README.md
1# The Arduino Compatible for STM32F469 Discovery Board
2
3**English** | [中文](README_zh.md)
4
5## 1 RTduino - Arduino Ecosystem Compatibility Layer for RT-Thread
6
7STM32F469 Discovery board has support [RTduino](https://github.com/RTduino/RTduino). Users can use Arduino APIs, third party libraries and programming method to program on the board.
8
9### 1.1 How to Enable RTduino
10
11Please go to the [RTduino repository](https://github.com/RTduino/RTduino) to see the details.
12
13```Kconfig
14Hardware Drivers Config --->
15 Onboard Peripheral Drivers --->
16 [*] Compatible with Arduino Ecosystem (RTduino)
17```
18
19## 2 Arduino Pinout
20
21
22
23This board complies with Arduino UNO pins layout. For more details, please take a look at: [pins_arduino.c](pins_arduino.c) and [pins_arduino.h](pins_arduino.h).
24
25| Arduino Pin | STM32 Pin | 5V Tolerate | Note |
26| --------------------- | --------- | ----------- | --------------------------------------------------------------------------------------------- |
27| 0 (D0) | PG9 | Yes | Serial-Rx. Token over by RT-Thread UART device by default |
28| 1 (D1) | PG14 | Yes | Serial-Tx. Token over by RT-Thread UART device by default |
29| 2 (D2) | PG13 | Yes | |
30| 3 (D3) | PA1 | Yes | PWM2-CH2. Token over by RT-Thread PWM device by default |
31| 4 (D4) | PG12 | Yes | |
32| 5 (D5) | PA2 | Yes | PWM2-CH3. Token over by RT-Thread PWM device by default |
33| 6 (D6) | PA6 | Yes | PWM3-CH1. Token over by RT-Thread PWM device by default |
34| 7 (D7) | PG11 | Yes | |
35| 8 (D8) | PG10 | Yes | |
36| 9 (D9) | PA7 | Yes | PWM3-CH2. Token over by RT-Thread PWM device by default |
37| 10 (D10) | PH6 | Yes | PWM12-CH1. Token over by RT-Thread PWM device by default |
38| 11 (D11) | PB15 | Yes | PWM12-CH2. Token over by RT-Thread PWM device by default |
39| 12 (D12) | PB14 | Yes | |
40| 13 (D13, LED_BUILTIN) | PD3 | Yes | USER LED1 |
41| 14 (D14) | PB9 | Yes | I2C-SDA. Token over by RT-Thread I2C device by default |
42| 15 (D15) | PB8 | Yes | I2C-SCL. Token over by RT-Thread I2C device by default |
43| 16 (D16) | PA0 | Yes | USER Button |
44| 17（D17） | PG6 | Yes | USER LED2 |
45| 18（D18） | PD4 | Yes | USER LED3 |
46| 19（D19） | PD5 | Yes | USER LED4 |
47| 20（D20） | PK3 | Yes | USER LED5 |
48| A0 | PB1 | Yes | ADC1-CH9. Token over by RT-Thread ADC device by default |
49| A1 | PC2 | Yes | ADC1-CH12. Token over by RT-Thread ADC device by default |
50| A2 | PC3 | Yes | ADC1-CH13. Token over by RT-Thread ADC device by default |
51| A3 | PC4 | Yes | ADC1-CH14. Token over by RT-Thread ADC device by default |
52| A4 | PC5 | Yes | ADC1-CH15. Token over by RT-Thread ADC device by default |
53| A5 | PA4 | Yes | ADC1-CH4. Token over by RT-Thread ADC device by default |
54| A6 | -- | | On-chip internal voltage sensor. ADC1-CH17. Token over by RT-Thread ADC device by default |
55| A7 | -- | | On-chip internal temperature sensor. ADC1-CH16. Token over by RT-Thread ADC device by default |
56
57> Notice:
58>
59> 1. Don't use a same hardware timer to drive PWM (analogRead) and servos at same time, because hardware timers can only generate a same frequency for 4 PWM channels. Otherwise, it could cause a failure when drive servos.
60
61> References
62>
63> 1. [STM32F469 Discovery ST Website](https://www.st.com/en/evaluation-tools/32f469idiscovery.html#documentation)
64
65## 3 Communication
66
67### 3.1 I2C Bus
68
69I2C bus is `SCL/D15` and `SDA/D14` pins. Users can directly include the `#include <Wire.h>`, which is the Arduino official I2C header file, to use the I2C bus.
70
71### 3.2 SPI Bus
72
73This board doesn't support Arduino SPI header file and functions.
74
75### 3.3 Serial
76
77This board supports to use `Serial.` method to operate `uart3` device. See [example](https://github.com/RTduino/RTduino/blob/master/examples/Basic/helloworld.cpp).
78
79### 3.4 USB Virtual Serial
80
81This board supports USB virtual serial. See [example](https://github.com/RTduino/RTduino/tree/master/examples/USBSerial). You may enable it if is needed.
