1 /* USER CODE BEGIN Header */ 2 /** 3 ****************************************************************************** 4 * @file stm32g0xx_hal_conf.h 5 * @author MCD Application Team 6 * @brief HAL configuration file. 7 ****************************************************************************** 8 * @attention 9 * 10 * Copyright (c) 2018 STMicroelectronics. 11 * All rights reserved. 12 * 13 * This software is licensed under terms that can be found in the LICENSE file 14 * in the root directory of this software component. 15 * If no LICENSE file comes with this software, it is provided AS-IS. 16 * 17 ****************************************************************************** 18 */ 19 /* USER CODE END Header */ 20 21 /* Define to prevent recursive inclusion -------------------------------------*/ 22 #ifndef STM32G0xx_HAL_CONF_H 23 #define STM32G0xx_HAL_CONF_H 24 25 #ifdef __cplusplus 26 extern "C" { 27 #endif 28 29 /* Exported types ------------------------------------------------------------*/ 30 /* Exported constants --------------------------------------------------------*/ 31 32 /* ########################## Module Selection ############################## */ 33 /** 34 * @brief This is the list of modules to be used in the HAL driver 35 */ 36 #define HAL_MODULE_ENABLED 37 /* #define HAL_ADC_MODULE_ENABLED */ 38 /* #define HAL_CEC_MODULE_ENABLED */ 39 /* #define HAL_COMP_MODULE_ENABLED */ 40 /* #define HAL_CRC_MODULE_ENABLED */ 41 /* #define HAL_CRYP_MODULE_ENABLED */ 42 /* #define HAL_DAC_MODULE_ENABLED */ 43 /* #define HAL_EXTI_MODULE_ENABLED */ 44 /* #define HAL_FDCAN_MODULE_ENABLED */ 45 /* #define HAL_HCD_MODULE_ENABLED */ 46 /* #define HAL_I2C_MODULE_ENABLED */ 47 /* #define HAL_I2S_MODULE_ENABLED */ 48 /* #define HAL_IWDG_MODULE_ENABLED */ 49 /* #define HAL_IRDA_MODULE_ENABLED */ 50 /* #define HAL_LPTIM_MODULE_ENABLED */ 51 /* #define HAL_PCD_MODULE_ENABLED */ 52 /* #define HAL_RNG_MODULE_ENABLED */ 53 /* #define HAL_RTC_MODULE_ENABLED */ 54 /* #define HAL_SMARTCARD_MODULE_ENABLED */ 55 /* #define HAL_SMBUS_MODULE_ENABLED */ 56 /* #define HAL_SPI_MODULE_ENABLED */ 57 /* #define HAL_TIM_MODULE_ENABLED */ 58 #define HAL_UART_MODULE_ENABLED 59 /* #define HAL_USART_MODULE_ENABLED */ 60 /* #define HAL_WWDG_MODULE_ENABLED */ 61 #define HAL_GPIO_MODULE_ENABLED 62 #define HAL_EXTI_MODULE_ENABLED 63 #define HAL_DMA_MODULE_ENABLED 64 #define HAL_RCC_MODULE_ENABLED 65 #define HAL_FLASH_MODULE_ENABLED 66 #define HAL_PWR_MODULE_ENABLED 67 #define HAL_CORTEX_MODULE_ENABLED 68 69 /* ########################## Register Callbacks selection ############################## */ 70 /** 71 * @brief This is the list of modules where register callback can be used 72 */ 73 #define USE_HAL_ADC_REGISTER_CALLBACKS 0u 74 #define USE_HAL_CEC_REGISTER_CALLBACKS 0u 75 #define USE_HAL_COMP_REGISTER_CALLBACKS 0u 76 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u 77 #define USE_HAL_DAC_REGISTER_CALLBACKS 0u 78 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u 79 #define USE_HAL_HCD_REGISTER_CALLBACKS 0u 80 #define USE_HAL_I2C_REGISTER_CALLBACKS 0u 81 #define