1 /** 2 ****************************************************************************** 3 * @file stm32l0xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> 9 * 10 * Redistribution and use in source and binary forms, with or without modification, 11 * are permitted provided that the following conditions are met: 12 * 1. Redistributions of source code must retain the above copyright notice, 13 * this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright notice, 15 * this list of conditions and the following disclaimer in the documentation 16 * and/or other materials provided with the distribution. 17 * 3. Neither the name of STMicroelectronics nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 ****************************************************************************** 33 */ 34 35 /* Define to prevent recursive inclusion -------------------------------------*/ 36 #ifndef __STM32L0xx_HAL_CONF_H 37 #define __STM32L0xx_HAL_CONF_H 38 39 #ifdef __cplusplus 40 extern "C" { 41 #endif 42 43 #include "main.h" 44 /* Exported types ------------------------------------------------------------*/ 45 /* Exported constants --------------------------------------------------------*/ 46 47 /* ########################## Module Selection ############################## */ 48 /** 49 * @brief This is the list of modules to be used in the HAL driver 50 */ 51 52 #define HAL_MODULE_ENABLED 53 /*#define HAL_ADC_MODULE_ENABLED */ 54 /*#define HAL_CRYP_MODULE_ENABLED */ 55 /*#define HAL_COMP_MODULE_ENABLED */ 56 /*#define HAL_CRC_MODULE_ENABLED */ 57 /*#define HAL_CRYP_MODULE_ENABLED */ 58 /*#define HAL_DAC_MODULE_ENABLED */ 59 /*#define HAL_FIREWALL_MODULE_ENABLED */ 60 /*#define HAL_I2S_MODULE_ENABLED */ 61 /*#define HAL_IWDG_MODULE_ENABLED */ 62 /*#define HAL_LCD_MODULE_ENABLED */ 63 /*#define HAL_LPTIM_MODULE_ENABLED */ 64 /*#define HAL_RNG_MODULE_ENABLED */ 65 /*#define HAL_RTC_MODULE_ENABLED */ 66 /*#define HAL_SPI_MODULE_ENABLED */ 67 /*#define HAL_TIM_MODULE_ENABLED */ 68 /*#define HAL_TSC_MODULE_ENABLED */ 69 #define HAL_UART_MODULE_ENABLED 70 /*#define HAL_USART_MODULE_ENABLED */ 71 /*#define HAL_IRDA_MODULE_ENABLED */ 72 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 73 /*#define HAL_SMBUS_MODULE_ENABLED */ 74 /*#define HAL_WWDG_MODULE_ENABLED */ 75 /*#define HAL_PCD_MODULE_ENABLED */ 76 /*#define HAL_EXTI_MODULE_ENABLED */ 77 #define HAL_GPIO_MODULE_ENABLED 78 #define HAL_DMA_MODULE_ENABLED 79 #define HAL_I2C_MODULE_ENABLED 80 #define HAL_RCC_MODULE_ENABLED 81 #define HAL_FLASH_MODULE_ENABLED 82 #define HAL_PWR_MODULE_ENABLED 83 #define HAL_CORTEX_MODULE_ENABLED 84 85 /* ########################## Oscillator Values adaptation ####################*/ 86 /** 87 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 88 * This value is used by the RCC HAL module to compute the system frequency 89 * (when HSE is used as system clock source, directly or through the PLL). 90 */ 91 #if !defined (HSE_VALUE) 92 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ 93 #endif /* HSE_VALUE */ 94 95 #if !defined (HSE_STARTUP_TIMEOUT) 96 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ 97 #endif /* HSE_STARTUP_TIMEOUT */ 98 99 /** 100 * @brief Internal Multiple Speed oscillator (MSI) default value. 101 * This value is the default MSI range value after Reset. 102 */ 103 #if !defined (MSI_VALUE) 104 #define MSI_VALUE ((uint32_t)4194000U) /*!