1 /** 2 ****************************************************************************** 3 * @file stm32l0xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32l0xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * <h2><center>© Copyright (c) 2016 STMicroelectronics. 12 * All rights reserved.</center></h2> 13 * 14 * This software component is licensed by ST under BSD 3-Clause license, 15 * the "License"; You may not use this file except in compliance with the 16 * License. You may obtain a copy of the License at: 17 * opensource.org/licenses/BSD-3-Clause 18 * 19 ****************************************************************************** 20 */ 21 22 /* Define to prevent recursive inclusion -------------------------------------*/ 23 #ifndef __STM32L0xx_HAL_CONF_H 24 #define __STM32L0xx_HAL_CONF_H 25 26 #ifdef __cplusplus 27 extern "C" { 28 #endif 29 30 /* Exported types ------------------------------------------------------------*/ 31 /* Exported constants --------------------------------------------------------*/ 32 33 /* ########################## Module Selection ############################## */ 34 /** 35 * @brief This is the list of modules to be used in the HAL driver 36 */ 37 38 #define HAL_MODULE_ENABLED 39 /*#define HAL_ADC_MODULE_ENABLED */ 40 /*#define HAL_CRYP_MODULE_ENABLED */ 41 /*#define HAL_COMP_MODULE_ENABLED */ 42 /*#define HAL_CRC_MODULE_ENABLED */ 43 /*#define HAL_CRYP_MODULE_ENABLED */ 44 /*#define HAL_DAC_MODULE_ENABLED */ 45 /*#define HAL_FIREWALL_MODULE_ENABLED */ 46 /*#define HAL_I2S_MODULE_ENABLED */ 47 /*#define HAL_IWDG_MODULE_ENABLED */ 48 /*#define HAL_LCD_MODULE_ENABLED */ 49 /*#define HAL_LPTIM_MODULE_ENABLED */ 50 /*#define HAL_RNG_MODULE_ENABLED */ 51 /*#define HAL_RTC_MODULE_ENABLED */ 52 /*#define HAL_SPI_MODULE_ENABLED */ 53 /*#define HAL_TIM_MODULE_ENABLED */ 54 /*#define HAL_TSC_MODULE_ENABLED */ 55 #define HAL_UART_MODULE_ENABLED 56 /*#define HAL_USART_MODULE_ENABLED */ 57 /*#define HAL_IRDA_MODULE_ENABLED */ 58 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 59 /*#define HAL_SMBUS_MODULE_ENABLED */ 60 /*#define HAL_WWDG_MODULE_ENABLED */ 61 /*#define HAL_PCD_MODULE_ENABLED */ 62 /*#define HAL_EXTI_MODULE_ENABLED */ 63 #define HAL_GPIO_MODULE_ENABLED 64 #define HAL_DMA_MODULE_ENABLED 65 #define HAL_I2C_MODULE_ENABLED 66 #define HAL_RCC_MODULE_ENABLED 67 #define HAL_FLASH_MODULE_ENABLED 68 #define HAL_PWR_MODULE_ENABLED 69 #define HAL_CORTEX_MODULE_ENABLED 70 71 /* ########################## Oscillator Values adaptation ####################*/ 72 /** 73 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 74 * This value is used by the RCC HAL module to compute the system frequency 75 * (when HSE is used as system clock source, directly or through the PLL). 76 */ 77 #if !defined (HSE_VALUE) 78 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ 79 #endif /* HSE_VALUE */ 80 81 #if !defined (HSE_STARTUP_TIMEOUT) 82 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ 83 #endif /* HSE_STARTUP_TIMEOUT */ 84 85 /** 86 * @brief Internal Multiple Speed oscillator (MSI) default value. 87 * This value is the default MSI range value after Reset. 88 */ 89 #if !defined (MSI_VALUE) 90 #define MSI_VALUE ((uint32_t)2097000U) /*!< Value of the Internal oscillator in Hz*/ 91 #endif /* MSI_VALUE */ 92 93 /** 94 * @brief Internal High Speed oscillator (HSI) value. 