1 /* USER CODE BEGIN Header */ 2 /** 3 ****************************************************************************** 4 * @file stm32g4xx_hal_conf.h 5 * @author MCD Application Team 6 * @brief HAL configuration file 7 ****************************************************************************** 8 * @attention 9 * 10 * Copyright (c) 2019 STMicroelectronics. 11 * All rights reserved. 12 * 13 * This software is licensed under terms that can be found in the LICENSE file 14 * in the root directory of this software component. 15 * If no LICENSE file comes with this software, it is provided AS-IS. 16 * 17 ****************************************************************************** 18 */ 19 /* USER CODE END Header */ 20 21 /* Define to prevent recursive inclusion -------------------------------------*/ 22 #ifndef STM32G4xx_HAL_CONF_H 23 #define STM32G4xx_HAL_CONF_H 24 25 #ifdef __cplusplus 26 extern "C" { 27 #endif 28 29 /* Exported types ------------------------------------------------------------*/ 30 /* Exported constants --------------------------------------------------------*/ 31 32 /* ########################## Module Selection ############################## */ 33 /** 34 * @brief This is the list of modules to be used in the HAL driver 35 */ 36 37 #define HAL_MODULE_ENABLED 38 39 #define HAL_ADC_MODULE_ENABLED 40 /*#define HAL_COMP_MODULE_ENABLED */ 41 /*#define HAL_CORDIC_MODULE_ENABLED */ 42 /*#define HAL_CRC_MODULE_ENABLED */ 43 /*#define HAL_CRYP_MODULE_ENABLED */ 44 /*#define HAL_DAC_MODULE_ENABLED */ 45 /*#define HAL_FDCAN_MODULE_ENABLED */ 46 /*#define HAL_FMAC_MODULE_ENABLED */ 47 /*#define HAL_HRTIM_MODULE_ENABLED */ 48 /*#define HAL_IRDA_MODULE_ENABLED */ 49 /*#define HAL_IWDG_MODULE_ENABLED */ 50 /*#define HAL_I2C_MODULE_ENABLED */ 51 /*#define HAL_I2S_MODULE_ENABLED */ 52 /*#define HAL_LPTIM_MODULE_ENABLED */ 53 /*#define HAL_NAND_MODULE_ENABLED */ 54 /*#define HAL_NOR_MODULE_ENABLED */ 55 /*#define HAL_OPAMP_MODULE_ENABLED */ 56 /*#define HAL_PCD_MODULE_ENABLED */ 57 /*#define HAL_QSPI_MODULE_ENABLED */ 58 /*#define HAL_RNG_MODULE_ENABLED */ 59 /*#define HAL_RTC_MODULE_ENABLED */ 60 /*#define HAL_SAI_MODULE_ENABLED */ 61 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 62 /*#define HAL_SMBUS_MODULE_ENABLED */ 63 #define HAL_SPI_MODULE_ENABLED 64 /*#define HAL_SRAM_MODULE_ENABLED */ 65 #define HAL_TIM_MODULE_ENABLED 66 #define HAL_UART_MODULE_ENABLED 67 /*#define HAL_USART_MODULE_ENABLED */ 68 /*#define HAL_WWDG_MODULE_ENABLED */ 69 #define HAL_GPIO_MODULE_ENABLED 70 #define HAL_EXTI_MODULE_ENABLED 71 #define HAL_DMA_MODULE_ENABLED 72 #define HAL_RCC_MODULE_ENABLED 73 #define HAL_FLASH_MODULE_ENABLED 74 #define HAL_PWR_MODULE_ENABLED 75 #define HAL_CORTEX_MODULE_ENABLED 76 77 /* ########################## Register Callbacks selection ############################## */ 78 /** 79 * @brief This is the list of modules where register callback can be used 80 */ 81 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 82 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 83 #define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U 84 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U 85 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 86 #define USE_HAL_EXTI_REGISTER_CALLBACKS 0U 87 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U 88 #define USE_HAL_FMAC_REGISTER_CALLBACKS 0U 89 #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U 