1 /** 2 ****************************************************************************** 3 * @file stm32h7xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration file. 6 ****************************************************************************** 7 * @attention 8 * 9 * <h2><center>© Copyright (c) 2017 STMicroelectronics. 10 * All rights reserved.</center></h2> 11 * 12 * This software component is licensed by ST under BSD 3-Clause license, 13 * the "License"; You may not use this file except in compliance with the 14 * License. You may obtain a copy of the License at: 15 * opensource.org/licenses/BSD-3-Clause 16 * 17 ****************************************************************************** 18 */ 19 20 /* Define to prevent recursive inclusion -------------------------------------*/ 21 #ifndef __STM32H7xx_HAL_CONF_H 22 #define __STM32H7xx_HAL_CONF_H 23 24 #ifdef __cplusplus 25 extern "C" { 26 #endif 27 28 /* Exported types ------------------------------------------------------------*/ 29 /* Exported constants --------------------------------------------------------*/ 30 31 /* ########################## Module Selection ############################## */ 32 /** 33 * @brief This is the list of modules to be used in the HAL driver 34 */ 35 #define HAL_MODULE_ENABLED 36 37 #define HAL_ADC_MODULE_ENABLED 38 /* #define HAL_FDCAN_MODULE_ENABLED */ 39 /* #define HAL_CEC_MODULE_ENABLED */ 40 /* #define HAL_COMP_MODULE_ENABLED */ 41 #define HAL_CRC_MODULE_ENABLED 42 /* #define HAL_CRYP_MODULE_ENABLED */ 43 #define HAL_DAC_MODULE_ENABLED 44 /* #define HAL_DCMI_MODULE_ENABLED */ 45 /* #define HAL_DMA2D_MODULE_ENABLED */ 46 #define HAL_ETH_MODULE_ENABLED 47 /* #define HAL_NAND_MODULE_ENABLED */ 48 /* #define HAL_NOR_MODULE_ENABLED */ 49 /* #define HAL_SRAM_MODULE_ENABLED */ 50 /* #define HAL_SDRAM_MODULE_ENABLED */ 51 /* #define HAL_HASH_MODULE_ENABLED */ 52 /* #define HAL_HRTIM_MODULE_ENABLED */ 53 /* #define HAL_JPEG_MODULE_ENABLED */ 54 /* #define HAL_OPAMP_MODULE_ENABLED */ 55 /* #define HAL_I2S_MODULE_ENABLED */ 56 /* #define HAL_SMBUS_MODULE_ENABLED */ 57 /* #define HAL_IWDG_MODULE_ENABLED */ 58 /* #define HAL_LPTIM_MODULE_ENABLED */ 59 /* #define HAL_LTDC_MODULE_ENABLED */ 60 #define HAL_QSPI_MODULE_ENABLED 61 #define HAL_RNG_MODULE_ENABLED 62 /* #define HAL_RTC_MODULE_ENABLED */ 63 /* #define HAL_SAI_MODULE_ENABLED */ 64 /* #define HAL_SD_MODULE_ENABLED */ 65 #define HAL_MMC_MODULE_ENABLED 66 /* #define HAL_SPDIFRX_MODULE_ENABLED */ 67 /* #define HAL_SPI_MODULE_ENABLED */ 68 /* #define HAL_SWPMI_MODULE_ENABLED */ 69 #define HAL_TIM_MODULE_ENABLED 70 #define HAL_UART_MODULE_ENABLED 71 /* #define HAL_USART_MODULE_ENABLED */ 72 /* #define HAL_IRDA_MODULE_ENABLED */ 73 /* #define HAL_SMARTCARD_MODULE_ENABLED */ 74 /* #define HAL_WWDG_MODULE_ENABLED */ 75 #define HAL_PCD_MODULE_ENABLED 76 /* #define HAL_HCD_MODULE_ENABLED */ 77 /* #define HAL_DFSDM_MODULE_ENABLED */ 78 /* #define HAL_DSI_MODULE_ENABLED */ 79 /* #define HAL_JPEG_MODULE_ENABLED */ 80 /* #define HAL_MDIOS_MODULE_ENABLED */ 81 #define HAL_GPIO_MODULE_ENABLED 82 #define HAL_DMA_MODULE_ENABLED 83 #define HAL_MDMA_MODULE_ENABLED 84 #define HAL_RCC_MODULE_ENABLED 85 #define HAL_FLASH_MODULE_ENABLED 86 #define HAL_EXTI_MODULE_ENABLED 87 #define HAL_PWR_MODULE_ENABLED 88 #define HAL_I2C_MODULE_ENABLED 89 #define HAL_CORTEX_MODULE_ENABLED 90 #define HAL_HSEM_MODULE_ENABLED 91 92 /* ########################## Oscillator Values adaptation ####################*/ 93 /** 94 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 95 * This value is used by the RCC HAL module to compute the system frequency 96 * (when HSE is used as system clock source, directly or through the PLL). 