1 /** 2 ****************************************************************************** 3 * @file stm32g4xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration file 6 ****************************************************************************** 7 * @attention 8 * 9 * <h2><center>© Copyright (c) 2018 STMicroelectronics. 10 * All rights reserved.</center></h2> 11 * 12 * This software component is licensed by ST under BSD 3-Clause license, 13 * the "License"; You may not use this file except in compliance with the 14 * License. You may obtain a copy of the License at: 15 * opensource.org/licenses/BSD-3-Clause 16 * 17 ****************************************************************************** 18 */ 19 20 /* Define to prevent recursive inclusion -------------------------------------*/ 21 #ifndef STM32G4xx_HAL_CONF_H 22 #define STM32G4xx_HAL_CONF_H 23 24 #ifdef __cplusplus 25 extern "C" { 26 #endif 27 28 /* Exported types ------------------------------------------------------------*/ 29 /* Exported constants --------------------------------------------------------*/ 30 31 /* ########################## Module Selection ############################## */ 32 /** 33 * @brief This is the list of modules to be used in the HAL driver 34 */ 35 36 #define HAL_MODULE_ENABLED 37 38 /*#define HAL_ADC_MODULE_ENABLED */ 39 /*#define HAL_COMP_MODULE_ENABLED */ 40 /*#define HAL_CORDIC_MODULE_ENABLED */ 41 /*#define HAL_CRC_MODULE_ENABLED */ 42 /*#define HAL_CRYP_MODULE_ENABLED */ 43 /*#define HAL_DAC_MODULE_ENABLED */ 44 /*#define HAL_FDCAN_MODULE_ENABLED */ 45 /*#define HAL_FMAC_MODULE_ENABLED */ 46 /*#define HAL_HRTIM_MODULE_ENABLED */ 47 /*#define HAL_IRDA_MODULE_ENABLED */ 48 /*#define HAL_IWDG_MODULE_ENABLED */ 49 /*#define HAL_I2C_MODULE_ENABLED */ 50 /*#define HAL_I2S_MODULE_ENABLED */ 51 /*#define HAL_LPTIM_MODULE_ENABLED */ 52 /*#define HAL_NAND_MODULE_ENABLED */ 53 /*#define HAL_NOR_MODULE_ENABLED */ 54 /*#define HAL_OPAMP_MODULE_ENABLED */ 55 /*#define HAL_PCD_MODULE_ENABLED */ 56 /*#define HAL_QSPI_MODULE_ENABLED */ 57 /*#define HAL_RNG_MODULE_ENABLED */ 58 /*#define HAL_RTC_MODULE_ENABLED */ 59 /*#define HAL_SAI_MODULE_ENABLED */ 60 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 61 /*#define HAL_SMBUS_MODULE_ENABLED */ 62 /*#define HAL_SPI_MODULE_ENABLED */ 63 /*#define HAL_SRAM_MODULE_ENABLED */ 64 /*#define HAL_TIM_MODULE_ENABLED */ 65 #define HAL_UART_MODULE_ENABLED 66 /*#define HAL_USART_MODULE_ENABLED */ 67 /*#define HAL_WWDG_MODULE_ENABLED */ 68 #define HAL_GPIO_MODULE_ENABLED 69 #define HAL_EXTI_MODULE_ENABLED 70 #define HAL_DMA_MODULE_ENABLED 71 #define HAL_RCC_MODULE_ENABLED 72 #define HAL_FLASH_MODULE_ENABLED 73 #define HAL_PWR_MODULE_ENABLED 74 #define HAL_CORTEX_MODULE_ENABLED 75 76 /* ########################## Register Callbacks selection ############################## */ 77 /** 78 * @brief This is the list of modules where register callback can be used 79 */ 80 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 81 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 82 #define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U 83 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U 84 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 85 #define USE_HAL_EXTI_REGISTER_CALLBACKS 0U 86 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U 87 #define USE_HAL_FMAC_REGISTER_CALLBACKS 0U 88 #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U 