90 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 91 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U 92 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 93 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U 94 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U 95 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U 96 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 97 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 98 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U 99 #define USE_HAL_RNG_REGISTER_CALLBACKS 0U 100 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 101 #define USE_HAL_SAI_REGISTER_CALLBACKS 0U 102 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 103 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U 104 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 105 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U 106 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 107 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 108 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 109 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 110 111 /* ########################## Oscillator Values adaptation ####################*/ 112 /** 113 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 114 * This value is used by the RCC HAL module to compute the system frequency 115 * (when HSE is used as system clock source, directly or through the PLL). 116 */ 117 #if !defined (HSE_VALUE) 118 #define HSE_VALUE (24000000UL) /*!< Value of the External oscillator in Hz */ 119 #endif /* HSE_VALUE */ 120 121 #if !defined (HSE_STARTUP_TIMEOUT) 122 #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ 123 #endif /* HSE_STARTUP_TIMEOUT */ 124 125 /** 126 * @brief Internal High Speed oscillator (HSI) value. 127 * This value is used by the RCC HAL module to compute the system frequency 128 * (when HSI is used as system clock source, directly or through the PLL). 129 */ 130 #if !defined (HSI_VALUE) 131 #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ 132 #endif /* HSI_VALUE */ 133 134 /** 135 * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG. 136 * This internal oscillator is mainly dedicated to provide a high precision clock to 137 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 138 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 139 * which is subject to manufacturing process variations. 140 */ 141 #if !defined (HSI48_VALUE) 142 #define HSI48_VALUE (48000000UL) /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz. 143 The real value my vary depending on manufacturing process variations.*/ 144 #endif /* HSI48_VALUE */ 145 146 /** 147 * @brief Internal Low Speed oscillator (LSI) value. 148 */ 149 #if !defined (LSI_VALUE) 150 /*!< Value of the Internal Low Speed oscillator in Hz 151 The real value may vary depending on the variations in voltage and temperature.*/ 152 #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ 153 #endif /* LSI_VALUE */ 154 /** 155 * @brief External Low Speed oscillator (LSE) value. 156 * This value is used by the UART, RTC HAL module to compute the system frequency 157 */ 158 #if !defined (LSE_VALUE) 159 #define LSE_VALUE (32768UL) /*!