1# STM32F413-Nucleo BSP Introduction
2
3[中文](README_zh.md)
4
5## MCU: STM32F413ZH @100MHz, 1.5 MB FLASH,  320KB RAM
6
7The STM32F413xG/H devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 100 MHz. Their Cortex®-M4 core features a Floating point unit (FPU) single precision which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
8
9The STM32F413xG/H devices belong to the STM32F4 access product lines (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.
10The STM32F413xG/H devices incorporate high-speed embedded memories (up to 1.5 Mbytes of Flash memory, 320 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
11All devices offer a 12-bit ADC, two 12-bit DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timer for motor control, two general-purpose 32-bit timers and a low power timer.
12They also feature standard and advanced communication interfaces.
13
14#### KEY FEATURES
15
16- Dynamic Efficiency Line with eBAM (enhanced Batch Acquisition Mode)
17  - 1.7 V to 3.6 V power supply
18  - -40 °C to 85/105/125 °C temperature range
19- Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
20- Memories
21  - Up to 1.5 Mbytes of Flash memory
22  - 320 Kbytes of SRAM
23  - Flexible external static memory controller with up to 16-bit data bus: SRAM, PSRAM, NOR Flash memory
24  - Dual mode Quad-SPI interface
25- LCD parallel interface, 8080/6800 modes
26- Clock, reset and supply management
27  - 1.7 to 3.6 V application supply and I/Os
28  - POR, PDR, PVD and BOR
29  - 4-to-26 MHz crystal oscillator
30  - Internal 16 MHz factory-trimmed RC
31  - 32 kHz oscillator for RTC with calibration
32  - Internal 32 kHz RC with calibration
33- Power consumption
34  - Run: 112 μA/MHz (peripheral off)
35  - Stop (Flash in Stop mode, fast wakeup time): 42 μA Typ.; 80 μA max @25 °C
36  - Stop (Flash in Deep power down mode, slow wakeup time): 15 μA Typ.; 46 μA max @25 °C
37  - Standby without RTC: 1.1 μA Typ.; 14.7 μA max at @85 °C
38  - VBAT supply for RTC: 1 μA @25 °C
39- 2x12-bit D/A converters
40- 1×12-bit, 2.4 MSPS ADC: up to 16 channels
41- 6x digital filters for sigma delta modulator, 12x PDM interfaces, with stereo microphone and sound source localization support
42- General-purpose DMA: 16-stream DMA
43
44- Up to 18 timers: up to twelve 16-bit timers, two 32-bit timers up to 100 MHz each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window), one SysTick timer, and a low-power timer
45- Debug mode
46  - Serial wire debug (SWD) & JTAG
47  - Cortex®-M4 Embedded Trace Macrocell™
48- Up to 114 I/O ports with interrupt capability
49  - Up to 109 fast I/Os up to 100 MHz
50  - Up to 114 five V-tolerant I/Os
51- Up to 24 communication interfaces
52  - Up to 4x I2C interfaces (SMBus/PMBus)
53  - Up to 10 UARTS: 4 USARTs / 6 UARTs (2 x 12.5 Mbit/s, 2 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
54  - Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI or I2S audio protocol), out of which 2 muxed full-duplex I2S interfaces
55  - SDIO interface (SD/MMC/eMMC)
56  - Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with PHY
57  - 3x CAN (2.0B Active)
58  - 1xSAI
59- True random number generator
60- CRC calculation unit
61- 96-bit unique ID
62- RTC: subsecond accuracy, hardware calendar
63- All packages are ECOPACK®2
64
65
66
67## Read more
68
69|                          Documents                           |                         Description                          |
70| :----------------------------------------------------------: | :----------------------------------------------------------: |
71| [STM32_Nucleo-144_BSP_Introduction](../docs/STM32_Nucleo-144_BSP_Introduction.md) | How to run RT-Thread on STM32 Nucleo-144 boards (**Must-Read**) |
72| [STM32F413ZH ST Official Website](https://www.st.com/zh/microcontrollers-microprocessors/stm32f413zh.html#documentation) |          STM32F413ZH datasheet and other resources           |
73
74
75
76## Maintained By
77
78[flybreak](https://github.com/guozhanxin)  g1171407708@163.com
79
80
81
82## Translated By
83
84Meco Man @ RT-Thread Community
85
86> jiantingman@foxmail.com
87>
88> https://github.com/mysterywolf