89 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 90 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U 91 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 92 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U 93 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U 94 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U 95 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 96 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 97 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U 98 #define USE_HAL_RNG_REGISTER_CALLBACKS 0U 99 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 100 #define USE_HAL_SAI_REGISTER_CALLBACKS 0U 101 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 102 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U 103 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 104 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U 105 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 106 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 107 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 108 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 109 110 /* ########################## Oscillator Values adaptation ####################*/ 111 /** 112 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 113 * This value is used by the RCC HAL module to compute the system frequency 114 * (when HSE is used as system clock source, directly or through the PLL). 115 */ 116 #if !defined (HSE_VALUE) 117 #define HSE_VALUE (24000000UL) /*!< Value of the External oscillator in Hz */ 118 #endif /* HSE_VALUE */ 119 120 #if !defined (HSE_STARTUP_TIMEOUT) 121 #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ 122 #endif /* HSE_STARTUP_TIMEOUT */ 123 124 /** 125 * @brief Internal High Speed oscillator (HSI) value. 126 * This value is used by the RCC HAL module to compute the system frequency 127 * (when HSI is used as system clock source, directly or through the PLL). 128 */ 129 #if !defined (HSI_VALUE) 130 #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ 131 #endif /* HSI_VALUE */ 132 133 /** 134 * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG. 135 * This internal oscillator is mainly dedicated to provide a high precision clock to 136 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 137 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 138 * which is subject to manufacturing process variations. 139 */ 140 #if !defined (HSI48_VALUE) 141 #define HSI48_VALUE (48000000UL) /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz. 142 The real value my vary depending on manufacturing process variations.*/ 143 #endif /* HSI48_VALUE */ 144 145 /** 146 * @brief Internal Low Speed oscillator (LSI) value. 147 */ 148 #if !defined (LSI_VALUE) 149 /*!< Value of the Internal Low Speed oscillator in Hz 150 The real value may vary depending on the variations in voltage and temperature.*/ 151 #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ 152 #endif /* LSI_VALUE */ 153 /** 154 * @brief External Low Speed oscillator (LSE) value. 155 * This value is used by the UART, RTC HAL module to compute the system frequency 156 */ 157 #if !defined (LSE_VALUE) 158 #define LSE_VALUE (32768UL) /*!