1 /** 2 ****************************************************************************** 3 * @file stm32mp1xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© Copyright (c) 2020 STMicroelectronics. 9 * All rights reserved.</center></h2> 10 * 11 * This software component is licensed by ST under BSD 3-Clause license, 12 * the "License"; You may not use this file except in compliance with the 13 * License. You may obtain a copy of the License at: 14 * opensource.org/licenses/BSD-3-Clause 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32MP1xx_HAL_CONF_H 21 #define STM32MP1xx_HAL_CONF_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Exported types ------------------------------------------------------------*/ 28 /* Exported constants --------------------------------------------------------*/ 29 30 /* ########################## Module Selection ############################## */ 31 /** 32 * @brief This is the list of modules to be used in the HAL driver 33 */ 34 #define HAL_MODULE_ENABLED 35 #define HAL_ADC_MODULE_ENABLED 36 /*#define HAL_CEC_MODULE_ENABLED */ 37 #define HAL_CRC_MODULE_ENABLED 38 #define HAL_CRYP_MODULE_ENABLED 39 #define HAL_DAC_MODULE_ENABLED 40 /*#define HAL_DCMI_MODULE_ENABLED */ 41 /*#define HAL_DSI_MODULE_ENABLED */ 42 /*#define HAL_DFSDM_MODULE_ENABLED */ 43 /*#define HAL_DTS_MODULE_ENABLED */ 44 /*#define HAL_ETH_MODULE_ENABLED */ 45 /*#define HAL_FDCAN_MODULE_ENABLED */ 46 #define HAL_HASH_MODULE_ENABLED 47 /*#define HAL_HCD_MODULE_ENABLED */ 48 #define HAL_HSEM_MODULE_ENABLED 49 #define HAL_I2C_MODULE_ENABLED 50 /*#define HAL_I2S_MODULE_ENABLED */ 51 #define HAL_IPCC_MODULE_ENABLED 52 /*#define HAL_IWDG_MODULE_ENABLED */ 53 #define HAL_LPTIM_MODULE_ENABLED 54 /*#define HAL_LTDC_MODULE_ENABLED */ 55 /*#define HAL_NAND_MODULE_ENABLED */ 56 /*#define HAL_NOR_MODULE_ENABLED */ 57 /*#define HAL_PCD_MODULE_ENABLED */ 58 /*#define HAL_QSPI_MODULE_ENABLED */ 59 #define HAL_RNG_MODULE_ENABLED 60 #define HAL_SAI_MODULE_ENABLED 61 #define HAL_SD_MODULE_ENABLED 62 /*#define HAL_MMC_MODULE_ENABLED */ 63 #define HAL_RTC_MODULE_ENABLED 64 /*#define HAL_SMBUS_MODULE_ENABLED */ 65 /*#define HAL_SPDIFRX_MODULE_ENABLED */ 66 #define HAL_SPI_MODULE_ENABLED 67 /*#define HAL_SRAM_MODULE_ENABLED */ 68 /*#define HAL_TAMP_MODULE_ENABLED */ 69 #define HAL_TIM_MODULE_ENABLED 70 #define HAL_UART_MODULE_ENABLED 71 /*#define HAL_USART_MODULE_ENABLED */ 72 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 73 #define HAL_WWDG_MODULE_ENABLED 74 #define HAL_GPIO_MODULE_ENABLED 75 #define HAL_EXTI_MODULE_ENABLED 76 #define HAL_DMA_MODULE_ENABLED 77 #define HAL_MDMA_MODULE_ENABLED 78 #define HAL_RCC_MODULE_ENABLED 79 #define HAL_PWR_MODULE_ENABLED 80 #define HAL_CORTEX_MODULE_ENABLED 81 82 /* ########################## Register Callbacks selection ############################## */ 83 /** 84 * @brief This is the list of modules where register callback can be used 85 */ 86 #define USE_HAL_ADC_REGISTER_CALLBACKS 0u 87 #define USE_HAL_CEC_REGISTER_CALLBACKS 0u 88 #define USE_HAL_DAC_REGISTER_CALLBACKS 0u 89 #define USE_HAL_I2C_REGISTER_CALLBACKS 0u 90 #define USE_HAL_RNG_REGISTER_CALLBACKS 0u 91 #define USE_HAL_SPI_REGISTER_CALLBACKS 0u 92 #define USE_HAL_UART_REGISTER_CALLBACKS 0u 93 #define USE_HAL_USART_REGISTER_CALLBACKS 0u 94 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u 95 96 /* ########################## Oscillator Values adaptation ####################*/ 97 /** 98 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 99 * This value is used by the RCC HAL module to compute the system frequency 100 * (when HSE is used as system clock source, directly or through the PLL). 