1 /** 2 ****************************************************************************** 3 * @file stm32l4xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> 9 * 10 * Redistribution and use in source and binary forms, with or without modification, 11 * are permitted provided that the following conditions are met: 12 * 1. Redistributions of source code must retain the above copyright notice, 13 * this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright notice, 15 * this list of conditions and the following disclaimer in the documentation 16 * and/or other materials provided with the distribution. 17 * 3. Neither the name of STMicroelectronics nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 ****************************************************************************** 33 */ 34 35 /* Define to prevent recursive inclusion -------------------------------------*/ 36 #ifndef __STM32L4xx_HAL_CONF_H 37 #define __STM32L4xx_HAL_CONF_H 38 39 #ifdef __cplusplus 40 extern "C" { 41 #endif 42 43 #include "main.h" 44 /* Exported types ------------------------------------------------------------*/ 45 /* Exported constants --------------------------------------------------------*/ 46 47 /* ########################## Module Selection ############################## */ 48 /** 49 * @brief This is the list of modules to be used in the HAL driver 50 */ 51 52 #define HAL_MODULE_ENABLED 53 /*#define HAL_ADC_MODULE_ENABLED */ 54 /*#define HAL_CRYP_MODULE_ENABLED */ 55 /*#define HAL_CAN_MODULE_ENABLED */ 56 /*#define HAL_COMP_MODULE_ENABLED */ 57 /*#define HAL_CRC_MODULE_ENABLED */ 58 /*#define HAL_CRYP_MODULE_ENABLED */ 59 /*#define HAL_DAC_MODULE_ENABLED */ 60 /*#define HAL_DCMI_MODULE_ENABLED */ 61 /*#define HAL_DMA2D_MODULE_ENABLED */ 62 /*#define HAL_DFSDM_MODULE_ENABLED */ 63 /*#define HAL_DSI_MODULE_ENABLED */ 64 /*#define HAL_FIREWALL_MODULE_ENABLED */ 65 /*#define HAL_GFXMMU_MODULE_ENABLED */ 66 /*#define HAL_HCD_MODULE_ENABLED */ 67 /*#define HAL_HASH_MODULE_ENABLED */ 68 /*#define HAL_I2S_MODULE_ENABLED */ 69 /*#define HAL_IRDA_MODULE_ENABLED */ 70 #define HAL_IWDG_MODULE_ENABLED 71 /*#define HAL_LTDC_MODULE_ENABLED */ 72 /*#define HAL_LCD_MODULE_ENABLED */ 73 /*#define HAL_LPTIM_MODULE_ENABLED */ 74 /*#define HAL_NAND_MODULE_ENABLED */ 75 /*#define HAL_NOR_MODULE_ENABLED */ 76 /*#define HAL_OPAMP_MODULE_ENABLED */ 77 /*#define HAL_OSPI_MODULE_ENABLED */ 78 /*#define HAL_OSPI_MODULE_ENABLED */ 79 /*#define HAL_PCD_MODULE_ENABLED */ 80 /*#define HAL_QSPI_MODULE_ENABLED */ 81 /*#define HAL_QSPI_MODULE_ENABLED */ 82 /*#define HAL_RNG_MODULE_ENABLED */ 83 #define HAL_RTC_MODULE_ENABLED 84 /*#define HAL_SAI_MODULE_ENABLED */ 85 /*#define HAL_SD_MODULE_ENABLED */ 86 /*#define HAL_SMBUS_MODULE_ENABLED */ 87 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 88 /*#define HAL_SPI_MODULE_ENABLED */ 89 /*#define HAL_SRAM_MODULE_ENABLED */ 90 /*#define HAL_SWPMI_MODULE_ENABLED */ 91 /*#define HAL_TIM_MODULE_ENABLED */ 92 /*#define HAL_TSC_MODULE_ENABLED */ 93 #define HAL_UART_MODULE_ENABLED 94 /*#define HAL_USART_MODULE_ENABLED */ 95 /*#define HAL_WWDG_MODULE_ENABLED */ 96 /*#define HAL_EXTI_MODULE_ENABLED */ 97 #define HAL_GPIO_MODULE_ENABLED 98 #define HAL_I2C_MODULE_ENABLED 99 #define HAL_DMA_MODULE_ENABLED 100 #define HAL_RCC_MODULE_ENABLED 101 #define HAL_FLASH_MODULE_ENABLED 102 #define HAL_PWR_MODULE_ENABLED 103 #define HAL_CORTEX_MODULE_ENABLED 104 105 /* ########################## Oscillator Values adaptation ####################*/ 106 /** 107 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 108 * This value is used by the RCC HAL module to compute the system frequency 109 * (when HSE is used as system clock source, directly or through the PLL). 