1 /* USER CODE BEGIN Header */ 2 /** 3 ****************************************************************************** 4 * @file stm32f0xx_hal_conf.h 5 * @brief HAL configuration file. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 /* USER CODE END Header */ 19 20 /* Define to prevent recursive inclusion -------------------------------------*/ 21 #ifndef __STM32F0xx_HAL_CONF_H 22 #define __STM32F0xx_HAL_CONF_H 23 24 #ifdef __cplusplus 25 extern "C" { 26 #endif 27 28 /* Exported types ------------------------------------------------------------*/ 29 /* Exported constants --------------------------------------------------------*/ 30 31 /* ########################## Module Selection ############################## */ 32 /** 33 * @brief This is the list of modules to be used in the HAL driver 34 */ 35 #define HAL_MODULE_ENABLED 36 #define HAL_ADC_MODULE_ENABLED 37 /*#define HAL_CRYP_MODULE_ENABLED */ 38 /*#define HAL_CAN_MODULE_ENABLED */ 39 /*#define HAL_CEC_MODULE_ENABLED */ 40 /*#define HAL_COMP_MODULE_ENABLED */ 41 /*#define HAL_CRC_MODULE_ENABLED */ 42 /*#define HAL_CRYP_MODULE_ENABLED */ 43 /*#define HAL_TSC_MODULE_ENABLED */ 44 /*#define HAL_DAC_MODULE_ENABLED */ 45 /*#define HAL_I2S_MODULE_ENABLED */ 46 /*#define HAL_IWDG_MODULE_ENABLED */ 47 /*#define HAL_LCD_MODULE_ENABLED */ 48 /*#define HAL_LPTIM_MODULE_ENABLED */ 49 /*#define HAL_RNG_MODULE_ENABLED */ 50 /*#define HAL_RTC_MODULE_ENABLED */ 51 #define HAL_SPI_MODULE_ENABLED 52 #define HAL_TIM_MODULE_ENABLED 53 #define HAL_UART_MODULE_ENABLED 54 /*#define HAL_USART_MODULE_ENABLED */ 55 /*#define HAL_IRDA_MODULE_ENABLED */ 56 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 57 /*#define HAL_SMBUS_MODULE_ENABLED */ 58 /*#define HAL_WWDG_MODULE_ENABLED */ 59 /*#define HAL_PCD_MODULE_ENABLED */ 60 #define HAL_CORTEX_MODULE_ENABLED 61 #define HAL_DMA_MODULE_ENABLED 62 #define HAL_FLASH_MODULE_ENABLED 63 #define HAL_GPIO_MODULE_ENABLED 64 #define HAL_EXTI_MODULE_ENABLED 65 #define HAL_PWR_MODULE_ENABLED 66 #define HAL_RCC_MODULE_ENABLED 67 #define HAL_I2C_MODULE_ENABLED 68 69 /* ########################## HSE/HSI Values adaptation ##################### */ 70 /** 71 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 72 * This value is used by the RCC HAL module to compute the system frequency 73 * (when HSE is used as system clock source, directly or through the PLL). 74 */ 75 #if !defined (HSE_VALUE) 76 #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ 77 #endif /* HSE_VALUE */ 78 79 /** 80 * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 81 * Timeout value 82 */ 83 #if !defined (HSE_STARTUP_TIMEOUT) 84 #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ 85 #endif /* HSE_STARTUP_TIMEOUT */ 86 87 /** 88 * @brief Internal High Speed oscillator (HSI) value. 89 * This value is used by the RCC HAL module to compute the system frequency 90 * (when HSI is used as system clock source, directly or through the PLL). 91 */ 92 #if !defined (HSI_VALUE) 93 #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ 94 #endif /* HSI_VALUE */ 95 96 /** 97 * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 98 * Timeout value 99 */ 100 #if !defined (HSI_STARTUP_TIMEOUT) 101 #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */ 102 #endif /* HSI_STARTUP_TIMEOUT */ 103 104 /** 105 * @brief Internal High Speed oscillator for ADC (HSI14) value. 106 */ 107 #if !defined (HSI14_VALUE) 108 #define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz. 109 The real value may vary depending on the variations 110 in voltage and temperature. */ 111 #endif /* HSI14_VALUE */ 112 113 /** 114 * @brief Internal High Speed oscillator for USB (HSI48) value. 