101 */ 102 #if !defined (HSE_VALUE) 103 #define HSE_VALUE (24000000U) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */ 104 #endif /* HSE_VALUE */ 105 106 #if !defined (HSE_STARTUP_TIMEOUT) 107 #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ 108 #endif /* HSE_STARTUP_TIMEOUT */ 109 110 /** 111 * @brief Internal High Speed oscillator (HSI) value. 112 * This value is used by the RCC HAL module to compute the system frequency 113 * (when HSI is used as system clock source, directly or through the PLL). 114 */ 115 #if !defined (HSI_VALUE) 116 #define HSI_VALUE (64000000U) /*!< Value of the Internal oscillator in Hz*/ 117 #endif /* HSI_VALUE */ 118 119 /** 120 * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 121 * Timeout value 122 */ 123 #if !defined (HSI_STARTUP_TIMEOUT) 124 #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ 125 #endif /* HSI_STARTUP_TIMEOUT */ 126 127 /** 128 * @brief Internal Low Speed oscillator (LSI) value. 129 */ 130 #if !defined (LSI_VALUE) 131 #define LSI_VALUE 32000U 132 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 133 The real value may vary depending on the variations 134 in voltage and temperature. */ 135 136 /** 137 * @brief External Low Speed oscillator (LSE) value. 138 * This value is used by the UART, RTC HAL module to compute the system frequency 139 */ 140 #if !defined (LSE_VALUE) 141 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 142 #endif /* LSE_VALUE */ 143 144 #if !defined (LSE_STARTUP_TIMEOUT) 145 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 146 #endif /* LSE_STARTUP_TIMEOUT */ 147 148 /** 149 * @brief Internal oscillator (CSI) default value. 150 * This value is the default CSI value after Reset. 151 */ 152 #if !defined (CSI_VALUE) 153 #define CSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ 154 #endif /* CSI_VALUE */ 155 156 /** 157 * @brief External clock source for I2S peripheral 158 * This value is used by the I2S HAL module to compute the I2S clock source 159 * frequency, this source is inserted directly through I2S_CKIN pad. 160 */ 161 #if !defined (EXTERNAL_CLOCK_VALUE) 162 #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ 163 #endif /* EXTERNAL_CLOCK_VALUE */ 164 165 /* Tip: To avoid modifying this file each time you need to use different HSE, 166 === you can define the HSE value in your toolchain compiler preprocessor. */ 167 168 /* ########################### System Configuration ######################### */ 169 /** 170 * @brief This is the HAL system configuration section 171 */ 172 #define VDD_VALUE 3300U /*!< Value of VDD in mv */ 173 #define TICK_INT_PRIORITY 0U /*!