110 */ 111 #if !defined (HSE_VALUE) 112 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ 113 #endif /* HSE_VALUE */ 114 115 #if !defined (HSE_STARTUP_TIMEOUT) 116 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ 117 #endif /* HSE_STARTUP_TIMEOUT */ 118 119 /** 120 * @brief Internal Multiple Speed oscillator (MSI) default value. 121 * This value is the default MSI range value after Reset. 122 */ 123 #if !defined (MSI_VALUE) 124 #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/ 125 #endif /* MSI_VALUE */ 126 /** 127 * @brief Internal High Speed oscillator (HSI) value. 128 * This value is used by the RCC HAL module to compute the system frequency 129 * (when HSI is used as system clock source, directly or through the PLL). 130 */ 131 #if !defined (HSI_VALUE) 132 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ 133 #endif /* HSI_VALUE */ 134 135 /** 136 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. 137 * This internal oscillator is mainly dedicated to provide a high precision clock to 138 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 139 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 140 * which is subject to manufacturing process variations. 141 */ 142 #if !defined (HSI48_VALUE) 143 #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. 144 The real value my vary depending on manufacturing process variations.*/ 145 #endif /* HSI48_VALUE */ 146 147 /** 148 * @brief Internal Low Speed oscillator (LSI) value. 149 */ 150 #if !defined (LSI_VALUE) 151 #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ 152 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 153 The real value may vary depending on the variations 154 in voltage and temperature.*/ 155 156 /** 157 * @brief External Low Speed oscillator (LSE) value. 158 * This value is used by the UART, RTC HAL module to compute the system frequency 159 */ 160 #if !defined (LSE_VALUE) 161 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 162 #endif /* LSE_VALUE */ 163 164 #if !defined (LSE_STARTUP_TIMEOUT) 165 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 166 #endif /* HSE_STARTUP_TIMEOUT */ 167 168 /** 169 * @brief External clock source for SAI1 peripheral 170 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 171 * frequency. 172 */ 173 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) 174 #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/ 175 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ 176 177 /** 178 * @brief External clock source for SAI2 peripheral 179 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 180 * frequency. 181 */ 182 #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) 183 #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)48000U) /*!< Value of the SAI2 External clock source in Hz*/ 184 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */ 185 186 /* Tip: To avoid modifying this file each time you need to use different HSE, 187 === you can define the HSE value in your toolchain compiler preprocessor. */ 188 189 /* ########################### System Configuration ######################### */ 190 /** 191 * @brief This is the HAL system configuration section 192 */ 193 194 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ 195 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ 196 #define USE_RTOS 0U 197 #define PREFETCH_ENABLE 0U 198 #define INSTRUCTION_CACHE_ENABLE 1U 199 #define