115 */ 116 #if !defined (HSI48_VALUE) 117 #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz. 118 The real value may vary depending on the variations 119 in voltage and temperature. */ 120 #endif /* HSI48_VALUE */ 121 122 /** 123 * @brief Internal Low Speed oscillator (LSI) value. 124 */ 125 #if !defined (LSI_VALUE) 126 #define LSI_VALUE ((uint32_t)40000) 127 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 128 The real value may vary depending on the variations 129 in voltage and temperature. */ 130 /** 131 * @brief External Low Speed oscillator (LSI) value. 132 */ 133 #if !defined (LSE_VALUE) 134 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ 135 #endif /* LSE_VALUE */ 136 137 /** 138 * @brief Time out for LSE start up value in ms. 139 */ 140 #if !defined (LSE_STARTUP_TIMEOUT) 141 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ 142 #endif /* LSE_STARTUP_TIMEOUT */ 143 144 /* Tip: To avoid modifying this file each time you need to use different HSE, 145 === you can define the HSE value in your toolchain compiler preprocessor. */ 146 147 /* ########################### System Configuration ######################### */ 148 /** 149 * @brief This is the HAL system configuration section 150 */ 151 #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ 152 #define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */ 153 /* Warning: Must be set to higher priority for HAL_Delay() */ 154 /* and HAL_GetTick() usage under interrupt context */ 155 #define USE_RTOS 0 156 #define PREFETCH_ENABLE 1 157 #define INSTRUCTION_CACHE_ENABLE 0 158 #define DATA_CACHE_ENABLE 0 159 #define USE_SPI_CRC 0U 160 161 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ 162 #define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ 163 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ 164 #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ 165 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ 166 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ 167 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ 168 #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ 169 #define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ 170 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ 171 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ 172 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ 173 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ 174 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ 175 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ 176 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ 177 #define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ 178 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ 179 180 /* ########################## Assert Selection ############################## */ 181 /** 182 * @brief Uncomment the line below to expanse the "assert_param" macro in the 183 * HAL drivers code 184 */ 185 /* #define USE_FULL_ASSERT 1U */ 186 187 /* Includes ------------------------------------------------------------------*/ 188 /** 189 * @brief Include module's header file 190 */ 191 192 #ifdef HAL_RCC_MODULE_ENABLED 193 #include "stm32f0xx_hal_rcc.h" 194 #endif /* HAL_RCC_MODULE_ENABLED */ 195 196 #ifdef HAL_GPIO_MODULE_ENABLED 197 #include "stm32f0xx_hal_gpio.h" 198 #endif /* HAL_GPIO_MODULE_ENABLED */ 199 200 #ifdef HAL_EXTI_MODULE_ENABLED 201 #include "stm32f0xx_hal_exti.h" 202 #endif /* HAL_EXTI_MODULE_ENABLED */ 203 204 #ifdef HAL_DMA_MODULE_ENABLED 