< Value of the Internal oscillator in Hz*/ 105 #endif /* MSI_VALUE */ 106 107 /** 108 * @brief Internal High Speed oscillator (HSI) value. 109 * This value is used by the RCC HAL module to compute the system frequency 110 * (when HSI is used as system clock source, directly or through the PLL). 111 */ 112 #if !defined (HSI_VALUE) 113 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ 114 #endif /* HSI_VALUE */ 115 116 /** 117 * @brief Internal High Speed oscillator for USB (HSI48) value. 118 */ 119 #if !defined (HSI48_VALUE) 120 #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. 121 The real value may vary depending on the variations 122 in voltage and temperature. */ 123 #endif /* HSI48_VALUE */ 124 125 /** 126 * @brief Internal Low Speed oscillator (LSI) value. 127 */ 128 #if !defined (LSI_VALUE) 129 #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ 130 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 131 The real value may vary depending on the variations 132 in voltage and temperature.*/ 133 /** 134 * @brief External Low Speed oscillator (LSE) value. 135 * This value is used by the UART, RTC HAL module to compute the system frequency 136 */ 137 #if !defined (LSE_VALUE) 138 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 139 #endif /* LSE_VALUE */ 140 141 #if !defined (LSE_STARTUP_TIMEOUT) 142 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 143 #endif /* LSE_STARTUP_TIMEOUT */ 144 145 /* Tip: To avoid modifying this file each time you need to use different HSE, 146 === you can define the HSE value in your toolchain compiler preprocessor. */ 147 148 /* ########################### System Configuration ######################### */ 149 /** 150 * @brief This is the HAL system configuration section 151 */ 152 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ 153 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ 154 #define USE_RTOS 0U 155 #define PREFETCH_ENABLE 0U 156 #define PREREAD_ENABLE 1U 157 #define BUFFER_CACHE_DISABLE 0U 158 159 /* ########################## Assert Selection ############################## */ 160 /** 161 * @brief Uncomment the line below to expanse the "assert_param" macro in the 162 * HAL drivers code 163 */ 164 /* #define USE_FULL_ASSERT 1U */ 165 166 /* Includes ------------------------------------------------------------------*/ 167 /** 168 * @brief Include module's header file 169 */ 170 171 #ifdef HAL_RCC_MODULE_ENABLED 172 #include "stm32l0xx_hal_rcc.h" 173 #endif /* HAL_RCC_MODULE_ENABLED */ 174 175 #ifdef HAL_EXTI_MODULE_ENABLED 176 #include "stm32l0xx_hal_exti.h" 177 #endif /* HAL_EXTI_MODULE_ENABLED */ 178 179 #ifdef HAL_GPIO_MODULE_ENABLED 180 #include "stm32l0xx_hal_gpio.h" 181 #endif /* HAL_GPIO_MODULE_ENABLED */ 182 183 #ifdef HAL_DMA_MODULE_ENABLED 184 #include "stm32l0xx_hal_dma.h" 185 #endif /* HAL_DMA_MODULE_ENABLED */ 186 187 #ifdef HAL_CORTEX_MODULE_ENABLED 188 #include "stm32l0xx_hal_cortex.h" 189 #endif /* HAL_CORTEX_MODULE_ENABLED */ 190 191 #ifdef HAL_ADC_MODULE_ENABLED 192 #include "stm32l0xx_hal_adc.h" 193 #endif /* HAL_ADC_MODULE_ENABLED */ 194 195 #ifdef HAL_COMP_MODULE_ENABLED 196 #include "stm32l0xx_hal_comp.h" 197 #endif /* HAL_COMP_MODULE_ENABLED */ 198 199 #ifdef HAL_CRC_MODULE_ENABLED 200 #include "stm32l0xx_hal_crc.h" 201 #endif /* HAL_CRC_MODULE_ENABLED */ 202 203 #ifdef HAL_CRYP_MODULE_ENABLED 204 #include "stm32l0xx_hal_cryp.h" 