< Value of the External Low Speed oscillator in Hz */ 159 #endif /* LSE_VALUE */ 160 161 #if !defined (LSE_STARTUP_TIMEOUT) 162 #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ 163 #endif /* LSE_STARTUP_TIMEOUT */ 164 165 /** 166 * @brief External clock source for I2S and SAI peripherals 167 * This value is used by the I2S and SAI HAL modules to compute the I2S and SAI clock source 168 * frequency, this source is inserted directly through I2S_CKIN pad. 169 */ 170 #if !defined (EXTERNAL_CLOCK_VALUE) 171 #define EXTERNAL_CLOCK_VALUE (12288000UL) /*!< Value of the External oscillator in Hz*/ 172 #endif /* EXTERNAL_CLOCK_VALUE */ 173 174 /* Tip: To avoid modifying this file each time you need to use different HSE, 175 === you can define the HSE value in your toolchain compiler preprocessor. */ 176 177 /* ########################### System Configuration ######################### */ 178 /** 179 * @brief This is the HAL system configuration section 180 */ 181 182 #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ 183 #define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ 184 #define USE_RTOS 0U 185 #define PREFETCH_ENABLE 0U 186 #define INSTRUCTION_CACHE_ENABLE 1U 187 #define DATA_CACHE_ENABLE 1U 188 189 /* ########################## Assert Selection ############################## */ 190 /** 191 * @brief Uncomment the line below to expanse the "assert_param" macro in the 192 * HAL drivers code 193 */ 194 /* #define USE_FULL_ASSERT 1U */ 195 196 /* ################## SPI peripheral configuration ########################## */ 197 198 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 199 * Activated: CRC code is present inside driver 200 * Deactivated: CRC code cleaned from driver 201 */ 202 203 #define USE_SPI_CRC 0U 204 205 /* Includes ------------------------------------------------------------------*/ 206 /** 207 * @brief Include module's header file 208 */ 209 210 #ifdef HAL_RCC_MODULE_ENABLED 211 #include "stm32g4xx_hal_rcc.h" 212 #endif /* HAL_RCC_MODULE_ENABLED */ 213 214 #ifdef HAL_GPIO_MODULE_ENABLED 215 #include "stm32g4xx_hal_gpio.h" 216 #endif /* HAL_GPIO_MODULE_ENABLED */ 217 218 #ifdef HAL_DMA_MODULE_ENABLED 219 #include "stm32g4xx_hal_dma.h" 220 #endif /* HAL_DMA_MODULE_ENABLED */ 221 222 #ifdef HAL_CORTEX_MODULE_ENABLED 223 #include "stm32g4xx_hal_cortex.h" 224 #endif /* HAL_CORTEX_MODULE_ENABLED */ 225 226 #ifdef HAL_ADC_MODULE_ENABLED 227 #include "stm32g4xx_hal_adc.h" 228 #endif /* HAL_ADC_MODULE_ENABLED */ 229 230 #ifdef HAL_COMP_MODULE_ENABLED 231 #include "stm32g4xx_hal_comp.h" 232 #endif /* HAL_COMP_MODULE_ENABLED */ 233 234 #ifdef HAL_CORDIC_MODULE_ENABLED 235 #include "stm32g4xx_hal_cordic.h" 236 #endif /* HAL_CORDIC_MODULE_ENABLED */ 237 238 #ifdef HAL_CRC_MODULE_ENABLED 239 #include "stm32g4xx_hal_crc.h" 240 #endif /* HAL_CRC_MODULE_ENABLED */ 241 242 #ifdef HAL_CRYP_MODULE_ENABLED 243 #include "stm32g4xx_hal_cryp.h" 244 #endif /* HAL_CRYP_MODULE_ENABLED */ 245 246 #ifdef HAL_DAC_MODULE_ENABLED 247 #include "stm32g4xx_hal_dac.h" 248 #endif /* HAL_DAC_MODULE_ENABLED */ 249 250 #ifdef HAL_EXTI_MODULE_ENABLED 251 #include "stm32g4xx_hal_exti.h" 252 #endif /* HAL_EXTI_MODULE_ENABLED */ 253 254 #ifdef HAL_FDCAN_MODULE_ENABLED 255 #include "stm32g4xx_hal_fdcan.h" 256 #endif /* HAL_FDCAN_MODULE_ENABLED */ 257 258 #ifdef HAL_FLASH_MODULE_ENABLED 259 #include "stm32g4xx_hal_flash.h" 260 #endif /* HAL_FLASH_MODULE_ENABLED */ 261 262 #ifdef HAL_FMAC_MODULE_ENABLED 263 #include "stm32g4xx_hal_fmac.h" 264 #endif /* HAL_FMAC_MODULE_ENABLED */ 265 266 #ifdef HAL_HRTIM_MODULE_ENABLED 267 #include "stm32g4xx_hal_hrtim.h" 268 #endif /* HAL_HRTIM_MODULE_ENABLED */ 269 270 #ifdef HAL_IRDA_MODULE_ENABLED 271 #include "stm32g4xx_hal_irda.h" 272 #endif /* HAL_IRDA_MODULE_ENABLED */ 273 274 #ifdef HAL_IWDG_MODULE_ENABLED 275 #include "stm32g4xx_hal_iwdg.h" 276 #endif /* HAL_IWDG_MODULE_ENABLED */ 277 278 #ifdef HAL_I2C_MODULE_ENABLED 279 #include "stm32g4xx_hal_i2c.h" 280 #endif /* HAL_I2C_MODULE_ENABLED */ 281 282 #ifdef HAL_I2S_MODULE_ENABLED 283 #include "stm32g4xx_hal_i2s.h" 284 #endif /* HAL_I2S_MODULE_ENABLED */ 285 286 #ifdef HAL_LPTIM_MODULE_ENABLED 287 #include "stm32g4xx_hal_lptim.h" 288 #endif /* HAL_LPTIM_MODULE_ENABLED */ 289 290 #ifdef HAL_NAND_MODULE_ENABLED 291 #include "stm32g4xx_hal_nand.h" 292 #endif /* HAL_NAND_MODULE_ENABLED */ 293 294 #ifdef HAL_NOR_MODULE_ENABLED 295 #include "stm32g4xx_hal_nor.h" 296 #endif /* HAL_NOR_MODULE_ENABLED */ 297 298 #ifdef HAL_OPAMP_MODULE_ENABLED 299 #include "stm32g4xx_hal_opamp.h" 300 #endif /* HAL_OPAMP_MODULE_ENABLED */ 301 302 #ifdef HAL_PCD_MODULE_ENABLED 303 #include "stm32g4xx_hal_pcd.h" 304 #endif /* HAL_PCD_MODULE_ENABLED */ 305 306 #ifdef HAL_PWR_MODULE_ENABLED 307 #include "stm32g4xx_hal_pwr.h" 308 #endif /* HAL_PWR_MODULE_ENABLED */ 309 310 #ifdef HAL_QSPI_MODULE_ENABLED 311 #include "stm32g4xx_hal_qspi.h" 312 #endif /* HAL_QSPI_MODULE_ENABLED */ 313 314 #ifdef HAL_RNG_MODULE_ENABLED 315 #include "stm32g4xx_hal_rng.h" 316 #endif /* HAL_RNG_MODULE_ENABLED */ 317 318 #ifdef HAL_RTC_MODULE_ENABLED 319 #include "stm32g4xx_hal_rtc.h" 320 #endif /* HAL_RTC_MODULE_ENABLED */ 321 322 #ifdef HAL_SAI_MODULE_ENABLED 323 #include "stm32g4xx_hal_sai.h" 324 #endif /* HAL_SAI_MODULE_ENABLED */ 325 326 #ifdef HAL_SMARTCARD_MODULE_ENABLED 327 #include "stm32g4xx_hal_smartcard.h" 328 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 329 330 #ifdef HAL_SMBUS_MODULE_ENABLED 331 #include "stm32g4xx_hal_smbus.h" 332 #endif /* HAL_SMBUS_MODULE_ENABLED */ 333 334 #ifdef HAL_SPI_MODULE_ENABLED 335 #include "stm32g4xx_hal_spi.h" 336 #endif /* HAL_SPI_MODULE_ENABLED */ 337 338 #ifdef HAL_SRAM_MODULE_ENABLED 339 #include "stm32g4xx_hal_sram.h" 340 #endif /* HAL_SRAM_MODULE_ENABLED */ 341 342 #ifdef HAL_TIM_MODULE_ENABLED 343 #include "stm32g4xx_hal_tim.h" 344 #endif /* HAL_TIM_MODULE_ENABLED */ 345 346 #ifdef HAL_UART_MODULE_ENABLED 347 #include "stm32g4xx_hal_uart.h" 348 #endif /* HAL_UART_MODULE_ENABLED */ 349 350 #ifdef HAL_USART_MODULE_ENABLED 351 #include "stm32g4xx_hal_usart.h" 352 #endif /* HAL_USART_MODULE_ENABLED */ 353 354 #ifdef HAL_WWDG_MODULE_ENABLED 355 #include "stm32g4xx_hal_wwdg.h" 356 #endif /* HAL_WWDG_MODULE_ENABLED */ 357 358 /* Exported macro ------------------------------------------------------------*/ 359 #ifdef USE_FULL_ASSERT 360 /** 361 * @brief The assert_param macro is used for function's parameters check. 362 * @param expr: If expr is false, it calls assert_failed function 363 * which reports the name of the source file and the source 364 * line number of the call that failed. 365 * If expr is true, it returns no value. 366 * @retval None 367 */ 368 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 369 /* Exported functions ------------------------------------------------------- */ 370 void assert_failed(uint8_t *file, uint32_t line); 371 #else 372 #define assert_param(expr) ((void)0U) 373 #endif /* USE_FULL_ASSERT */ 374 375 #ifdef __cplusplus 376 } 377 #endif 378 379 #endif /* STM32G4xx_HAL_CONF_H */ 380 381 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 382