< Value of the External Low Speed oscillator in Hz */ 160 #endif /* LSE_VALUE */ 161 162 #if !defined (LSE_STARTUP_TIMEOUT) 163 #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ 164 #endif /* LSE_STARTUP_TIMEOUT */ 165 166 /** 167 * @brief External clock source for I2S and SAI peripherals 168 * This value is used by the I2S and SAI HAL modules to compute the I2S and SAI clock source 169 * frequency, this source is inserted directly through I2S_CKIN pad. 170 */ 171 #if !defined (EXTERNAL_CLOCK_VALUE) 172 #define EXTERNAL_CLOCK_VALUE (12288000UL) /*!< Value of the External oscillator in Hz*/ 173 #endif /* EXTERNAL_CLOCK_VALUE */ 174 175 /* Tip: To avoid modifying this file each time you need to use different HSE, 176 === you can define the HSE value in your toolchain compiler preprocessor. */ 177 178 /* ########################### System Configuration ######################### */ 179 /** 180 * @brief This is the HAL system configuration section 181 */ 182 183 #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ 184 #define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ 185 #define USE_RTOS 0U 186 #define PREFETCH_ENABLE 0U 187 #define INSTRUCTION_CACHE_ENABLE 1U 188 #define DATA_CACHE_ENABLE 1U 189 190 /* ########################## Assert Selection ############################## */ 191 /** 192 * @brief Uncomment the line below to expanse the "assert_param" macro in the 193 * HAL drivers code 194 */ 195 /* #define USE_FULL_ASSERT 1U */ 196 197 /* ################## SPI peripheral configuration ########################## */ 198 199 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 200 * Activated: CRC code is present inside driver 201 * Deactivated: CRC code cleaned from driver 202 */ 203 204 #define USE_SPI_CRC 0U 205 206 /* Includes ------------------------------------------------------------------*/ 207 /** 208 * @brief Include module's header file 209 */ 210 211 #ifdef HAL_RCC_MODULE_ENABLED 212 #include "stm32g4xx_hal_rcc.h" 213 #endif /* HAL_RCC_MODULE_ENABLED */ 214 215 #ifdef HAL_GPIO_MODULE_ENABLED 216 #include "stm32g4xx_hal_gpio.h" 217 #endif /* HAL_GPIO_MODULE_ENABLED */ 218 219 #ifdef HAL_DMA_MODULE_ENABLED 220 #include "stm32g4xx_hal_dma.h" 221 #endif /* HAL_DMA_MODULE_ENABLED */ 222 223 #ifdef HAL_CORTEX_MODULE_ENABLED 224 #include "stm32g4xx_hal_cortex.h" 225 #endif /* HAL_CORTEX_MODULE_ENABLED */ 226 227 #ifdef HAL_ADC_MODULE_ENABLED 228 #include "stm32g4xx_hal_adc.h" 229 #endif /* HAL_ADC_MODULE_ENABLED */ 230 231 #ifdef HAL_COMP_MODULE_ENABLED 232 #include "stm32g4xx_hal_comp.h" 233 #endif /* HAL_COMP_MODULE_ENABLED */ 234 235 #ifdef HAL_CORDIC_MODULE_ENABLED 236 #include "stm32g4xx_hal_cordic.h" 237 #endif /* HAL_CORDIC_MODULE_ENABLED */ 238 239 #ifdef HAL_CRC_MODULE_ENABLED 240 #include "stm32g4xx_hal_crc.h" 241 #endif /* HAL_CRC_MODULE_ENABLED */ 242 243 #ifdef HAL_CRYP_MODULE_ENABLED 244 #include "stm32g4xx_hal_cryp.h" 245 #endif /* HAL_CRYP_MODULE_ENABLED */ 246 247 #ifdef HAL_DAC_MODULE_ENABLED 248 #include "stm32g4xx_hal_dac.h" 249 #endif /* HAL_DAC_MODULE_ENABLED */ 250 251 #ifdef HAL_EXTI_MODULE_ENABLED 252 #include "stm32g4xx_hal_exti.h" 253 #endif /* HAL_EXTI_MODULE_ENABLED */ 254 255 #ifdef HAL_FDCAN_MODULE_ENABLED 256 #include "stm32g4xx_hal_fdcan.h" 257 #endif /* HAL_FDCAN_MODULE_ENABLED */ 258 259 #ifdef HAL_FLASH_MODULE_ENABLED 260 #include "stm32g4xx_hal_flash.h" 261 #endif /* HAL_FLASH_MODULE_ENABLED */ 262 263 #ifdef HAL_FMAC_MODULE_ENABLED 264 #include "stm32g4xx_hal_fmac.h" 265 #endif /* HAL_FMAC_MODULE_ENABLED */ 266 267 #ifdef HAL_HRTIM_MODULE_ENABLED 268 #include "stm32g4xx_hal_hrtim.h" 269 #endif /* HAL_HRTIM_MODULE_ENABLED */ 270 271 #ifdef HAL_IRDA_MODULE_ENABLED 272 #include "stm32g4xx_hal_irda.h" 273 #endif /* HAL_IRDA_MODULE_ENABLED */ 274 275 #ifdef HAL_IWDG_MODULE_ENABLED 276 #include "stm32g4xx_hal_iwdg.h" 277 #endif /* HAL_IWDG_MODULE_ENABLED */ 278 279 #ifdef HAL_I2C_MODULE_ENABLED 280 #include "stm32g4xx_hal_i2c.h" 281 #endif /* HAL_I2C_MODULE_ENABLED */ 282 283 #ifdef HAL_I2S_MODULE_ENABLED 284 #include "stm32g4xx_hal_i2s.h" 285 #endif /* HAL_I2S_MODULE_ENABLED */ 286 287 #ifdef HAL_LPTIM_MODULE_ENABLED 288 #include "stm32g4xx_hal_lptim.h" 289 #endif /* HAL_LPTIM_MODULE_ENABLED */ 290 291 #ifdef HAL_NAND_MODULE_ENABLED 292 #include "stm32g4xx_hal_nand.h" 293 #endif /* HAL_NAND_MODULE_ENABLED */ 294 295 #ifdef HAL_NOR_MODULE_ENABLED 296 #include "stm32g4xx_hal_nor.h" 297 #endif /* HAL_NOR_MODULE_ENABLED */ 298 299 #ifdef HAL_OPAMP_MODULE_ENABLED 300 #include "stm32g4xx_hal_opamp.h" 301 #endif /* HAL_OPAMP_MODULE_ENABLED */ 302 303 #ifdef HAL_PCD_MODULE_ENABLED 304 #include "stm32g4xx_hal_pcd.h" 305 #endif /* HAL_PCD_MODULE_ENABLED */ 306 307 #ifdef HAL_PWR_MODULE_ENABLED 308 #include "stm32g4xx_hal_pwr.h" 309 #endif /* HAL_PWR_MODULE_ENABLED */ 310 311 #ifdef HAL_QSPI_MODULE_ENABLED 312 #include "stm32g4xx_hal_qspi.h" 313 #endif /* HAL_QSPI_MODULE_ENABLED */ 314 315 #ifdef HAL_RNG_MODULE_ENABLED 316 #include "stm32g4xx_hal_rng.h" 317 #endif /* HAL_RNG_MODULE_ENABLED */ 318 319 #ifdef HAL_RTC_MODULE_ENABLED 320 #include "stm32g4xx_hal_rtc.h" 321 #endif /* HAL_RTC_MODULE_ENABLED */ 322 323 #ifdef HAL_SAI_MODULE_ENABLED 324 #include "stm32g4xx_hal_sai.h" 325 #endif /* HAL_SAI_MODULE_ENABLED */ 326 327 #ifdef HAL_SMARTCARD_MODULE_ENABLED 328 #include "stm32g4xx_hal_smartcard.h" 329 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 330 331 #ifdef HAL_SMBUS_MODULE_ENABLED 332 #include "stm32g4xx_hal_smbus.h" 333 #endif /* HAL_SMBUS_MODULE_ENABLED */ 334 335 #ifdef HAL_SPI_MODULE_ENABLED 336 #include "stm32g4xx_hal_spi.h" 337 #endif /* HAL_SPI_MODULE_ENABLED */ 338 339 #ifdef HAL_SRAM_MODULE_ENABLED 340 #include "stm32g4xx_hal_sram.h" 341 #endif /* HAL_SRAM_MODULE_ENABLED */ 342 343 #ifdef HAL_TIM_MODULE_ENABLED 344 #include "stm32g4xx_hal_tim.h" 345 #endif /* HAL_TIM_MODULE_ENABLED */ 346 347 #ifdef HAL_UART_MODULE_ENABLED 348 #include "stm32g4xx_hal_uart.h" 349 #endif /* HAL_UART_MODULE_ENABLED */ 350 351 #ifdef HAL_USART_MODULE_ENABLED 352 #include "stm32g4xx_hal_usart.h" 353 #endif /* HAL_USART_MODULE_ENABLED */ 354 355 #ifdef HAL_WWDG_MODULE_ENABLED 356 #include "stm32g4xx_hal_wwdg.h" 357 #endif /* HAL_WWDG_MODULE_ENABLED */ 358 359 /* Exported macro ------------------------------------------------------------*/ 360 #ifdef USE_FULL_ASSERT 361 /** 362 * @brief The assert_param macro is used for function's parameters check. 363 * @param expr: If expr is false, it calls assert_failed function 364 * which reports the name of the source file and the source 365 * line number of the call that failed. 366 * If expr is true, it returns no value. 367 * @retval None 368 */ 369 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 370 /* Exported functions ------------------------------------------------------- */ 371 void assert_failed(uint8_t *file, uint32_t line); 372 #else 373 #define assert_param(expr) ((void)0U) 374 #endif /* USE_FULL_ASSERT */ 375 376 #ifdef __cplusplus 377 } 378 #endif 379 380 #endif /* STM32G4xx_HAL_CONF_H */ 381