205 #include "stm32f0xx_hal_dma.h" 206 #endif /* HAL_DMA_MODULE_ENABLED */ 207 208 #ifdef HAL_CORTEX_MODULE_ENABLED 209 #include "stm32f0xx_hal_cortex.h" 210 #endif /* HAL_CORTEX_MODULE_ENABLED */ 211 212 #ifdef HAL_ADC_MODULE_ENABLED 213 #include "stm32f0xx_hal_adc.h" 214 #endif /* HAL_ADC_MODULE_ENABLED */ 215 216 #ifdef HAL_CAN_MODULE_ENABLED 217 #include "stm32f0xx_hal_can.h" 218 #endif /* HAL_CAN_MODULE_ENABLED */ 219 220 #ifdef HAL_CEC_MODULE_ENABLED 221 #include "stm32f0xx_hal_cec.h" 222 #endif /* HAL_CEC_MODULE_ENABLED */ 223 224 #ifdef HAL_COMP_MODULE_ENABLED 225 #include "stm32f0xx_hal_comp.h" 226 #endif /* HAL_COMP_MODULE_ENABLED */ 227 228 #ifdef HAL_CRC_MODULE_ENABLED 229 #include "stm32f0xx_hal_crc.h" 230 #endif /* HAL_CRC_MODULE_ENABLED */ 231 232 #ifdef HAL_DAC_MODULE_ENABLED 233 #include "stm32f0xx_hal_dac.h" 234 #endif /* HAL_DAC_MODULE_ENABLED */ 235 236 #ifdef HAL_FLASH_MODULE_ENABLED 237 #include "stm32f0xx_hal_flash.h" 238 #endif /* HAL_FLASH_MODULE_ENABLED */ 239 240 #ifdef HAL_I2C_MODULE_ENABLED 241 #include "stm32f0xx_hal_i2c.h" 242 #endif /* HAL_I2C_MODULE_ENABLED */ 243 244 #ifdef HAL_I2S_MODULE_ENABLED 245 #include "stm32f0xx_hal_i2s.h" 246 #endif /* HAL_I2S_MODULE_ENABLED */ 247 248 #ifdef HAL_IRDA_MODULE_ENABLED 249 #include "stm32f0xx_hal_irda.h" 250 #endif /* HAL_IRDA_MODULE_ENABLED */ 251 252 #ifdef HAL_IWDG_MODULE_ENABLED 253 #include "stm32f0xx_hal_iwdg.h" 254 #endif /* HAL_IWDG_MODULE_ENABLED */ 255 256 #ifdef HAL_PCD_MODULE_ENABLED 257 #include "stm32f0xx_hal_pcd.h" 258 #endif /* HAL_PCD_MODULE_ENABLED */ 259 260 #ifdef HAL_PWR_MODULE_ENABLED 261 #include "stm32f0xx_hal_pwr.h" 262 #endif /* HAL_PWR_MODULE_ENABLED */ 263 264 #ifdef HAL_RTC_MODULE_ENABLED 265 #include "stm32f0xx_hal_rtc.h" 266 #endif /* HAL_RTC_MODULE_ENABLED */ 267 268 #ifdef HAL_SMARTCARD_MODULE_ENABLED 269 #include "stm32f0xx_hal_smartcard.h" 270 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 271 272 #ifdef HAL_SMBUS_MODULE_ENABLED 273 #include "stm32f0xx_hal_smbus.h" 274 #endif /* HAL_SMBUS_MODULE_ENABLED */ 275 276 #ifdef HAL_SPI_MODULE_ENABLED 277 #include "stm32f0xx_hal_spi.h" 278 #endif /* HAL_SPI_MODULE_ENABLED */ 279 280 #ifdef HAL_TIM_MODULE_ENABLED 281 #include "stm32f0xx_hal_tim.h" 282 #endif /* HAL_TIM_MODULE_ENABLED */ 283 284 #ifdef HAL_TSC_MODULE_ENABLED 285 #include "stm32f0xx_hal_tsc.h" 286 #endif /* HAL_TSC_MODULE_ENABLED */ 287 288 #ifdef HAL_UART_MODULE_ENABLED 289 #include "stm32f0xx_hal_uart.h" 290 #endif /* HAL_UART_MODULE_ENABLED */ 291 292 #ifdef HAL_USART_MODULE_ENABLED 293 #include "stm32f0xx_hal_usart.h" 294 #endif /* HAL_USART_MODULE_ENABLED */ 295 296 #ifdef HAL_WWDG_MODULE_ENABLED 297 #include "stm32f0xx_hal_wwdg.h" 298 #endif /* HAL_WWDG_MODULE_ENABLED */ 299 300 /* Exported macro ------------------------------------------------------------*/ 301 #ifdef USE_FULL_ASSERT 302 /** 303 * @brief The assert_param macro is used for function's parameters check. 304 * @param expr If expr is false, it calls assert_failed function 305 * which reports the name of the source file and the source 306 * line number of the call that failed. 307 * If expr is true, it returns no value. 308 * @retval None 309 */ 310 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 311 /* Exported functions ------------------------------------------------------- */ 312 void assert_failed(uint8_t* file, uint32_t line); 313 #else 314 #define assert_param(expr) ((void)0U) 315 #endif /* USE_FULL_ASSERT */ 316 317 #ifdef __cplusplus 318 } 319 #endif 320 321 #endif /* __STM32F0xx_HAL_CONF_H */ 322 323