< tick interrupt priority (lowest by default) */ 174 /* Warning: Must be set to higher priority for HAL_Delay() */ 175 /* and HAL_GetTick() usage under interrupt context */ 176 #define USE_RTOS 0U 177 #define PREFETCH_ENABLE 0U 178 #define INSTRUCTION_CACHE_ENABLE 0U 179 #define DATA_CACHE_ENABLE 0U 180 181 /* ########################## Assert Selection ############################## */ 182 /** 183 * @brief Uncomment the line below to expanse the "assert_param" macro in the 184 * HAL drivers code 185 */ 186 /* #define USE_FULL_ASSERT 1U */ 187 188 /* Includes ------------------------------------------------------------------*/ 189 /** 190 * @brief Include module's header file 191 */ 192 193 #ifdef HAL_RCC_MODULE_ENABLED 194 #include "stm32mp1xx_hal_rcc.h" 195 #endif /* HAL_RCC_MODULE_ENABLED */ 196 197 #ifdef HAL_EXTI_MODULE_ENABLED 198 #include "stm32mp1xx_hal_exti.h" 199 #endif /* HAL_EXTI_MODULE_ENABLED */ 200 201 #ifdef HAL_GPIO_MODULE_ENABLED 202 #include "stm32mp1xx_hal_gpio.h" 203 #endif /* HAL_GPIO_MODULE_ENABLED */ 204 205 #ifdef HAL_HSEM_MODULE_ENABLED 206 #include "stm32mp1xx_hal_hsem.h" 207 #endif /* HAL_HSEM_MODULE_ENABLED */ 208 209 #ifdef HAL_DMA_MODULE_ENABLED 210 #include "stm32mp1xx_hal_dma.h" 211 #endif /* HAL_DMA_MODULE_ENABLED */ 212 213 #ifdef HAL_MDMA_MODULE_ENABLED 214 #include "stm32mp1xx_hal_mdma.h" 215 #endif /* HAL_MDMA_MODULE_ENABLED */ 216 217 #ifdef HAL_CORTEX_MODULE_ENABLED 218 #include "stm32mp1xx_hal_cortex.h" 219 #endif /* HAL_CORTEX_MODULE_ENABLED */ 220 221 #ifdef HAL_ADC_MODULE_ENABLED 222 #include "stm32mp1xx_hal_adc.h" 223 #endif /* HAL_ADC_MODULE_ENABLED */ 224 225 #ifdef HAL_CEC_MODULE_ENABLED 226 #include "stm32mp1xx_hal_cec.h" 227 #endif /* HAL_CEC_MODULE_ENABLED */ 228 229 #ifdef HAL_CRC_MODULE_ENABLED 230 #include "stm32mp1xx_hal_crc.h" 231 #endif /* HAL_CRC_MODULE_ENABLED */ 232 233 #ifdef HAL_CRYP_MODULE_ENABLED 234 #include "stm32mp1xx_hal_cryp.h" 235 #endif /* HAL_CRYP_MODULE_ENABLED */ 236 237 #ifdef HAL_DAC_MODULE_ENABLED 238 #include "stm32mp1xx_hal_dac.h" 239 #endif /* HAL_DAC_MODULE_ENABLED */ 240 241 #ifdef HAL_DCMI_MODULE_ENABLED 242 #include "stm32mp1xx_hal_dcmi.h" 243 #endif /* HAL_DCMI_MODULE_ENABLED */ 244 245 #ifdef HAL_DFSDM_MODULE_ENABLED 246 #include "stm32mp1xx_hal_dfsdm.h" 247 #endif /* HAL_DFSDM_MODULE_ENABLED */ 248 249 #ifdef HAL_DSI_MODULE_ENABLED 250 #include "stm32mp1xx_hal_dsi.h" 251 #endif /* HAL_DSI_MODULE_ENABLED */ 252 253 #ifdef HAL_ETH_MODULE_ENABLED 254 #include "stm32mp1xx_hal_eth.h" 255 #endif /* HAL_ETH_MODULE_ENABLED */ 256 257 #ifdef HAL_FDCAN_MODULE_ENABLED 258 #include "stm32mp1xx_hal_fdcan.h" 259 #endif /* HAL_FDCAN_MODULE_ENABLED */ 260 261 #ifdef HAL_HASH_MODULE_ENABLED 262 #include "stm32mp1xx_hal_hash.h" 263 #endif /* HAL_HASH_MODULE_ENABLED */ 264 265 #ifdef HAL_HCD_MODULE_ENABLED 266 #include "stm32mp1xx_hal_hcd.h" 267 #endif /* HAL_HASH_MODULE_ENABLED */ 268 269 #ifdef HAL_I2C_MODULE_ENABLED 270 #include "stm32mp1xx_hal_i2c.h" 271 #endif /* HAL_I2C_MODULE_ENABLED */ 272 273 #ifdef HAL_I2S_MODULE_ENABLED 274 #include "stm32mp1xx_hal_i2s.h" 275 #endif /* HAL_I2S_MODULE_ENABLED */ 276 277 #ifdef HAL_IPCC_MODULE_ENABLED 278 #include "stm32mp1xx_hal_ipcc.h" 279 #endif /* HAL_IPCC_MODULE_ENABLED */ 280 281 #ifdef HAL_IWDG_MODULE_ENABLED 282 #include "stm32mp1xx_hal_iwdg.h" 283 #endif /* HAL_IWDG_MODULE_ENABLED */ 284 285 #ifdef HAL_IWDG_MODULE_ENABLED 286 #include "stm32mp1xx_hal_iwdg.h" 287 #endif /* HAL_IWDG_MODULE_ENABLED */ 288 289 #ifdef HAL_LPTIM_MODULE_ENABLED 290 #include "stm32mp1xx_hal_lptim.h" 