95 * This value is used by the RCC HAL module to compute the system frequency 96 * (when HSI is used as system clock source, directly or through the PLL). 97 */ 98 #if !defined (HSI_VALUE) 99 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ 100 #endif /* HSI_VALUE */ 101 102 /** 103 * @brief Internal High Speed oscillator for USB (HSI48) value. 104 */ 105 #if !defined (HSI48_VALUE) 106 #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. 107 The real value may vary depending on the variations 108 in voltage and temperature. */ 109 #endif /* HSI48_VALUE */ 110 111 /** 112 * @brief Internal Low Speed oscillator (LSI) value. 113 */ 114 #if !defined (LSI_VALUE) 115 #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ 116 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 117 The real value may vary depending on the variations 118 in voltage and temperature.*/ 119 /** 120 * @brief External Low Speed oscillator (LSE) value. 121 * This value is used by the UART, RTC HAL module to compute the system frequency 122 */ 123 #if !defined (LSE_VALUE) 124 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 125 #endif /* LSE_VALUE */ 126 127 #if !defined (LSE_STARTUP_TIMEOUT) 128 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 129 #endif /* LSE_STARTUP_TIMEOUT */ 130 131 /* Tip: To avoid modifying this file each time you need to use different HSE, 132 === you can define the HSE value in your toolchain compiler preprocessor. */ 133 134 /* ########################### System Configuration ######################### */ 135 /** 136 * @brief This is the HAL system configuration section 137 */ 138 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ 139 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ 140 #define USE_RTOS 0U 141 #define PREFETCH_ENABLE 0U 142 #define PREREAD_ENABLE 1U 143 #define BUFFER_CACHE_DISABLE 0U 144 145 /* ########################## Assert Selection ############################## */ 146 /** 147 * @brief Uncomment the line below to expanse the "assert_param" macro in the 148 * HAL drivers code 149 */ 150 /* #define USE_FULL_ASSERT 1U */ 151 152 /* Includes ------------------------------------------------------------------*/ 153 /** 154 * @brief Include module's header file 155 */ 156 157 #ifdef HAL_RCC_MODULE_ENABLED 158 #include "stm32l0xx_hal_rcc.h" 159 #endif /* HAL_RCC_MODULE_ENABLED */ 160 161 #ifdef HAL_EXTI_MODULE_ENABLED 162 #include "stm32l0xx_hal_exti.h" 163 #endif /* HAL_EXTI_MODULE_ENABLED */ 164 165 #ifdef HAL_GPIO_MODULE_ENABLED 166 #include "stm32l0xx_hal_gpio.h" 167 #endif /* HAL_GPIO_MODULE_ENABLED */ 168 169 #ifdef HAL_DMA_MODULE_ENABLED 170 #include "stm32l0xx_hal_dma.h" 171 #endif /* HAL_DMA_MODULE_ENABLED */ 172 173 #ifdef HAL_CORTEX_MODULE_ENABLED 174 #include "stm32l0xx_hal_cortex.h" 175 #endif /* HAL_CORTEX_MODULE_ENABLED */ 176 177 #ifdef HAL_ADC_MODULE_ENABLED 178 #include "stm32l0xx_hal_adc.h" 179 #endif /* HAL_ADC_MODULE_ENABLED */ 180 181 #ifdef HAL_COMP_MODULE_ENABLED 182 #include "stm32l0xx_hal_comp.h" 183 #endif /* HAL_COMP_MODULE_ENABLED */ 184 185 #ifdef HAL_CRC_MODULE_ENABLED 186 #include "stm32l0xx_hal_crc.h" 187 #endif /* HAL_CRC_MODULE_ENABLED */ 188 189 #ifdef HAL_CRYP_MODULE_ENABLED 190 #include "stm32l0xx_hal_cryp.h" 191 #endif /* HAL_CRYP_MODULE_ENABLED */ 192 193 #ifdef