DATA_CACHE_ENABLE 1U 200 201 /* ########################## Assert Selection ############################## */ 202 /** 203 * @brief Uncomment the line below to expanse the "assert_param" macro in the 204 * HAL drivers code 205 */ 206 /* #define USE_FULL_ASSERT 1U */ 207 208 /* ################## SPI peripheral configuration ########################## */ 209 210 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 211 * Activated: CRC code is present inside driver 212 * Deactivated: CRC code cleaned from driver 213 */ 214 215 #define USE_SPI_CRC 0U 216 217 /* Includes ------------------------------------------------------------------*/ 218 /** 219 * @brief Include module's header file 220 */ 221 222 #ifdef HAL_RCC_MODULE_ENABLED 223 #include "stm32l4xx_hal_rcc.h" 224 #include "stm32l4xx_hal_rcc_ex.h" 225 #endif /* HAL_RCC_MODULE_ENABLED */ 226 227 #ifdef HAL_EXTI_MODULE_ENABLED 228 #include "stm32l4xx_hal_exti.h" 229 #endif /* HAL_EXTI_MODULE_ENABLED */ 230 231 #ifdef HAL_GPIO_MODULE_ENABLED 232 #include "stm32l4xx_hal_gpio.h" 233 #endif /* HAL_GPIO_MODULE_ENABLED */ 234 235 #ifdef HAL_DMA_MODULE_ENABLED 236 #include "stm32l4xx_hal_dma.h" 237 #include "stm32l4xx_hal_dma_ex.h" 238 #endif /* HAL_DMA_MODULE_ENABLED */ 239 240 #ifdef HAL_DFSDM_MODULE_ENABLED 241 #include "stm32l4xx_hal_dfsdm.h" 242 #endif /* HAL_DFSDM_MODULE_ENABLED */ 243 244 #ifdef HAL_CORTEX_MODULE_ENABLED 245 #include "stm32l4xx_hal_cortex.h" 246 #endif /* HAL_CORTEX_MODULE_ENABLED */ 247 248 #ifdef HAL_ADC_MODULE_ENABLED 249 #include "stm32l4xx_hal_adc.h" 250 #endif /* HAL_ADC_MODULE_ENABLED */ 251 252 #ifdef HAL_CAN_MODULE_ENABLED 253 #include "stm32l4xx_hal_can.h" 254 #endif /* HAL_CAN_MODULE_ENABLED */ 255 256 #ifdef HAL_COMP_MODULE_ENABLED 257 #include "stm32l4xx_hal_comp.h" 258 #endif /* HAL_COMP_MODULE_ENABLED */ 259 260 #ifdef HAL_CRC_MODULE_ENABLED 261 #include "stm32l4xx_hal_crc.h" 262 #endif /* HAL_CRC_MODULE_ENABLED */ 263 264 #ifdef HAL_CRYP_MODULE_ENABLED 265 #include "stm32l4xx_hal_cryp.h" 266 #endif /* HAL_CRYP_MODULE_ENABLED */ 267 268 #ifdef HAL_DAC_MODULE_ENABLED 269 #include "stm32l4xx_hal_dac.h" 270 #endif /* HAL_DAC_MODULE_ENABLED */ 271 272 #ifdef HAL_DCMI_MODULE_ENABLED 273 #include "stm32l4xx_hal_dcmi.h" 274 #endif /* HAL_DCMI_MODULE_ENABLED */ 275 276 #ifdef HAL_DMA2D_MODULE_ENABLED 277 #include "stm32l4xx_hal_dma2d.h" 278 #endif /* HAL_DMA2D_MODULE_ENABLED */ 279 280 #ifdef HAL_DSI_MODULE_ENABLED 281 #include "stm32l4xx_hal_dsi.h" 282 #endif /* HAL_DSI_MODULE_ENABLED */ 283 284 #ifdef HAL_FIREWALL_MODULE_ENABLED 285 #include "stm32l4xx_hal_firewall.h" 286 #endif /* HAL_FIREWALL_MODULE_ENABLED */ 287 288 #ifdef HAL_FLASH_MODULE_ENABLED 289 #include "stm32l4xx_hal_flash.h" 290 #endif /* HAL_FLASH_MODULE_ENABLED */ 291 292 #ifdef HAL_HASH_MODULE_ENABLED 293 #include "stm32l4xx_hal_hash.h" 294 #endif /* HAL_HASH_MODULE_ENABLED */ 295 296 #ifdef HAL_SRAM_MODULE_ENABLED 297 #include "stm32l4xx_hal_sram.h" 298 #endif /* HAL_SRAM_MODULE_ENABLED */ 299 300 #ifdef HAL_NOR_MODULE_ENABLED 301 #include "stm32l4xx_hal_nor.h" 302 #endif /* HAL_NOR_MODULE_ENABLED */ 303 304 #ifdef HAL_NAND_MODULE_ENABLED 305 #include "stm32l4xx_hal_nand.h" 306 #endif /* HAL_NAND_MODULE_ENABLED */ 307 308 #ifdef HAL_I2C_MODULE_ENABLED 309 #include "stm32l4xx_hal_i2c.h" 310 #endif /* HAL_I2C_MODULE_ENABLED */ 311 312 #ifdef HAL_IWDG_MODULE_ENABLED 313 #include "stm32l4xx_hal_iwdg.h" 314 #endif /* HAL_IWDG_MODULE_ENABLED */ 315 316 #ifdef HAL_LCD_MODULE_ENABLED 317 #include "stm32l4xx_hal_lcd.h" 318 #endif /* HAL_LCD_MODULE_ENABLED */ 319 