82
83```Kconfig
84RT-Thread online packages --->
85 Arduino libraries --->
86 [*] RTduino: Arduino Ecological Compatibility Layer
87 [*] Enable USB Serial
88```
89
README_zh.md
1# STM32F469 Discovery开发板的Arduino生态兼容说明
2
3[English](README.md) | **中文**
4
5## 1 RTduino - RT-Thread的Arduino生态兼容层
6
7STM32F469 Discovery开发板已经完整适配了[RTduino软件包](https://github.com/RTduino/RTduino)，即RT-Thread的Arduino生态兼容层。用户可以按照Arduino的编程习惯来操作该BSP，并且可以使用大量Arduino社区丰富的库，是对RT-Thread生态的极大增强。更多信息，请参见[RTduino软件包说明文档](https://github.com/RTduino/RTduino)。
8
9### 1.1 如何开启针对本BSP的Arduino生态兼容层
10
11Env 工具下敲入 menuconfig 命令，或者 RT-Thread Studio IDE 下选择 RT-Thread Settings：
12
13```Kconfig
14Hardware Drivers Config --->
15 Onboard Peripheral Drivers --->
16 [*] Compatible with Arduino Ecosystem (RTduino)
17```
18
19## 2 Arduino引脚排布
20
21
22
23该BSP遵照Arduino UNO板的引脚排列方式，详见 [pins_arduino.c](pins_arduino.c) 和 [pins_arduino.h](pins_arduino.h)。
24
25| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 |
26| --------------------- | --------- | ---- | --------------------------------------------- |
27| 0 (D0) | PG9 | 是 | Serial-Rx，默认被RT-Thread的UART设备框架uart3接管 |
28| 1 (D1) | PG14 | 是 | Serial-Tx，默认被RT-Thread的UART设备框架uart3接管 |
29| 2 (D2) | PG13 | 是 | |
30| 3 (D3) | PA1 | 是 | PWM2-CH2，默认被RT-Thread的PWM设备框架pwm2接管 |
31| 4 (D4) | PG12 | 是 | |
32| 5 (D5) | PA2 | 是 | PWM2-CH3，默认被RT-Thread的PWM设备框架pwm2接管 |
33| 6 (D6) | PA6 | 是 | PWM3-CH1，默认被RT-Thread的PWM设备框架pwm3接管 |
34| 7 (D7) | PG11 | 是 | |
35| 8 (D8) | PG10 | 是 | |
36| 9 (D9) | PA7 | 是 | PWM3-CH2，默认被RT-Thread的PWM设备框架pwm3接管 |
37| 10 (D10) | PH6 | 是 | PWM12-CH1，默认被RT-Thread的PWM设备框架pwm12接管 |
38| 11 (D11) | PB15 | 是 | PWM12-CH2，默认被RT-Thread的PWM设备框架pwm12接管 |
39| 12 (D12) | PB14 | 是 | |
40| 13 (D13, LED_BUILTIN) | PD3 | 是 | 板载用户LED1 |
41| 14 (D14) | PB9 | 是 | I2C-SDA，被RT-Thread的I2C设备框架i2c1总线接管 |
42| 15 (D15) | PB8 | 是 | I2C-SCL，被RT-Thread的I2C设备框架i2c1总线接管 |
43| 16 (D16) | PA0 | 是 | 板载用户按键 |
44| 17（D17） | PG6 | 是 | 板载用户LED2 |
45| 18（D18） | PD4 | 是 | 板载用户LED3 |
46| 19（D19） | PD5 | 是 | 板载用户LED4 |
47| 20（D20） | PK3 | 是 | 板载用户LED5 |
48| A0 | PB1 | 是 | ADC1-CH9，默认被RT-Thread的ADC设备框架adc1接管 |
49| A1 | PC2 | 是 | ADC1-CH12，默认被RT-Thread的ADC设备框架adc1接管 |
50| A2 | PC3 | 是 | ADC1-CH13，默认被RT-Thread的ADC设备框架adc1接管 |
51| A3 | PC4 | 是 | ADC1-CH14，默认被RT-Thread的ADC设备框架adc1接管 |
52| A4 | PC5 | 是 | ADC1-CH15，默认被RT-Thread的ADC设备框架adc1接管 |
53| A5 | PA4 | 是 | ADC1-CH4，默认被RT-Thread的ADC设备框架adc1接管 |
54| A6 | -- | | 芯片内部参考电压 ADC1-CH17，默认被RT-Thread的ADC设备框架adc1接管 |
55| A7 | -- | | 芯片内部温度 ADC1-CH16，默认被RT-Thread的ADC设备框架adc1接管 |
56
57> 注意：
58>
59> 1. 驱动舵机和analogWrite函数要选择不同定时器发生的PWM信号引脚，由于STM32的定时器4个通道需要保持相同的频率，如果采用相同的定时器发生的PWM分别驱动舵机和analogWrite，可能会导致舵机失效。
60
61> 参考资料
62>
63> 1. [STM32F469 Discovery官方资料](https://www.st.com/zh/evaluation-tools/32f469idiscovery.html#documentation)
64
65## 3 通信
66
67### 3.1 I2C总线
68
69本BSP的I2C总线是板上丝印的 `SCL/D15` 和 `SDA/D14` 引脚，这两个引脚是被RT-Thread I2C设备框架接管的，不需要直接操控这两个引脚，直接引用`#include <Wire.h>`（Arduino官方I2C头文件）即可使用。
70
71### 3.2 SPI总线
72
73目前本BSP不支持使用Arduino的SPI功能。
74
75### 3.3 串口
76
77本BSP通过 `Serial.` 方法调用 `uart3` 串口设备。详见[例程](https://github.com/RTduino/RTduino/blob/master/examples/Basic/helloworld.cpp)。
78
79### 3.4 USB虚拟串口
80
81本BSP支持USB虚拟串口，如果需要使用，可以手动使能。详见[例程](https://github.com/RTduino/RTduino/tree/master/examples/USBSerial)。
82
83```Kconfig
84RT-Thread online packages --->
85 Arduino libraries --->
86 [*] RTduino: Arduino Ecological Compatibility Layer
87 [*] Enable USB Serial
88```
89