HAL_DAC_MODULE_ENABLED 194 #include "stm32l0xx_hal_dac.h" 195 #endif /* HAL_DAC_MODULE_ENABLED */ 196 197 #ifdef HAL_FIREWALL_MODULE_ENABLED 198 #include "stm32l0xx_hal_firewall.h" 199 #endif /* HAL_FIREWALL_MODULE_ENABLED */ 200 201 #ifdef HAL_FLASH_MODULE_ENABLED 202 #include "stm32l0xx_hal_flash.h" 203 #endif /* HAL_FLASH_MODULE_ENABLED */ 204 205 #ifdef HAL_I2C_MODULE_ENABLED 206 #include "stm32l0xx_hal_i2c.h" 207 #endif /* HAL_I2C_MODULE_ENABLED */ 208 209 #ifdef HAL_I2S_MODULE_ENABLED 210 #include "stm32l0xx_hal_i2s.h" 211 #endif /* HAL_I2S_MODULE_ENABLED */ 212 213 #ifdef HAL_IWDG_MODULE_ENABLED 214 #include "stm32l0xx_hal_iwdg.h" 215 #endif /* HAL_IWDG_MODULE_ENABLED */ 216 217 #ifdef HAL_LCD_MODULE_ENABLED 218 #include "stm32l0xx_hal_lcd.h" 219 #endif /* HAL_LCD_MODULE_ENABLED */ 220 221 #ifdef HAL_LPTIM_MODULE_ENABLED 222 #include "stm32l0xx_hal_lptim.h" 223 #endif /* HAL_LPTIM_MODULE_ENABLED */ 224 225 #ifdef HAL_PWR_MODULE_ENABLED 226 #include "stm32l0xx_hal_pwr.h" 227 #endif /* HAL_PWR_MODULE_ENABLED */ 228 229 #ifdef HAL_RNG_MODULE_ENABLED 230 #include "stm32l0xx_hal_rng.h" 231 #endif /* HAL_RNG_MODULE_ENABLED */ 232 233 #ifdef HAL_RTC_MODULE_ENABLED 234 #include "stm32l0xx_hal_rtc.h" 235 236 #endif /* HAL_RTC_MODULE_ENABLED */ 237 238 #ifdef HAL_SPI_MODULE_ENABLED 239 #include "stm32l0xx_hal_spi.h" 240 #endif /* HAL_SPI_MODULE_ENABLED */ 241 242 #ifdef HAL_TIM_MODULE_ENABLED 243 #include "stm32l0xx_hal_tim.h" 244 #endif /* HAL_TIM_MODULE_ENABLED */ 245 246 #ifdef HAL_TSC_MODULE_ENABLED 247 #include "stm32l0xx_hal_tsc.h" 248 #endif /* HAL_TSC_MODULE_ENABLED */ 249 250 #ifdef HAL_UART_MODULE_ENABLED 251 #include "stm32l0xx_hal_uart.h" 252 #endif /* HAL_UART_MODULE_ENABLED */ 253 254 #ifdef HAL_USART_MODULE_ENABLED 255 #include "stm32l0xx_hal_usart.h" 256 #endif /* HAL_USART_MODULE_ENABLED */ 257 258 #ifdef HAL_IRDA_MODULE_ENABLED 259 #include "stm32l0xx_hal_irda.h" 260 #endif /* HAL_IRDA_MODULE_ENABLED */ 261 262 #ifdef HAL_SMARTCARD_MODULE_ENABLED 263 #include "stm32l0xx_hal_smartcard.h" 264 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 265 266 #ifdef HAL_SMBUS_MODULE_ENABLED 267 #include "stm32l0xx_hal_smbus.h" 268 #endif /* HAL_SMBUS_MODULE_ENABLED */ 269 270 #ifdef HAL_WWDG_MODULE_ENABLED 271 #include "stm32l0xx_hal_wwdg.h" 272 #endif /* HAL_WWDG_MODULE_ENABLED */ 273 274 #ifdef HAL_PCD_MODULE_ENABLED 275 #include "stm32l0xx_hal_pcd.h" 276 #endif /* HAL_PCD_MODULE_ENABLED */ 277 278 /* Exported macro ------------------------------------------------------------*/ 279 #ifdef USE_FULL_ASSERT 280 /** 281 * @brief The assert_param macro is used for function's parameters check. 282 * @param expr: If expr is false, it calls assert_failed function 283 * which reports the name of the source file and the source 284 * line number of the call that failed. 285 * If expr is true, it returns no value. 286 * @retval None 287 */ 288 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 289 /* Exported functions ------------------------------------------------------- */ 290 void assert_failed(uint8_t* file, uint32_t line); 291 #else 292 #define assert_param(expr) ((void)0U) 293 #endif /* USE_FULL_ASSERT */ 294 295 #ifdef __cplusplus 296 } 297 #endif 298 299 #endif /* __STM32L0xx_HAL_CONF_H */ 300 301 302 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 303