97 */ 98 #if !defined (HSE_VALUE) 99 #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */ 100 #endif /* HSE_VALUE */ 101 102 #if !defined (HSE_STARTUP_TIMEOUT) 103 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ 104 #endif /* HSE_STARTUP_TIMEOUT */ 105 106 /** 107 * @brief Internal oscillator (CSI) default value. 108 * This value is the default CSI value after Reset. 109 */ 110 #if !defined (CSI_VALUE) 111 #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ 112 #endif /* CSI_VALUE */ 113 114 /** 115 * @brief Internal High Speed oscillator (HSI) value. 116 * This value is used by the RCC HAL module to compute the system frequency 117 * (when HSI is used as system clock source, directly or through the PLL). 118 */ 119 #if !defined (HSI_VALUE) 120 #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ 121 #endif /* HSI_VALUE */ 122 123 /** 124 * @brief External Low Speed oscillator (LSE) value. 125 * This value is used by the UART, RTC HAL module to compute the system frequency 126 */ 127 #if !defined (LSE_VALUE) 128 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 129 #endif /* LSE_VALUE */ 130 131 #if !defined (LSE_STARTUP_TIMEOUT) 132 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 133 #endif /* LSE_STARTUP_TIMEOUT */ 134 135 /** 136 * @brief External clock source for I2S peripheral 137 * This value is used by the I2S HAL module to compute the I2S clock source 138 * frequency, this source is inserted directly through I2S_CKIN pad. 139 */ 140 #if !defined (EXTERNAL_CLOCK_VALUE) 141 #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ 142 #endif /* EXTERNAL_CLOCK_VALUE */ 143 144 /* Tip: To avoid modifying this file each time you need to use different HSE, 145 === you can define the HSE value in your toolchain compiler preprocessor. */ 146 147 /* ########################### System Configuration ######################### */ 148 /** 149 * @brief This is the HAL system configuration section 150 */ 151 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ 152 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ 153 #define USE_RTOS 0U 154 #define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ 155 156 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ 157 #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ 158 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ 159 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ 160 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ 161 #define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ 162 #define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ 163 #define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ 164 #define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ 165 #define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ 166 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ 167 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ 168 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ 169 #define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ 170 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ 171 #define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ 172 #define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ 173 #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ 174 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ 175 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ 176 #define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ 177 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ 178 #define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ 179 #define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ 180 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ 181 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ 182 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ 183 #define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ 184 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ 185 #define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ 186 #define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ 187 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ 188 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ 189 #define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ 190 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ 191 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ 192 193 /* ########################### Ethernet Configuration ######################### */ 194 #define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ 195 #define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ 196 197 #define ETH_MAC_ADDR0 ((uint8_t)0x02) 198 #define ETH_MAC_ADDR1 ((uint8_t)0x00) 199 #define ETH_MAC_ADDR2 ((uint8_t)0x00) 200 #define ETH_MAC_ADDR3 ((uint8_t)0x00) 201 #define ETH_MAC_ADDR4 ((uint8_t)0x00) 202 #define ETH_MAC_ADDR5 ((uint8_t)0x00) 203 204 /* ########################## Assert Selection ############################## */ 205 /** 206 * @brief Uncomment the line below to expanse the "assert_param" macro in the 207 * HAL drivers code 208 */ 209 /* #define USE_FULL_ASSERT 1U */ 210 211 /* Includes ------------------------------------------------------------------*/ 212 /** 213 * @brief Include module's header file 214 */ 215 216 #ifdef HAL_RCC_MODULE_ENABLED 217 #include "stm32h7xx_hal_rcc.h" 218 #endif /* HAL_RCC_MODULE_ENABLED */ 219 220 #ifdef HAL_GPIO_MODULE_ENABLED 221 #include "stm32h7xx_hal_gpio.h" 222 #endif /* HAL_GPIO_MODULE_ENABLED */ 223 224 #ifdef HAL_DMA_MODULE_ENABLED 225 #include "stm32h7xx_hal_dma.h" 226 #endif /* HAL_DMA_MODULE_ENABLED */ 227 228 #ifdef HAL_MDMA_MODULE_ENABLED 229 #include "stm32h7xx_hal_mdma.h" 230 #endif /* HAL_MDMA_MODULE_ENABLED */ 231 232 #ifdef HAL_HASH_MODULE_ENABLED 233 #include "stm32h7xx_hal_hash.h" 234 #endif /* HAL_HASH_MODULE_ENABLED */ 235 236 #ifdef HAL_DCMI_MODULE_ENABLED 237 #include "stm32h7xx_hal_dcmi.h" 238 #endif /* HAL_DCMI_MODULE_ENABLED */ 239 240 #ifdef HAL_DMA2D_MODULE_ENABLED 