hal_otfdec.h" 346 #endif /* HAL_OTFDEC_MODULE_ENABLED */ 347 348 #ifdef HAL_PCD_MODULE_ENABLED 349 #include "stm32l5xx_hal_pcd.h" 350 #endif /* HAL_PCD_MODULE_ENABLED */ 351 352 #ifdef HAL_PKA_MODULE_ENABLED 353 #include "stm32l5xx_hal_pka.h" 354 #endif /* HAL_PKA_MODULE_ENABLED */ 355 356 #ifdef HAL_PWR_MODULE_ENABLED 357 #include "stm32l5xx_hal_pwr.h" 358 #endif /* HAL_PWR_MODULE_ENABLED */ 359 360 #ifdef HAL_RNG_MODULE_ENABLED 361 #include "stm32l5xx_hal_rng.h" 362 #endif /* HAL_RNG_MODULE_ENABLED */ 363 364 #ifdef HAL_RTC_MODULE_ENABLED 365 #include "stm32l5xx_hal_rtc.h" 366 #endif /* HAL_RTC_MODULE_ENABLED */ 367 368 #ifdef HAL_SAI_MODULE_ENABLED 369 #include "stm32l5xx_hal_sai.h" 370 #endif /* HAL_SAI_MODULE_ENABLED */ 371 372 #ifdef HAL_SD_MODULE_ENABLED 373 #include "stm32l5xx_hal_sd.h" 374 #endif /* HAL_SD_MODULE_ENABLED */ 375 376 #ifdef HAL_SMARTCARD_MODULE_ENABLED 377 #include "stm32l5xx_hal_smartcard.h" 378 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 379 380 #ifdef HAL_SMBUS_MODULE_ENABLED 381 #include "stm32l5xx_hal_smbus.h" 382 #endif /* HAL_SMBUS_MODULE_ENABLED */ 383 384 #ifdef HAL_SPI_MODULE_ENABLED 385 #include "stm32l5xx_hal_spi.h" 386 #endif /* HAL_SPI_MODULE_ENABLED */ 387 388 #ifdef HAL_SRAM_MODULE_ENABLED 389 #include "stm32l5xx_hal_sram.h" 390 #endif /* HAL_SRAM_MODULE_ENABLED */ 391 392 #ifdef HAL_TIM_MODULE_ENABLED 393 #include "stm32l5xx_hal_tim.h" 394 #endif /* HAL_TIM_MODULE_ENABLED */ 395 396 #ifdef HAL_TSC_MODULE_ENABLED 397 #include "stm32l5xx_hal_tsc.h" 398 #endif /* HAL_TSC_MODULE_ENABLED */ 399 400 #ifdef HAL_UART_MODULE_ENABLED 401 #include "stm32l5xx_hal_uart.h" 402 #endif /* HAL_UART_MODULE_ENABLED */ 403 404 #ifdef HAL_USART_MODULE_ENABLED 405 #include "stm32l5xx_hal_usart.h" 406 #endif /* HAL_USART_MODULE_ENABLED */ 407 408 #ifdef HAL_WWDG_MODULE_ENABLED 409 #include "stm32l5xx_hal_wwdg.h" 410 #endif /* HAL_WWDG_MODULE_ENABLED */ 411 412 /* Exported macro ------------------------------------------------------------*/ 413 #ifdef USE_FULL_ASSERT 414 /** 415 * @brief The assert_param macro is used for function's parameters check. 416 * @param expr If expr is false, it calls assert_failed function 417 * which reports the name of the source file and the source 418 * line number of the call that failed. 419 * If expr is true, it returns no value. 420 * @retval None 421 */ 422 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 423 /* Exported functions ------------------------------------------------------- */ 424 void assert_failed(uint8_t *file, uint32_t line); 425 #else 426 #define assert_param(expr) ((void)0U) 427 #endif /* USE_FULL_ASSERT */ 428 429 #ifdef __cplusplus 430 } 431 #endif 432 433 #endif /* STM32L5xx_HAL_CONF_H */ 434 435 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 436