1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2011 Freescale Semiconductor, Inc
4 * Andy Fleming
5 */
6
7 /*
8 * MDIO Commands
9 */
10
11 #include <command.h>
12 #include <dm.h>
13 #include <miiphy.h>
14 #include <phy.h>
15
16 static char last_op[2];
17 static uint last_data;
18 static uint last_addr_lo;
19 static uint last_addr_hi;
20 static uint last_devad_lo;
21 static uint last_devad_hi;
22 static uint last_reg_lo;
23 static uint last_reg_hi;
24
extract_range(char * input,int * plo,int * phi)25 static int extract_range(char *input, int *plo, int *phi)
26 {
27 char *end;
28 *plo = simple_strtol(input, &end, 16);
29 if (end == input)
30 return -1;
31
32 if ((*end == '-') && *(++end))
33 *phi = simple_strtol(end, NULL, 16);
34 else if (*end == '\0')
35 *phi = *plo;
36 else
37 return -1;
38
39 return 0;
40 }
41
mdio_write_ranges(struct mii_dev * bus,int addrlo,int addrhi,int devadlo,int devadhi,int reglo,int reghi,unsigned short data,int extended)42 static int mdio_write_ranges(struct mii_dev *bus,
43 int addrlo,
44 int addrhi, int devadlo, int devadhi,
45 int reglo, int reghi, unsigned short data,
46 int extended)
47 {
48 struct phy_device *phydev;
49 int addr, devad, reg;
50 int err = 0;
51
52 for (addr = addrlo; addr <= addrhi; addr++) {
53 phydev = bus->phymap[addr];
54
55 for (devad = devadlo; devad <= devadhi; devad++) {
56 for (reg = reglo; reg <= reghi; reg++) {
57 if (!phydev)
58 err = bus->write(bus, addr, devad,
59 reg, data);
60 else if (!extended)
61 err = phy_write_mmd(phydev, devad,
62 reg, data);
63 else
64 err = phydev->drv->writeext(phydev,
65 addr, devad, reg, data);
66
67 if (err)
68 goto err_out;
69 }
70 }
71 }
72
73 err_out:
74 return err;
75 }
76
mdio_read_ranges(struct mii_dev * bus,int addrlo,int addrhi,int devadlo,int devadhi,int reglo,int reghi,int extended)77 static int mdio_read_ranges(struct mii_dev *bus,
78 int addrlo,
79 int addrhi, int devadlo, int devadhi,
80 int reglo, int reghi, int extended)
81 {
82 int addr, devad, reg;
83 struct phy_device *phydev;
84
85 printf("Reading from bus %s\n", bus->name);
86 for (addr = addrlo; addr <= addrhi; addr++) {
87 phydev = bus->phymap[addr];
88 printf("PHY at address %x:\n", addr);
89
90 for (devad = devadlo; devad <= devadhi; devad++) {
91 for (reg = reglo; reg <= reghi; reg++) {
92 int val;
93
94 if (!phydev)
95 val = bus->read(bus, addr, devad, reg);
96 else if (!extended)
97 val = phy_read_mmd(phydev, devad, reg);
98 else
99 val = phydev->drv->readext(phydev, addr,
100 devad, reg);
101
102 if (val < 0) {
103 printf("Error\n");
104
105 return val;
106 }
107
108 if (devad >= 0)
109 printf("%d.", devad);
110
111 printf("%d - 0x%x\n", reg, val & 0xffff);
112 }
113 }
114 }
115
116 return 0;
117 }
118
119 /* The register will be in the form [a[-b].]x[-y] */
extract_reg_range(char * input,int * devadlo,int * devadhi,int * reglo,int * reghi)120 static int extract_reg_range(char *input, int *devadlo, int *devadhi,
121 int *reglo, int *reghi)
122 {
123 char *regstr;
124
125 /* use strrchr to find the last string after a '.' */
126 regstr = strrchr(input, '.');
127
128 /* If it exists, extract the devad(s) */
129 if (regstr) {
130 char devadstr[32];
131
132 strncpy(devadstr, input, regstr - input);
133 devadstr[regstr - input] = '\0';
134
135 if (extract_range(devadstr, devadlo, devadhi))
136 return -1;
137
138 regstr++;
139 } else {
140 /* Otherwise, we have no devad, and we just got regs */
141 *devadlo = *devadhi = MDIO_DEVAD_NONE;
142
143 regstr = input;
144 }
145
146 return extract_range(regstr, reglo, reghi);
147 }
148
extract_phy_range(char * const argv[],int argc,struct mii_dev ** bus,struct phy_device ** phydev,int * addrlo,int * addrhi)149 static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
150 struct phy_device **phydev,
151 int *addrlo, int *addrhi)
152 {
153 struct phy_device *dev = *phydev;
154
155 if ((argc < 1) || (argc > 2))
156 return -1;
157
158 /* If there are two arguments, it's busname addr */
159 if (argc == 2) {
160 *bus = miiphy_get_dev_by_name(argv[0]);
161
162 if (!*bus)
163 return -1;
164
165 return extract_range(argv[1], addrlo, addrhi);
166 }
167
168 /* It must be one argument, here */
169
170 /*
171 * This argument can be one of two things:
172 * 1) Ethernet device name
173 * 2) Just an address (use the previously-used bus)
174 *
175 * We check all buses for a PHY which is connected to an ethernet
176 * device by the given name. If none are found, we call
177 * extract_range() on the string, and see if it's an address range.