205 #endif /* HAL_CRYP_MODULE_ENABLED */ 206 207 #ifdef HAL_DAC_MODULE_ENABLED 208 #include "stm32l0xx_hal_dac.h" 209 #endif /* HAL_DAC_MODULE_ENABLED */ 210 211 #ifdef HAL_FIREWALL_MODULE_ENABLED 212 #include "stm32l0xx_hal_firewall.h" 213 #endif /* HAL_FIREWALL_MODULE_ENABLED */ 214 215 #ifdef HAL_FLASH_MODULE_ENABLED 216 #include "stm32l0xx_hal_flash.h" 217 #endif /* HAL_FLASH_MODULE_ENABLED */ 218 219 #ifdef HAL_I2C_MODULE_ENABLED 220 #include "stm32l0xx_hal_i2c.h" 221 #endif /* HAL_I2C_MODULE_ENABLED */ 222 223 #ifdef HAL_I2S_MODULE_ENABLED 224 #include "stm32l0xx_hal_i2s.h" 225 #endif /* HAL_I2S_MODULE_ENABLED */ 226 227 #ifdef HAL_IWDG_MODULE_ENABLED 228 #include "stm32l0xx_hal_iwdg.h" 229 #endif /* HAL_IWDG_MODULE_ENABLED */ 230 231 #ifdef HAL_LCD_MODULE_ENABLED 232 #include "stm32l0xx_hal_lcd.h" 233 #endif /* HAL_LCD_MODULE_ENABLED */ 234 235 #ifdef HAL_LPTIM_MODULE_ENABLED 236 #include "stm32l0xx_hal_lptim.h" 237 #endif /* HAL_LPTIM_MODULE_ENABLED */ 238 239 #ifdef HAL_PWR_MODULE_ENABLED 240 #include "stm32l0xx_hal_pwr.h" 241 #endif /* HAL_PWR_MODULE_ENABLED */ 242 243 #ifdef HAL_RNG_MODULE_ENABLED 244 #include "stm32l0xx_hal_rng.h" 245 #endif /* HAL_RNG_MODULE_ENABLED */ 246 247 #ifdef HAL_RTC_MODULE_ENABLED 248 #include "stm32l0xx_hal_rtc.h" 249 250 #endif /* HAL_RTC_MODULE_ENABLED */ 251 252 #ifdef HAL_SPI_MODULE_ENABLED 253 #include "stm32l0xx_hal_spi.h" 254 #endif /* HAL_SPI_MODULE_ENABLED */ 255 256 #ifdef HAL_TIM_MODULE_ENABLED 257 #include "stm32l0xx_hal_tim.h" 258 #endif /* HAL_TIM_MODULE_ENABLED */ 259 260 #ifdef HAL_TSC_MODULE_ENABLED 261 #include "stm32l0xx_hal_tsc.h" 262 #endif /* HAL_TSC_MODULE_ENABLED */ 263 264 #ifdef HAL_UART_MODULE_ENABLED 265 #include "stm32l0xx_hal_uart.h" 266 #endif /* HAL_UART_MODULE_ENABLED */ 267 268 #ifdef HAL_USART_MODULE_ENABLED 269 #include "stm32l0xx_hal_usart.h" 270 #endif /* HAL_USART_MODULE_ENABLED */ 271 272 #ifdef HAL_IRDA_MODULE_ENABLED 273 #include "stm32l0xx_hal_irda.h" 274 #endif /* HAL_IRDA_MODULE_ENABLED */ 275 276 #ifdef HAL_SMARTCARD_MODULE_ENABLED 277 #include "stm32l0xx_hal_smartcard.h" 278 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 279 280 #ifdef HAL_SMBUS_MODULE_ENABLED 281 #include "stm32l0xx_hal_smbus.h" 282 #endif /* HAL_SMBUS_MODULE_ENABLED */ 283 284 #ifdef HAL_WWDG_MODULE_ENABLED 285 #include "stm32l0xx_hal_wwdg.h" 286 #endif /* HAL_WWDG_MODULE_ENABLED */ 287 288 #ifdef HAL_PCD_MODULE_ENABLED 289 #include "stm32l0xx_hal_pcd.h" 290 #endif /* HAL_PCD_MODULE_ENABLED */ 291 292 /* Exported macro ------------------------------------------------------------*/ 293 #ifdef USE_FULL_ASSERT 294 /** 295 * @brief The assert_param macro is used for function's parameters check. 296 * @param expr: If expr is false, it calls assert_failed function 297 * which reports the name of the source file and the source 298 * line number of the call that failed. 299 * If expr is true, it returns no value. 300 * @retval None 301 */ 302 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 303 /* Exported functions ------------------------------------------------------- */ 304 void assert_failed(uint8_t* file, uint32_t line); 305 #else 306 #define assert_param(expr) ((void)0U) 307 #endif /* USE_FULL_ASSERT */ 308 309 #ifdef __cplusplus 310 } 311 #endif 312 313 #endif /* __STM32L0xx_HAL_CONF_H */ 314 315 316 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 317