1 /** 2 ****************************************************************************** 3 * @file stm32g0xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 ****************************************************************************** 7 * @attention 8 * 9 * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> 10 * 11 * Redistribution and use in source and binary forms, with or without modification, 12 * are permitted provided that the following conditions are met: 13 * 1. Redistributions of source code must retain the above copyright notice, 14 * this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright notice, 16 * this list of conditions and the following disclaimer in the documentation 17 * and/or other materials provided with the distribution. 18 * 3. Neither the name of STMicroelectronics nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 23 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 25 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 28 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 29 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 ****************************************************************************** 34 */ 35 36 /* Define to prevent recursive inclusion -------------------------------------*/ 37 #ifndef STM32G0xx_HAL_CONF_H 38 #define STM32G0xx_HAL_CONF_H 39 40 #ifdef __cplusplus 41 extern "C" { 42 #endif 43 44 /* Exported types ------------------------------------------------------------*/ 45 /* Exported constants --------------------------------------------------------*/ 46 47 /* ########################## Module Selection ############################## */ 48 /** 49 * @brief This is the list of modules to be used in the HAL driver 50 */ 51 #define HAL_MODULE_ENABLED 52 53 #define HAL_ADC_MODULE_ENABLED 54 /* #define HAL_CEC_MODULE_ENABLED */ 55 /* #define HAL_COMP_MODULE_ENABLED */ 56 /* #define HAL_CRC_MODULE_ENABLED */ 57 /* #define HAL_CRYP_MODULE_ENABLED */ 58 #define HAL_DAC_MODULE_ENABLED 59 /* #define HAL_EXTI_MODULE_ENABLED */ 60 /* #define HAL_I2C_MODULE_ENABLED */ 61 /* #define HAL_I2S_MODULE_ENABLED */ 62 #define HAL_IWDG_MODULE_ENABLED 63 /* #define HAL_IRDA_MODULE_ENABLED */ 64 /* #define HAL_LPTIM_MODULE_ENABLED */ 65 /* #define HAL_RNG_MODULE_ENABLED */ 66 /* #define HAL_RTC_MODULE_ENABLED */ 67 /* #define HAL_SMARTCARD_MODULE_ENABLED */ 68 /* #define HAL_SMBUS_MODULE_ENABLED */ 69 #define HAL_SPI_MODULE_ENABLED 70 #define HAL_TIM_MODULE_ENABLED 71 #define HAL_UART_MODULE_ENABLED 72 /* #define HAL_USART_MODULE_ENABLED */ 73 /* #define HAL_WWDG_MODULE_ENABLED */ 74 #define HAL_GPIO_MODULE_ENABLED 75 #define HAL_DMA_MODULE_ENABLED 76 #define HAL_RCC_MODULE_ENABLED 77 #define HAL_FLASH_MODULE_ENABLED 78 #define HAL_PWR_MODULE_ENABLED 79 #define HAL_CORTEX_MODULE_ENABLED 80 81 /* ########################## Register Callbacks selection ############################## */ 82 /** 83 * @brief This is the list of modules where register callback can be used 84 */ 85 #define USE_HAL_ADC_REGISTER_CALLBACKS 0u 86 #define USE_HAL_CEC_REGISTER_CALLBACKS 0u 87 #define USE_HAL_COMP_REGISTER_CALLBACKS 0u 88 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u 89 #define USE_HAL_DAC_REGISTER_CALLBACKS 0u 90 #define USE_HAL_I2C_REGISTER_CALLBACKS 0u 91 #define USE_HAL_I2S_REGISTER_CALLBACKS 0u 92 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u 93 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u 94 #define USE_HAL_RNG_REGISTER_CALLBACKS 0u 95 #define USE_HAL_RTC_REGISTER_CALLBACKS 0u 96 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u 97 #define USE_HAL_SPI_REGISTER_CALLBACKS 0u 98 #define USE_HAL_TIM_REGISTER_CALLBACKS 0u 99 #define USE_HAL_UART_REGISTER_CALLBACKS 0u 100 #define USE_HAL_USART_REGISTER_CALLBACKS 0u 101 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u 102 103 /* ########################## Oscillator Values adaptation ####################*/ 104 /** 105 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 106 * This value is used by the RCC HAL module to compute the system frequency 107 * (when HSE is used as system clock source, directly or through the PLL). 