USE_HAL_I2S_REGISTER_CALLBACKS 0u 82 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u 83 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u 84 #define USE_HAL_PCD_REGISTER_CALLBACKS 0u 85 #define USE_HAL_RNG_REGISTER_CALLBACKS 0u 86 #define USE_HAL_RTC_REGISTER_CALLBACKS 0u 87 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u 88 #define USE_HAL_SPI_REGISTER_CALLBACKS 0u 89 #define USE_HAL_TIM_REGISTER_CALLBACKS 0u 90 #define USE_HAL_UART_REGISTER_CALLBACKS 0u 91 #define USE_HAL_USART_REGISTER_CALLBACKS 0u 92 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u 93 94 /* ########################## Oscillator Values adaptation ####################*/ 95 /** 96 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 97 * This value is used by the RCC HAL module to compute the system frequency 98 * (when HSE is used as system clock source, directly or through the PLL). 99 */ 100 #if !defined (HSE_VALUE) 101 #define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ 102 #endif /* HSE_VALUE */ 103 104 #if !defined (HSE_STARTUP_TIMEOUT) 105 #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ 106 #endif /* HSE_STARTUP_TIMEOUT */ 107 108 /** 109 * @brief Internal High Speed oscillator (HSI) value. 110 * This value is used by the RCC HAL module to compute the system frequency 111 * (when HSI is used as system clock source, directly or through the PLL). 112 */ 113 #if !defined (HSI_VALUE) 114 #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ 115 #endif /* HSI_VALUE */ 116 117 #if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) 118 /** 119 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. 120 * This internal oscillator is mainly dedicated to provide a high precision clock to 121 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 122 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 123 * which is subject to manufacturing process variations. 124 */ 125 #if !defined (HSI48_VALUE) 126 #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. 127 The real value my vary depending on manufacturing process variations.*/ 128 #endif /* HSI48_VALUE */ 129 #endif 130 131 /** 132 * @brief Internal Low Speed oscillator (LSI) value. 133 */ 134 #if !defined (LSI_VALUE) 135 #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ 136 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 137 The real value may vary depending on the variations 138 in voltage and temperature.*/ 139 /** 140 * @brief External Low Speed oscillator (LSE) value. 141 * This value is used by the UART, RTC HAL module to compute the system frequency 142 */ 143 #if !defined (LSE_VALUE) 144 #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ 145 #endif /* LSE_VALUE */ 146 147 #if !defined (LSE_STARTUP_TIMEOUT) 148 #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ 149 #endif /* LSE_STARTUP_TIMEOUT */ 150 151 /** 152 * @brief External clock source for I2S1 peripheral 153 * This value is used by the RCC HAL module to compute the I2S1 clock source 154 * frequency. 155 */ 156 #if !defined (EXTERNAL_I2S1_CLOCK_VALUE) 157 #define EXTERNAL_I2S1_CLOCK_VALUE (12288000UL) /*!