291 #endif /* HAL_LPTIM_MODULE_ENABLED */ 292 293 #ifdef HAL_LTDC_MODULE_ENABLED 294 #include "stm32mp1xx_hal_ltdc.h" 295 #endif /* HAL_LTDC_MODULE_ENABLED */ 296 297 #ifdef HAL_NAND_MODULE_ENABLED 298 #include "stm32mp1xx_hal_nand.h" 299 #endif /* HAL_NAND_MODULE_ENABLED */ 300 301 #ifdef HAL_NOR_MODULE_ENABLED 302 #include "stm32mp1xx_hal_nor.h" 303 #endif /* HAL_NOR_MODULE_ENABLED */ 304 305 #ifdef HAL_PCD_MODULE_ENABLED 306 #include "stm32mp1xx_hal_pcd.h" 307 #endif /* HAL_PCD_MODULE_ENABLED */ 308 309 #ifdef HAL_PWR_MODULE_ENABLED 310 #include "stm32mp1xx_hal_pwr.h" 311 #endif /* HAL_PWR_MODULE_ENABLED */ 312 313 #ifdef HAL_QSPI_MODULE_ENABLED 314 #include "stm32mp1xx_hal_qspi.h" 315 #endif /* HAL_QSPI_MODULE_ENABLED */ 316 317 #ifdef HAL_RNG_MODULE_ENABLED 318 #include "stm32mp1xx_hal_rng.h" 319 #endif /* HAL_RNG_MODULE_ENABLED */ 320 321 #ifdef HAL_SAI_MODULE_ENABLED 322 #include "stm32mp1xx_hal_sai.h" 323 #endif /* HAL_SAI_MODULE_ENABLED */ 324 325 #ifdef HAL_SD_MODULE_ENABLED 326 #include "stm32mp1xx_hal_sd.h" 327 #endif /* HAL_SD_MODULE_ENABLED */ 328 329 #ifdef HAL_SMARTCARD_MODULE_ENABLED 330 #include "stm32mp1xx_hal_smartcard.h" 331 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 332 333 #ifdef HAL_SMBUS_MODULE_ENABLED 334 #include "stm32mp1xx_hal_smbus.h" 335 #endif /* HAL_SMBUS_MODULE_ENABLED */ 336 337 #ifdef HAL_SPDIFRX_MODULE_ENABLED 338 #include "stm32mp1xx_hal_spdifrx.h" 339 #endif /* HAL_SPDIFRX_MODULE_ENABLED */ 340 341 #ifdef HAL_SPI_MODULE_ENABLED 342 #include "stm32mp1xx_hal_spi.h" 343 #endif /* HAL_SPI_MODULE_ENABLED */ 344 345 #ifdef HAL_SRAM_MODULE_ENABLED 346 #include "stm32mp1xx_hal_sram.h" 347 #endif /* HAL_SRAM_MODULE_ENABLED */ 348 349 #ifdef HAL_RTC_MODULE_ENABLED 350 #include "stm32mp1xx_hal_rtc.h" 351 #endif /* HAL_RTC_MODULE_ENABLED */ 352 353 #ifdef HAL_TAMP_MODULE_ENABLED 354 #include "stm32mp1xx_hal_tamp.h" 355 #endif /* HAL_TAMP_MODULE_ENABLED */ 356 357 #ifdef HAL_TIM_MODULE_ENABLED 358 #include "stm32mp1xx_hal_tim.h" 359 #endif /* HAL_TIM_MODULE_ENABLED */ 360 361 #ifdef HAL_UART_MODULE_ENABLED 362 #include "stm32mp1xx_hal_uart.h" 363 #endif /* HAL_UART_MODULE_ENABLED */ 364 365 #ifdef HAL_USART_MODULE_ENABLED 366 #include "stm32mp1xx_hal_usart.h" 367 #endif /* HAL_USART_MODULE_ENABLED */ 368 369 #ifdef HAL_WWDG_MODULE_ENABLED 370 #include "stm32mp1xx_hal_wwdg.h" 371 #endif /* HAL_WWDG_MODULE_ENABLED */ 372 373 /* Exported macro ------------------------------------------------------------*/ 374 #ifdef USE_FULL_ASSERT 375 /** 376 * @brief The assert_param macro is used for function's parameters check. 377 * @param expr: If expr is false, it calls assert_failed function 378 * which reports the name of the source file and the source 379 * line number of the call that failed. 380 * If expr is true, it returns no value. 381 * @retval None 382 */ 383 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 384 /* Exported functions ------------------------------------------------------- */ 385 void assert_failed(uint8_t* file, uint32_t line); 386 #else 387 #define assert_param(expr) ((void)0U) 388 #endif /* USE_FULL_ASSERT */ 389 390 #ifdef __cplusplus 391 } 392 #endif 393 394 #endif /* STM32MP1xx_HAL_CONF_H */ 395 396 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 397