178 */
179 dev = mdio_phydev_for_ethname(argv[0]);
180
181 if (dev) {
182 *addrlo = *addrhi = dev->addr;
183 *bus = dev->bus;
184
185 return 0;
186 }
187
188 /* It's an address or nothing useful */
189 return extract_range(argv[0], addrlo, addrhi);
190 }
191
192 /* ---------------------------------------------------------------- */
do_mdio(struct cmd_tbl * cmdtp,int flag,int argc,char * const argv[])193 static int do_mdio(struct cmd_tbl *cmdtp, int flag, int argc,
194 char *const argv[])
195 {
196 char op[2];
197 int addrlo, addrhi, reglo, reghi, devadlo, devadhi;
198 unsigned short data;
199 int pos = argc - 1;
200 struct mii_dev *bus;
201 struct phy_device *phydev = NULL;
202 int extended = 0;
203
204 if (argc < 2)
205 return CMD_RET_USAGE;
206
207 #ifdef CONFIG_DM_MDIO
208 /* probe DM MII device before any operation so they are all accesible */
209 dm_mdio_probe_devices();
210 #endif
211
212 /*
213 * We use the last specified parameters, unless new ones are
214 * entered.
215 */
216 op[0] = argv[1][0];
217 addrlo = last_addr_lo;
218 addrhi = last_addr_hi;
219 devadlo = last_devad_lo;
220 devadhi = last_devad_hi;
221 reglo = last_reg_lo;
222 reghi = last_reg_hi;
223 data = last_data;
224
225 bus = mdio_get_current_dev();
226
227 if (flag & CMD_FLAG_REPEAT)
228 op[0] = last_op[0];
229
230 if (strlen(argv[1]) > 1) {
231 op[1] = argv[1][1];
232 if (op[1] == 'x') {
233 phydev = mdio_phydev_for_ethname(argv[2]);
234
235 if (phydev) {
236 addrlo = phydev->addr;
237 addrhi = addrlo;
238 bus = phydev->bus;
239 extended = 1;
240 } else {
241 return CMD_RET_FAILURE;
242 }
243
244 if (!phydev->drv ||
245 (!phydev->drv->writeext && (op[0] == 'w')) ||
246 (!phydev->drv->readext && (op[0] == 'r'))) {
247 puts("PHY does not have extended functions\n");
248 return CMD_RET_FAILURE;
249 }
250 }
251 }
252
253 switch (op[0]) {
254 case 'w':
255 if (pos > 1)
256 data = hextoul(argv[pos--], NULL);
257 /* Intentional fall-through - Get reg for read and write */
258 case 'r':
259 if (pos > 1)
260 if (extract_reg_range(argv[pos--], &devadlo, &devadhi,
261 ®lo, ®hi))
262 return CMD_RET_FAILURE;
263 /* Intentional fall-through - Get phy for all commands */
264 default:
265 if (pos > 1)
266 if (extract_phy_range(&argv[2], pos - 1, &bus,
267 &phydev, &addrlo, &addrhi))
268 return CMD_RET_FAILURE;
269
270 break;
271 }
272
273 if (!bus) {
274 puts("No MDIO bus found\n");
275 return CMD_RET_FAILURE;
276 }
277
278 if (op[0] == 'l') {
279 mdio_list_devices();
280
281 return 0;
282 }
283
284 /* Save the chosen bus */
285 miiphy_set_current_dev(bus->name);
286
287 switch (op[0]) {
288 case 'w':
289 mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi,
290 reglo, reghi, data, extended);
291 break;
292
293 case 'r':
294 mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi,
295 reglo, reghi, extended);
296 break;
297 }
298
299 /*
300 * Save the parameters for repeats.
301 */
302 last_op[0] = op[0];
303 last_addr_lo = addrlo;
304 last_addr_hi = addrhi;
305 last_devad_lo = devadlo;
306 last_devad_hi = devadhi;
307 last_reg_lo = reglo;
308 last_reg_hi = reghi;
309 last_data = data;
310
311 return 0;
312 }
313
314 /***************************************************/
315
316 U_BOOT_CMD(
317 mdio, 6, 1, do_mdio,
318 "MDIO utility commands",
319 "list - List MDIO buses\n"
320 "mdio read <phydev> [<devad>.]<reg> - "
321 "read PHY's register at <devad>.<reg>\n"
322 "mdio write <phydev> [<devad>.]<reg> <data> - "
323 "write PHY's register at <devad>.<reg>\n"
324 "mdio rx <phydev> [<devad>.]<reg> - "
325 "read PHY's extended register at <devad>.<reg>\n"
326 "mdio wx <phydev> [<devad>.]<reg> <data> - "
327 "write PHY's extended register at <devad>.<reg>\n"
328 "<phydev> may be:\n"
329 " <busname> <addr>\n"
330 " <addr>\n"
331 " <eth name>\n"
332 "<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n"
333 );
334