320 #ifdef HAL_LPTIM_MODULE_ENABLED 321 #include "stm32l4xx_hal_lptim.h" 322 #endif /* HAL_LPTIM_MODULE_ENABLED */ 323 324 #ifdef HAL_LTDC_MODULE_ENABLED 325 #include "stm32l4xx_hal_ltdc.h" 326 #endif /* HAL_LTDC_MODULE_ENABLED */ 327 328 #ifdef HAL_OPAMP_MODULE_ENABLED 329 #include "stm32l4xx_hal_opamp.h" 330 #endif /* HAL_OPAMP_MODULE_ENABLED */ 331 332 #ifdef HAL_OSPI_MODULE_ENABLED 333 #include "stm32l4xx_hal_ospi.h" 334 #endif /* HAL_OSPI_MODULE_ENABLED */ 335 336 #ifdef HAL_PWR_MODULE_ENABLED 337 #include "stm32l4xx_hal_pwr.h" 338 #endif /* HAL_PWR_MODULE_ENABLED */ 339 340 #ifdef HAL_QSPI_MODULE_ENABLED 341 #include "stm32l4xx_hal_qspi.h" 342 #endif /* HAL_QSPI_MODULE_ENABLED */ 343 344 #ifdef HAL_RNG_MODULE_ENABLED 345 #include "stm32l4xx_hal_rng.h" 346 #endif /* HAL_RNG_MODULE_ENABLED */ 347 348 #ifdef HAL_RTC_MODULE_ENABLED 349 #include "stm32l4xx_hal_rtc.h" 350 #endif /* HAL_RTC_MODULE_ENABLED */ 351 352 #ifdef HAL_SAI_MODULE_ENABLED 353 #include "stm32l4xx_hal_sai.h" 354 #endif /* HAL_SAI_MODULE_ENABLED */ 355 356 #ifdef HAL_SD_MODULE_ENABLED 357 #include "stm32l4xx_hal_sd.h" 358 #endif /* HAL_SD_MODULE_ENABLED */ 359 360 #ifdef HAL_SMBUS_MODULE_ENABLED 361 #include "stm32l4xx_hal_smbus.h" 362 #endif /* HAL_SMBUS_MODULE_ENABLED */ 363 364 #ifdef HAL_SPI_MODULE_ENABLED 365 #include "stm32l4xx_hal_spi.h" 366 #endif /* HAL_SPI_MODULE_ENABLED */ 367 368 #ifdef HAL_SWPMI_MODULE_ENABLED 369 #include "stm32l4xx_hal_swpmi.h" 370 #endif /* HAL_SWPMI_MODULE_ENABLED */ 371 372 #ifdef HAL_TIM_MODULE_ENABLED 373 #include "stm32l4xx_hal_tim.h" 374 #endif /* HAL_TIM_MODULE_ENABLED */ 375 376 #ifdef HAL_TSC_MODULE_ENABLED 377 #include "stm32l4xx_hal_tsc.h" 378 #endif /* HAL_TSC_MODULE_ENABLED */ 379 380 #ifdef HAL_UART_MODULE_ENABLED 381 #include "stm32l4xx_hal_uart.h" 382 #endif /* HAL_UART_MODULE_ENABLED */ 383 384 #ifdef HAL_USART_MODULE_ENABLED 385 #include "stm32l4xx_hal_usart.h" 386 #endif /* HAL_USART_MODULE_ENABLED */ 387 388 #ifdef HAL_IRDA_MODULE_ENABLED 389 #include "stm32l4xx_hal_irda.h" 390 #endif /* HAL_IRDA_MODULE_ENABLED */ 391 392 #ifdef HAL_SMARTCARD_MODULE_ENABLED 393 #include "stm32l4xx_hal_smartcard.h" 394 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 395 396 #ifdef HAL_WWDG_MODULE_ENABLED 397 #include "stm32l4xx_hal_wwdg.h" 398 #endif /* HAL_WWDG_MODULE_ENABLED */ 399 400 #ifdef HAL_PCD_MODULE_ENABLED 401 #include "stm32l4xx_hal_pcd.h" 402 #endif /* HAL_PCD_MODULE_ENABLED */ 403 404 #ifdef HAL_HCD_MODULE_ENABLED 405 #include "stm32l4xx_hal_hcd.h" 406 #endif /* HAL_HCD_MODULE_ENABLED */ 407 408 #ifdef HAL_GFXMMU_MODULE_ENABLED 409 #include "stm32l4xx_hal_gfxmmu.h" 410 #endif /* HAL_GFXMMU_MODULE_ENABLED */ 411 412 /* Exported macro ------------------------------------------------------------*/ 413 #ifdef USE_FULL_ASSERT 414 /** 415 * @brief The assert_param macro is used for function's parameters check. 416 * @param expr: If expr is false, it calls assert_failed function 417 * which reports the name of the source file and the source 418 * line number of the call that failed. 419 * If expr is true, it returns no value. 420 * @retval None 421 */ 422 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 423 /* Exported functions ------------------------------------------------------- */ 424 void assert_failed(uint8_t* file, uint32_t line); 425 #else 426 #define assert_param(expr) ((void)0U) 427 #endif /* USE_FULL_ASSERT */ 428 429 #ifdef __cplusplus 430 } 431 #endif 432 433 #endif /* __STM32L4xx_HAL_CONF_H */ 434 435 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 436