1 /* USER CODE BEGIN Header */ 2 /** 3 ****************************************************************************** 4 * @file stm32f3xx_hal_conf.h 5 * @brief HAL configuration file. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 /* USER CODE END Header */ 19 20 /* Define to prevent recursive inclusion -------------------------------------*/ 21 #ifndef __STM32F3xx_HAL_CONF_H 22 #define __STM32F3xx_HAL_CONF_H 23 24 #ifdef __cplusplus 25 extern "C" { 26 #endif 27 28 /* Exported types ------------------------------------------------------------*/ 29 /* Exported constants --------------------------------------------------------*/ 30 31 /* ########################## Module Selection ############################## */ 32 /** 33 * @brief This is the list of modules to be used in the HAL driver 34 */ 35 36 #define HAL_MODULE_ENABLED 37 /*#define HAL_ADC_MODULE_ENABLED */ 38 /*#define HAL_CRYP_MODULE_ENABLED */ 39 /*#define HAL_CAN_MODULE_ENABLED */ 40 /*#define HAL_CEC_MODULE_ENABLED */ 41 /*#define HAL_NAND_MODULE_ENABLED */ 42 /*#define HAL_NOR_MODULE_ENABLED */ 43 /*#define HAL_PCCARD_MODULE_ENABLED */ 44 /*#define HAL_SRAM_MODULE_ENABLED */ 45 /*#define HAL_HRTIM_MODULE_ENABLED */ 46 /*#define HAL_OPAMP_MODULE_ENABLED */ 47 /*#define HAL_SDADC_MODULE_ENABLED */ 48 /*#define HAL_TSC_MODULE_ENABLED */ 49 /*#define HAL_COMP_MODULE_ENABLED */ 50 /*#define HAL_CRC_MODULE_ENABLED */ 51 /*#define HAL_CRYP_MODULE_ENABLED */ 52 /*#define HAL_DAC_MODULE_ENABLED */ 53 /*#define HAL_I2S_MODULE_ENABLED */ 54 /*#define HAL_IWDG_MODULE_ENABLED */ 55 /*#define HAL_LCD_MODULE_ENABLED */ 56 /*#define HAL_LPTIM_MODULE_ENABLED */ 57 /*#define HAL_RNG_MODULE_ENABLED */ 58 /*#define HAL_RTC_MODULE_ENABLED */ 59 /*#define HAL_SPI_MODULE_ENABLED */ 60 /*#define HAL_TIM_MODULE_ENABLED */ 61 #define HAL_UART_MODULE_ENABLED 62 /*#define HAL_USART_MODULE_ENABLED */ 63 /*#define HAL_IRDA_MODULE_ENABLED */ 64 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 65 /*#define HAL_SMBUS_MODULE_ENABLED */ 66 /*#define HAL_WWDG_MODULE_ENABLED */ 67 /*#define HAL_PCD_MODULE_ENABLED */ 68 #define HAL_GPIO_MODULE_ENABLED 69 #define HAL_EXTI_MODULE_ENABLED 70 /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ 71 #define HAL_DMA_MODULE_ENABLED 72 #define HAL_RCC_MODULE_ENABLED 73 #define HAL_FLASH_MODULE_ENABLED 74 #define HAL_PWR_MODULE_ENABLED 75 #define HAL_CORTEX_MODULE_ENABLED 76 #define HAL_I2C_MODULE_ENABLED 77 /* ########################## HSE/HSI Values adaptation ##################### */ 78 /** 79 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 80 * This value is used by the RCC HAL module to compute the system frequency 81 * (when HSE is used as system clock source, directly or through the PLL). 82 */ 83 #if !defined (HSE_VALUE) 84 #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ 85 #endif /* HSE_VALUE */ 86 87 /** 88 * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 89 * Timeout value 90 */ 91 #if !defined (HSE_STARTUP_TIMEOUT) 92 #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ 93 #endif /* HSE_STARTUP_TIMEOUT */ 94 95 /** 96 * @brief Internal High Speed oscillator (HSI) value. 97 * This value is used by the RCC HAL module to compute the system frequency 98 * (when HSI is used as system clock source, directly or through the PLL). 99 */ 100 #if !defined (HSI_VALUE) 101 #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ 102 #endif /* HSI_VALUE */ 103 104 /** 105 * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 106 * Timeout value 107 */ 108 #if !defined (HSI_STARTUP_TIMEOUT) 109 #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */ 110 #endif /* HSI_STARTUP_TIMEOUT */ 111 112 /** 113 * @brief Internal Low Speed oscillator (LSI) value. 114 */ 115 #if !defined (LSI_VALUE) 116 #define LSI_VALUE ((uint32_t)40000) 117 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 118 The real value may vary depending on the variations 119 in voltage and temperature. */ 120 /** 121 * @brief External Low Speed oscillator (LSE) value. 