241 #include "stm32h7xx_hal_dma2d.h" 242 #endif /* HAL_DMA2D_MODULE_ENABLED */ 243 244 #ifdef HAL_DSI_MODULE_ENABLED 245 #include "stm32h7xx_hal_dsi.h" 246 #endif /* HAL_DSI_MODULE_ENABLED */ 247 248 #ifdef HAL_DFSDM_MODULE_ENABLED 249 #include "stm32h7xx_hal_dfsdm.h" 250 #endif /* HAL_DFSDM_MODULE_ENABLED */ 251 252 #ifdef HAL_ETH_MODULE_ENABLED 253 #include "stm32h7xx_hal_eth.h" 254 #endif /* HAL_ETH_MODULE_ENABLED */ 255 256 #ifdef HAL_EXTI_MODULE_ENABLED 257 #include "stm32h7xx_hal_exti.h" 258 #endif /* HAL_EXTI_MODULE_ENABLED */ 259 260 #ifdef HAL_CORTEX_MODULE_ENABLED 261 #include "stm32h7xx_hal_cortex.h" 262 #endif /* HAL_CORTEX_MODULE_ENABLED */ 263 264 #ifdef HAL_ADC_MODULE_ENABLED 265 #include "stm32h7xx_hal_adc.h" 266 #endif /* HAL_ADC_MODULE_ENABLED */ 267 268 #ifdef HAL_FDCAN_MODULE_ENABLED 269 #include "stm32h7xx_hal_fdcan.h" 270 #endif /* HAL_FDCAN_MODULE_ENABLED */ 271 272 #ifdef HAL_CEC_MODULE_ENABLED 273 #include "stm32h7xx_hal_cec.h" 274 #endif /* HAL_CEC_MODULE_ENABLED */ 275 276 #ifdef HAL_COMP_MODULE_ENABLED 277 #include "stm32h7xx_hal_comp.h" 278 #endif /* HAL_COMP_MODULE_ENABLED */ 279 280 #ifdef HAL_CRC_MODULE_ENABLED 281 #include "stm32h7xx_hal_crc.h" 282 #endif /* HAL_CRC_MODULE_ENABLED */ 283 284 #ifdef HAL_CRYP_MODULE_ENABLED 285 #include "stm32h7xx_hal_cryp.h" 286 #endif /* HAL_CRYP_MODULE_ENABLED */ 287 288 #ifdef HAL_DAC_MODULE_ENABLED 289 #include "stm32h7xx_hal_dac.h" 290 #endif /* HAL_DAC_MODULE_ENABLED */ 291 292 #ifdef HAL_FLASH_MODULE_ENABLED 293 #include "stm32h7xx_hal_flash.h" 294 #endif /* HAL_FLASH_MODULE_ENABLED */ 295 296 #ifdef HAL_HRTIM_MODULE_ENABLED 297 #include "stm32h7xx_hal_hrtim.h" 298 #endif /* HAL_HRTIM_MODULE_ENABLED */ 299 300 #ifdef HAL_HSEM_MODULE_ENABLED 301 #include "stm32h7xx_hal_hsem.h" 302 #endif /* HAL_HSEM_MODULE_ENABLED */ 303 304 #ifdef HAL_SRAM_MODULE_ENABLED 305 #include "stm32h7xx_hal_sram.h" 306 #endif /* HAL_SRAM_MODULE_ENABLED */ 307 308 #ifdef HAL_NOR_MODULE_ENABLED 309 #include "stm32h7xx_hal_nor.h" 310 #endif /* HAL_NOR_MODULE_ENABLED */ 311 312 #ifdef HAL_NAND_MODULE_ENABLED 313 #include "stm32h7xx_hal_nand.h" 314 #endif /* HAL_NAND_MODULE_ENABLED */ 315 316 #ifdef HAL_I2C_MODULE_ENABLED 317 #include "stm32h7xx_hal_i2c.h" 318 #endif /* HAL_I2C_MODULE_ENABLED */ 319 320 #ifdef HAL_I2S_MODULE_ENABLED 321 #include "stm32h7xx_hal_i2s.h" 322 #endif /* HAL_I2S_MODULE_ENABLED */ 323 324 #ifdef HAL_IWDG_MODULE_ENABLED 325 #include "stm32h7xx_hal_iwdg.h" 326 #endif /* HAL_IWDG_MODULE_ENABLED */ 327 328 #ifdef HAL_JPEG_MODULE_ENABLED 329 #include "stm32h7xx_hal_jpeg.h" 330 #endif /* HAL_JPEG_MODULE_ENABLED */ 331 332 #ifdef HAL_MDIOS_MODULE_ENABLED 333 #include "stm32h7xx_hal_mdios.h" 334 #endif /* HAL_MDIOS_MODULE_ENABLED */ 335 336 #ifdef HAL_MMC_MODULE_ENABLED 337 #include "stm32h7xx_hal_mmc.h" 338 #endif /* HAL_MMC_MODULE_ENABLED */ 339 340 #ifdef HAL_LPTIM_MODULE_ENABLED 341 #include "stm32h7xx_hal_lptim.h" 342 #endif /* HAL_LPTIM_MODULE_ENABLED */ 343 344 #ifdef HAL_LTDC_MODULE_ENABLED 345 #include "stm32h7xx_hal_ltdc.h" 346 #endif /* HAL_LTDC_MODULE_ENABLED */ 347 348 #ifdef HAL_OPAMP_MODULE_ENABLED 349 #include "stm32h7xx_hal_opamp.h" 350 #endif /* HAL_OPAMP_MODULE_ENABLED */ 351 352 #ifdef HAL_PWR_MODULE_ENABLED 353 #include "stm32h7xx_hal_pwr.h" 354 #endif /* HAL_PWR_MODULE_ENABLED */ 355 356 #ifdef HAL_QSPI_MODULE_ENABLED 357 #include "stm32h7xx_hal_qspi.h" 358 #endif /* HAL_QSPI_MODULE_ENABLED */ 359 360 #ifdef HAL_RAMECC_MODULE_ENABLED 361 #include "stm32h7xx_hal_ramecc.h" 362 #endif /* HAL_HCD_MODULE_ENABLED */ 363 364 #ifdef HAL_RNG_MODULE_ENABLED 365 #include "stm32h7xx_hal_rng.h" 366 #endif /* HAL_RNG_MODULE_ENABLED */ 367 368 #ifdef HAL_RTC_MODULE_ENABLED 369 #include "stm32h7xx_hal_rtc.h" 370 #endif /* HAL_RTC_MODULE_ENABLED */ 371 372 #ifdef HAL_SAI_MODULE_ENABLED 373 #include "stm32h7xx_hal_sai.h" 374 #endif /* HAL_SAI_MODULE_ENABLED */ 375 376 #ifdef HAL_SD_MODULE_ENABLED 377 #include "stm32h7xx_hal_sd.h" 378 #endif /* HAL_SD_MODULE_ENABLED */ 379 380 #ifdef HAL_SDRAM_MODULE_ENABLED 381 #include "stm32h7xx_hal_sdram.h" 382 #endif /* HAL_SDRAM_MODULE_ENABLED */ 383 384 #ifdef HAL_SPI_MODULE_ENABLED 385 #include "stm32h7xx_hal_spi.h" 386 #endif /* HAL_SPI_MODULE_ENABLED */ 387 388 #ifdef HAL_SPDIFRX_MODULE_ENABLED 389 #include "stm32h7xx_hal_spdifrx.h" 390 #endif /* HAL_SPDIFRX_MODULE_ENABLED */ 391 392 #ifdef HAL_SWPMI_MODULE_ENABLED 393 #include "stm32h7xx_hal_swpmi.h" 394 #endif /* HAL_SWPMI_MODULE_ENABLED */ 395 396 #ifdef HAL_TIM_MODULE_ENABLED 397 #include "stm32h7xx_hal_tim.h" 398 #endif /* HAL_TIM_MODULE_ENABLED */ 399 400 #ifdef HAL_UART_MODULE_ENABLED 401 #include "stm32h7xx_hal_uart.h" 402 #endif /* HAL_UART_MODULE_ENABLED */ 403 404 #ifdef HAL_USART_MODULE_ENABLED 405 #include "stm32h7xx_hal_usart.h" 406 #endif /* HAL_USART_MODULE_ENABLED */ 407 408 #ifdef HAL_IRDA_MODULE_ENABLED 409 #include "stm32h7xx_hal_irda.h" 410 #endif /* HAL_IRDA_MODULE_ENABLED */ 411 412 #ifdef HAL_SMARTCARD_MODULE_ENABLED 413 #include "stm32h7xx_hal_smartcard.h" 414 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 415 416 #ifdef HAL_SMBUS_MODULE_ENABLED 417 #include "stm32h7xx_hal_smbus.h" 418 #endif /* HAL_SMBUS_MODULE_ENABLED */ 419 420 #ifdef HAL_WWDG_MODULE_ENABLED 421 #include "stm32h7xx_hal_wwdg.h" 422 #endif /* HAL_WWDG_MODULE_ENABLED */ 423 424 #ifdef HAL_PCD_MODULE_ENABLED 425 #include "stm32h7xx_hal_pcd.h" 426 #endif /* HAL_PCD_MODULE_ENABLED */ 427 428 #ifdef HAL_HCD_MODULE_ENABLED 429 #include "stm32h7xx_hal_hcd.h" 430 #endif /* HAL_HCD_MODULE_ENABLED */ 431 432 /* Exported macro ------------------------------------------------------------*/ 433 #ifdef USE_FULL_ASSERT 434 /** 435 * @brief The assert_param macro is used for function's parameters check. 436 * @param expr: If expr is false, it calls assert_failed function 437 * which reports the name of the source file and the source 438 * line number of the call that failed. 439 * If expr is true, it returns no value. 440 * @retval None 441 */ 442 #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) 443 /* Exported functions ------------------------------------------------------- */ 444 void assert_failed(uint8_t* file, uint32_t line); 445 #else 446 #define assert_param(expr) ((void)0) 447 #endif /* USE_FULL_ASSERT */ 448 449 #ifdef __cplusplus 450 } 451 #endif 452 453 #endif /* __STM32H7xx_HAL_CONF_H */ 454 455 456 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 457