108 */ 109 #if !defined (HSE_VALUE) 110 #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ 111 #endif /* HSE_VALUE */ 112 113 #if !defined (HSE_STARTUP_TIMEOUT) 114 #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ 115 #endif /* HSE_STARTUP_TIMEOUT */ 116 117 /** 118 * @brief Internal High Speed oscillator (HSI) value. 119 * This value is used by the RCC HAL module to compute the system frequency 120 * (when HSI is used as system clock source, directly or through the PLL). 121 */ 122 #if !defined (HSI_VALUE) 123 #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ 124 #endif /* HSI_VALUE */ 125 126 /** 127 * @brief Internal Low Speed oscillator (LSI) value. 128 */ 129 #if !defined (LSI_VALUE) 130 #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ 131 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 132 The real value may vary depending on the variations 133 in voltage and temperature.*/ 134 /** 135 * @brief External Low Speed oscillator (LSE) value. 136 * This value is used by the UART, RTC HAL module to compute the system frequency 137 */ 138 #if !defined (LSE_VALUE) 139 #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ 140 #endif /* LSE_VALUE */ 141 142 #if !defined (LSE_STARTUP_TIMEOUT) 143 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ 144 #endif /* LSE_STARTUP_TIMEOUT */ 145 146 /** 147 * @brief External clock source for I2S1 peripheral 148 * This value is used by the RCC HAL module to compute the I2S1 clock source 149 * frequency. 150 */ 151 #if !defined (EXTERNAL_I2S1_CLOCK_VALUE) 152 #define EXTERNAL_I2S1_CLOCK_VALUE 12288000U /*!< Value of the I2S1 External clock source in Hz*/ 153 #endif /* EXTERNAL_I2S1_CLOCK_VALUE */ 154 155 /* Tip: To avoid modifying this file each time you need to use different HSE, 156 === you can define the HSE value in your toolchain compiler preprocessor. */ 157 158 /* ########################### System Configuration ######################### */ 159 /** 160 * @brief This is the HAL system configuration section 161 */ 162 #define VDD_VALUE 3300U /*!< Value of VDD in mv */ 163 #define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ 164 #define USE_RTOS 0U 165 #define PREFETCH_ENABLE 1U 166 #define INSTRUCTION_CACHE_ENABLE 1U 167 168 /* ################## SPI peripheral configuration ########################## */ 169 170 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 171 * Activated: CRC code is present inside driver 172 * Deactivated: CRC code cleaned from driver 173 */ 174 175 #define USE_SPI_CRC 0U 176 177 /* ################## CRYP peripheral configuration ########################## */ 178 179 #define USE_HAL_CRYP_SUSPEND_RESUME 1U 180 181 /* ########################## Assert Selection ############################## */ 182 /** 183 * @brief Uncomment the line below to expanse the "assert_param" macro in the 184 * HAL drivers code 185 */ 186 /* #define USE_FULL_ASSERT 1U */ 187 188 /* Includes ------------------------------------------------------------------*/ 189 /** 190 * @brief Include modules header file 191 */ 192 193 #ifdef HAL_RCC_MODULE_ENABLED 194 #include "stm32g0xx_hal_rcc.h" 195 #endif /* HAL_RCC_MODULE_ENABLED */ 196 197 #ifdef HAL_GPIO_MODULE_ENABLED 198 #include "stm32g0xx_hal_gpio.h" 199 #endif /* HAL_GPIO_MODULE_ENABLED */ 200 201 #ifdef HAL_DMA_MODULE_ENABLED 202 #include "stm32g0xx_hal_dma.h" 203 #endif /* HAL_DMA_MODULE_ENABLED */ 204 205 #ifdef HAL_CORTEX_MODULE_ENABLED 206 #include "stm32g0xx_hal_cortex.h" 207 #endif /* HAL_CORTEX_MODULE_ENABLED */ 208 209 #ifdef HAL_ADC_MODULE_ENABLED 210 #include "stm32g0xx_hal_adc.h" 211 #include "stm32g0xx_hal_adc_ex.h" 212 #endif /* HAL_ADC_MODULE_ENABLED */ 213 214 #ifdef HAL_CEC_MODULE_ENABLED 215 #include "stm32g0xx_hal_cec.h" 216 #endif /* HAL_CEC_MODULE_ENABLED */ 217 218 #ifdef HAL_COMP_MODULE_ENABLED 219 #include "stm32g0xx_hal_comp.h" 220 #endif /* HAL_COMP_MODULE_ENABLED */ 221 222 #ifdef HAL_CRC_MODULE_ENABLED 223 #include "stm32g0xx_hal_crc.h" 224 #endif /* HAL_CRC_MODULE_ENABLED */ 225 226 #ifdef HAL_CRYP_MODULE_ENABLED 227 #include "stm32g0xx_hal_cryp.h" 228 #endif /* HAL_CRYP_MODULE_ENABLED */ 229 230 #ifdef HAL_DAC_MODULE_ENABLED 231 #include "stm32g0xx_hal_dac.h" 232 #endif /* HAL_DAC_MODULE_ENABLED */ 233 234 #ifdef HAL_EXTI_MODULE_ENABLED 235 #include "stm32g0xx_hal_exti.h" 236 #endif /* HAL_EXTI_MODULE_ENABLED */ 237 238 #ifdef HAL_FLASH_MODULE_ENABLED 239 #include "stm32g0xx_hal_flash.h" 240 #endif /* HAL_FLASH_MODULE_ENABLED */ 241 242 #ifdef HAL_I2C_MODULE_ENABLED 243 #include "stm32g0xx_hal_i2c.h" 244 #endif /* HAL_I2C_MODULE_ENABLED */ 245 246 #ifdef HAL_I2S_MODULE_ENABLED 247 #include "stm32g0xx_hal_i2s.h" 248 #endif /* HAL_I2S_MODULE_ENABLED */ 249 250 #ifdef HAL_IRDA_MODULE_ENABLED 251 #include "stm32g0xx_hal_irda.h" 252 #endif /* HAL_IRDA_MODULE_ENABLED */ 253 254 #ifdef HAL_IWDG_MODULE_ENABLED 255 #include "stm32g0xx_hal_iwdg.h" 256 #endif /* HAL_IWDG_MODULE_ENABLED */ 257 258 #ifdef HAL_LPTIM_MODULE_ENABLED 259 #include "stm32g0xx_hal_lptim.h" 260 #endif /* HAL_LPTIM_MODULE_ENABLED */ 261 262 #ifdef HAL_PWR_MODULE_ENABLED 263 #include "stm32g0xx_hal_pwr.h" 264 #endif /* HAL_PWR_MODULE_ENABLED */ 265 266 #ifdef HAL_RNG_MODULE_ENABLED 267 #include "stm32g0xx_hal_rng.h" 268 #endif /* HAL_RNG_MODULE_ENABLED */ 269 270 #ifdef HAL_RTC_MODULE_ENABLED 271 #include "stm32g0xx_hal_rtc.h" 272 #endif /* HAL_RTC_MODULE_ENABLED */ 273 274 #ifdef HAL_SMARTCARD_MODULE_ENABLED 275 #include "stm32g0xx_hal_smartcard.h" 276 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 277 278 #ifdef HAL_SMBUS_MODULE_ENABLED 279 #include "stm32g0xx_hal_smbus.h" 280 #endif /* HAL_SMBUS_MODULE_ENABLED */ 281 282 #ifdef HAL_SPI_MODULE_ENABLED 283 #include "stm32g0xx_hal_spi.h" 284 #endif /* HAL_SPI_MODULE_ENABLED */ 285 286 #ifdef HAL_TIM_MODULE_ENABLED 287 #include "stm32g0xx_hal_tim.h" 288 #endif /* HAL_TIM_MODULE_ENABLED */ 289 290 #ifdef HAL_UART_MODULE_ENABLED 291 #include "stm32g0xx_hal_uart.h" 292 #endif /* HAL_UART_MODULE_ENABLED */ 293 294 #ifdef HAL_USART_MODULE_ENABLED 295 #include "stm32g0xx_hal_usart.h" 296 #endif /* HAL_USART_MODULE_ENABLED */ 297 298 #ifdef HAL_WWDG_MODULE_ENABLED 299 #include "stm32g0xx_hal_wwdg.h" 300 #endif /* HAL_WWDG_MODULE_ENABLED */ 301 302 /* Exported macro ------------------------------------------------------------*/ 303 #ifdef USE_FULL_ASSERT 304 /** 305 * @brief The assert_param macro is used for functions parameters check. 306 * @param expr If expr is false, it calls assert_failed function 307 * which reports the name of the source file and the source 308 * line number of the call that failed. 309 * If expr is true, it returns no value. 310 * @retval None 311 */ 312 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 313 /* Exported functions ------------------------------------------------------- */ 314 void assert_failed(uint8_t *file, uint32_t line); 315 #else 316 #define assert_param(expr) ((void)0U) 317 #endif /* USE_FULL_ASSERT */ 318 319 #ifdef __cplusplus 320 } 321 #endif 322 323 #endif /* STM32G0xx_HAL_CONF_H */ 324 325 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 326