122 */ 123 #if !defined (LSE_VALUE) 124 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ 125 #endif /* LSE_VALUE */ 126 127 /** 128 * @brief Time out for LSE start up value in ms. 129 */ 130 #if !defined (LSE_STARTUP_TIMEOUT) 131 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ 132 #endif /* LSE_STARTUP_TIMEOUT */ 133 134 /** 135 * @brief External clock source for I2S peripheral 136 * This value is used by the I2S HAL module to compute the I2S clock source 137 * frequency, this source is inserted directly through I2S_CKIN pad. 138 * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) 139 * - External clock not generated on EVAL 373 140 */ 141 #if !defined (EXTERNAL_CLOCK_VALUE) 142 #define EXTERNAL_CLOCK_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/ 143 #endif /* EXTERNAL_CLOCK_VALUE */ 144 145 /* Tip: To avoid modifying this file each time you need to use different HSE, 146 === you can define the HSE value in your toolchain compiler preprocessor. */ 147 148 /* ########################### System Configuration ######################### */ 149 /** 150 * @brief This is the HAL system configuration section 151 */ 152 153 #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ 154 #define TICK_INT_PRIORITY ((uint32_t)15) /*!< tick interrupt priority (lowest by default) */ 155 #define USE_RTOS 0 156 #define PREFETCH_ENABLE 1 157 #define INSTRUCTION_CACHE_ENABLE 0 158 #define DATA_CACHE_ENABLE 0 159 #define USE_SPI_CRC 0U 160 161 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ 162 #define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ 163 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ 164 #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ 165 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ 166 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ 167 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ 168 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ 169 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ 170 #define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ 171 #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ 172 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ 173 #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ 174 #define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ 175 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ 176 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ 177 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ 178 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ 179 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ 180 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ 181 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ 182 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ 183 #define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ 184 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ 185 186 /* ########################## Assert Selection ############################## */ 187 /** 188 * @brief Uncomment the line below to expanse the "assert_param" macro in the 189 * HAL drivers code 190 */ 191 /* #define USE_FULL_ASSERT 1U */ 192 193 /* Includes ------------------------------------------------------------------*/ 194 /** 195 * @brief Include module's header file 196 */ 197 198 #ifdef HAL_RCC_MODULE_ENABLED 199 #include "stm32f3xx_hal_rcc.h" 200 #endif /* HAL_RCC_MODULE_ENABLED */ 201 202 #ifdef HAL_GPIO_MODULE_ENABLED 203 #include "stm32f3xx_hal_gpio.h" 204 #endif /* HAL_GPIO_MODULE_ENABLED */ 205 206 #ifdef HAL_EXTI_MODULE_ENABLED 207 #include "stm32f3xx_hal_exti.h" 208 #endif /* HAL_EXTI_MODULE_ENABLED */ 209 210 #ifdef HAL_DMA_MODULE_ENABLED 211 #include "stm32f3xx_hal_dma.h" 212 #endif /* HAL_DMA_MODULE_ENABLED */ 213 214 #ifdef HAL_CORTEX_MODULE_ENABLED 215 #include "stm32f3xx_hal_cortex.h" 216 #endif /* HAL_CORTEX_MODULE_ENABLED */ 217 218 #ifdef HAL_ADC_MODULE_ENABLED 219 #include "stm32f3xx_hal_adc.h" 220 #endif /* HAL_ADC_MODULE_ENABLED */ 221 222 #ifdef HAL_CAN_MODULE_ENABLED 223 #include "stm32f3xx_hal_can.h" 224 #endif /* HAL_CAN_MODULE_ENABLED */ 225 226 #ifdef HAL_CAN_LEGACY_MODULE_ENABLED 