< Value of the I2S1 External clock source in Hz*/ 158 #endif /* EXTERNAL_I2S1_CLOCK_VALUE */ 159 160 #if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) 161 /** 162 * @brief External clock source for I2S2 peripheral 163 * This value is used by the RCC HAL module to compute the I2S2 clock source 164 * frequency. 165 */ 166 #if !defined (EXTERNAL_I2S2_CLOCK_VALUE) 167 #define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/ 168 #endif /* EXTERNAL_I2S2_CLOCK_VALUE */ 169 #endif 170 171 /* Tip: To avoid modifying this file each time you need to use different HSE, 172 === you can define the HSE value in your toolchain compiler preprocessor. */ 173 174 /* ########################### System Configuration ######################### */ 175 /** 176 * @brief This is the HAL system configuration section 177 */ 178 #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ 179 #define TICK_INT_PRIORITY 3U /*!< tick interrupt priority */ 180 #define USE_RTOS 0U 181 #define PREFETCH_ENABLE 1U 182 #define INSTRUCTION_CACHE_ENABLE 1U 183 184 /* ################## SPI peripheral configuration ########################## */ 185 186 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 187 * Activated: CRC code is present inside driver 188 * Deactivated: CRC code cleaned from driver 189 */ 190 191 #define USE_SPI_CRC 0U 192 193 /* ################## CRYP peripheral configuration ########################## */ 194 195 #define USE_HAL_CRYP_SUSPEND_RESUME 1U 196 197 /* ########################## Assert Selection ############################## */ 198 /** 199 * @brief Uncomment the line below to expanse the "assert_param" macro in the 200 * HAL drivers code 201 */ 202 /* #define USE_FULL_ASSERT 1U */ 203 204 /* Includes ------------------------------------------------------------------*/ 205 /** 206 * @brief Include modules header file 207 */ 208 209 #ifdef HAL_RCC_MODULE_ENABLED 210 #include "stm32g0xx_hal_rcc.h" 211 #endif /* HAL_RCC_MODULE_ENABLED */ 212 213 #ifdef HAL_GPIO_MODULE_ENABLED 214 #include "stm32g0xx_hal_gpio.h" 215 #endif /* HAL_GPIO_MODULE_ENABLED */ 216 217 #ifdef HAL_DMA_MODULE_ENABLED 218 #include "stm32g0xx_hal_dma.h" 219 #endif /* HAL_DMA_MODULE_ENABLED */ 220 221 #ifdef HAL_CORTEX_MODULE_ENABLED 222 #include "stm32g0xx_hal_cortex.h" 223 #endif /* HAL_CORTEX_MODULE_ENABLED */ 224 225 #ifdef HAL_ADC_MODULE_ENABLED 226 #include "stm32g0xx_hal_adc.h" 227 #include "stm32g0xx_hal_adc_ex.h" 228 #endif /* HAL_ADC_MODULE_ENABLED */ 229 230 #ifdef HAL_CEC_MODULE_ENABLED 231 #include "stm32g0xx_hal_cec.h" 232 #endif /* HAL_CEC_MODULE_ENABLED */ 233 234 #ifdef HAL_COMP_MODULE_ENABLED 235 #include "stm32g0xx_hal_comp.h" 236 #endif /* HAL_COMP_MODULE_ENABLED */ 237 238 #ifdef HAL_CRC_MODULE_ENABLED 239 #include "stm32g0xx_hal_crc.h" 240 #endif /* HAL_CRC_MODULE_ENABLED */ 241 242 #ifdef HAL_CRYP_MODULE_ENABLED 243 #include "stm32g0xx_hal_cryp.h" 244 #endif /* HAL_CRYP_MODULE_ENABLED */ 245 246 #ifdef HAL_DAC_MODULE_ENABLED 247 #include "stm32g0xx_hal_dac.h" 248 #endif /* HAL_DAC_MODULE_ENABLED */ 249 250 #ifdef HAL_EXTI_MODULE_ENABLED 251 #include "stm32g0xx_hal_exti.h" 252 #endif /* HAL_EXTI_MODULE_ENABLED */ 253 254 #ifdef HAL_FLASH_MODULE_ENABLED 255 #include "stm32g0xx_hal_flash.h" 256 #endif /* HAL_FLASH_MODULE_ENABLED */ 257 258 #ifdef HAL_FDCAN_MODULE_ENABLED 259 #include "stm32g0xx_hal_fdcan.h" 260 #endif /* HAL_FDCAN_MODULE_ENABLED */ 261 262 #ifdef HAL_HCD_MODULE_ENABLED 263 #include "stm32g0xx_hal_hcd.h" 264 #endif /* HAL_HCD_MODULE_ENABLED */ 265 266 #ifdef HAL_I2C_MODULE_ENABLED 267 #include "stm32g0xx_hal_i2c.h" 268 #endif /* HAL_I2C_MODULE_ENABLED */ 269 270 #ifdef HAL_I2S_MODULE_ENABLED 271 #include "stm32g0xx_hal_i2s.h" 272 #endif /* HAL_I2S_MODULE_ENABLED */ 273 274 #ifdef HAL_IRDA_MODULE_ENABLED 275 #include "stm32g0xx_hal_irda.h" 276 #endif /* HAL_IRDA_MODULE_ENABLED */ 277 278 #ifdef HAL_IWDG_MODULE_ENABLED 279 #include "stm32g0xx_hal_iwdg.h" 280 #endif /* HAL_IWDG_MODULE_ENABLED */ 281 282 #ifdef HAL_LPTIM_MODULE_ENABLED 283 #include "stm32g0xx_hal_lptim.h" 284 #endif /* HAL_LPTIM_MODULE_ENABLED */ 285 286 #ifdef HAL_PCD_MODULE_ENABLED 287 #include "stm32g0xx_hal_pcd.h" 288 #endif /* HAL_PCD_MODULE_ENABLED */ 289 290 #ifdef HAL_PWR_MODULE_ENABLED 291 #include "stm32g0xx_hal_pwr.h" 292 #endif /* HAL_PWR_MODULE_ENABLED */ 293 294 #ifdef HAL_RNG_MODULE_ENABLED 295 #include "stm32g0xx_hal_rng.h" 296 #endif /* HAL_RNG_MODULE_ENABLED */ 297 298 #ifdef HAL_RTC_MODULE_ENABLED 299 #include "stm32g0xx_hal_rtc.h" 300 #endif /* HAL_RTC_MODULE_ENABLED */ 301 302 #ifdef HAL_SMARTCARD_MODULE_ENABLED 303 #include "stm32g0xx_hal_smartcard.h" 304 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 305 306 #ifdef HAL_SMBUS_MODULE_ENABLED 307 #include "stm32g0xx_hal_smbus.h" 308 #endif /* HAL_SMBUS_MODULE_ENABLED */ 309 310 #ifdef HAL_SPI_MODULE_ENABLED 311 #include "stm32g0xx_hal_spi.h" 312 #endif /* HAL_SPI_MODULE_ENABLED */ 313 314 #ifdef HAL_TIM_MODULE_ENABLED 315 #include "stm32g0xx_hal_tim.h" 316 #endif /* HAL_TIM_MODULE_ENABLED */ 317 318 #ifdef HAL_UART_MODULE_ENABLED 319 #include "stm32g0xx_hal_uart.h" 320 #endif /* HAL_UART_MODULE_ENABLED */ 321 322 #ifdef HAL_USART_MODULE_ENABLED 323 #include "stm32g0xx_hal_usart.h" 324 #endif /* HAL_USART_MODULE_ENABLED */ 325 326 #ifdef HAL_WWDG_MODULE_ENABLED 327 #include "stm32g0xx_hal_wwdg.h" 328 #endif /* HAL_WWDG_MODULE_ENABLED */ 329 330 /* Exported macro ------------------------------------------------------------*/ 331 #ifdef USE_FULL_ASSERT 332 /** 333 * @brief The assert_param macro is used for functions parameters check. 334 * @param expr If expr is false, it calls assert_failed function 335 * which reports the name of the source file and the source 336 * line number of the call that failed. 337 * If expr is true, it returns no value. 338 * @retval None 339 */ 340 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 341 /* Exported functions ------------------------------------------------------- */ 342 void assert_failed(uint8_t *file, uint32_t line); 343 #else 344 #define assert_param(expr) ((void)0U) 345 #endif /* USE_FULL_ASSERT */ 346 347 #ifdef __cplusplus 348 } 349 #endif 350 351 #endif /* STM32G0xx_HAL_CONF_H */ 352