227 #include "stm32f3xx_hal_can_legacy.h" 228 #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ 229 230 #ifdef HAL_CEC_MODULE_ENABLED 231 #include "stm32f3xx_hal_cec.h" 232 #endif /* HAL_CEC_MODULE_ENABLED */ 233 234 #ifdef HAL_COMP_MODULE_ENABLED 235 #include "stm32f3xx_hal_comp.h" 236 #endif /* HAL_COMP_MODULE_ENABLED */ 237 238 #ifdef HAL_CRC_MODULE_ENABLED 239 #include "stm32f3xx_hal_crc.h" 240 #endif /* HAL_CRC_MODULE_ENABLED */ 241 242 #ifdef HAL_DAC_MODULE_ENABLED 243 #include "stm32f3xx_hal_dac.h" 244 #endif /* HAL_DAC_MODULE_ENABLED */ 245 246 #ifdef HAL_FLASH_MODULE_ENABLED 247 #include "stm32f3xx_hal_flash.h" 248 #endif /* HAL_FLASH_MODULE_ENABLED */ 249 250 #ifdef HAL_SRAM_MODULE_ENABLED 251 #include "stm32f3xx_hal_sram.h" 252 #endif /* HAL_SRAM_MODULE_ENABLED */ 253 254 #ifdef HAL_NOR_MODULE_ENABLED 255 #include "stm32f3xx_hal_nor.h" 256 #endif /* HAL_NOR_MODULE_ENABLED */ 257 258 #ifdef HAL_NAND_MODULE_ENABLED 259 #include "stm32f3xx_hal_nand.h" 260 #endif /* HAL_NAND_MODULE_ENABLED */ 261 262 #ifdef HAL_PCCARD_MODULE_ENABLED 263 #include "stm32f3xx_hal_pccard.h" 264 #endif /* HAL_PCCARD_MODULE_ENABLED */ 265 266 #ifdef HAL_HRTIM_MODULE_ENABLED 267 #include "stm32f3xx_hal_hrtim.h" 268 #endif /* HAL_HRTIM_MODULE_ENABLED */ 269 270 #ifdef HAL_I2C_MODULE_ENABLED 271 #include "stm32f3xx_hal_i2c.h" 272 #endif /* HAL_I2C_MODULE_ENABLED */ 273 274 #ifdef HAL_I2S_MODULE_ENABLED 275 #include "stm32f3xx_hal_i2s.h" 276 #endif /* HAL_I2S_MODULE_ENABLED */ 277 278 #ifdef HAL_IRDA_MODULE_ENABLED 279 #include "stm32f3xx_hal_irda.h" 280 #endif /* HAL_IRDA_MODULE_ENABLED */ 281 282 #ifdef HAL_IWDG_MODULE_ENABLED 283 #include "stm32f3xx_hal_iwdg.h" 284 #endif /* HAL_IWDG_MODULE_ENABLED */ 285 286 #ifdef HAL_OPAMP_MODULE_ENABLED 287 #include "stm32f3xx_hal_opamp.h" 288 #endif /* HAL_OPAMP_MODULE_ENABLED */ 289 290 #ifdef HAL_PCD_MODULE_ENABLED 291 #include "stm32f3xx_hal_pcd.h" 292 #endif /* HAL_PCD_MODULE_ENABLED */ 293 294 #ifdef HAL_PWR_MODULE_ENABLED 295 #include "stm32f3xx_hal_pwr.h" 296 #endif /* HAL_PWR_MODULE_ENABLED */ 297 298 #ifdef HAL_RTC_MODULE_ENABLED 299 #include "stm32f3xx_hal_rtc.h" 300 #endif /* HAL_RTC_MODULE_ENABLED */ 301 302 #ifdef HAL_SDADC_MODULE_ENABLED 303 #include "stm32f3xx_hal_sdadc.h" 304 #endif /* HAL_SDADC_MODULE_ENABLED */ 305 306 #ifdef HAL_SMARTCARD_MODULE_ENABLED 307 #include "stm32f3xx_hal_smartcard.h" 308 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 309 310 #ifdef HAL_SMBUS_MODULE_ENABLED 311 #include "stm32f3xx_hal_smbus.h" 312 #endif /* HAL_SMBUS_MODULE_ENABLED */ 313 314 #ifdef HAL_SPI_MODULE_ENABLED 315 #include "stm32f3xx_hal_spi.h" 316 #endif /* HAL_SPI_MODULE_ENABLED */ 317 318 #ifdef HAL_TIM_MODULE_ENABLED 319 #include "stm32f3xx_hal_tim.h" 320 #endif /* HAL_TIM_MODULE_ENABLED */ 321 322 #ifdef HAL_TSC_MODULE_ENABLED 323 #include "stm32f3xx_hal_tsc.h" 324 #endif /* HAL_TSC_MODULE_ENABLED */ 325 326 #ifdef HAL_UART_MODULE_ENABLED 327 #include "stm32f3xx_hal_uart.h" 328 #endif /* HAL_UART_MODULE_ENABLED */ 329 330 #ifdef HAL_USART_MODULE_ENABLED 331 #include "stm32f3xx_hal_usart.h" 332 #endif /* HAL_USART_MODULE_ENABLED */ 333 334 #ifdef HAL_WWDG_MODULE_ENABLED 335 #include "stm32f3xx_hal_wwdg.h" 336 #endif /* HAL_WWDG_MODULE_ENABLED */ 337 338 /* Exported macro ------------------------------------------------------------*/ 339 #ifdef USE_FULL_ASSERT 340 /** 341 * @brief The assert_param macro is used for function's parameters check. 342 * @param expr If expr is false, it calls assert_failed function 343 * which reports the name of the source file and the source 344 * line number of the call that failed. 345 * If expr is true, it returns no value. 346 * @retval None 347 */ 348 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 349 /* Exported functions ------------------------------------------------------- */ 350 void assert_failed(uint8_t* file, uint32_t line); 351 #else 352 #define assert_param(expr) ((void)0U) 353 #endif /* USE_FULL_ASSERT */ 354 355 #ifdef __cplusplus 356 } 357 #endif 358 359 #endif /* __STM32F3xx_HAL_CONF_H */ 360