1 /* hci_core.h - Bluetooth HCI core access */
2 
3 /*
4  * Copyright (c) 2021-2025 Nordic Semiconductor ASA
5  * Copyright (c) 2015-2016 Intel Corporation
6  *
7  * SPDX-License-Identifier: Apache-2.0
8  */
9 #include <stdbool.h>
10 #include <stdint.h>
11 
12 #include <zephyr/autoconf.h>
13 #include <zephyr/bluetooth/addr.h>
14 #include <zephyr/bluetooth/bluetooth.h>
15 #include <zephyr/bluetooth/conn.h>
16 #include <zephyr/bluetooth/hci_types.h>
17 #include <zephyr/devicetree.h>
18 #include <zephyr/kernel.h>
19 #include <zephyr/net_buf.h>
20 #include <zephyr/sys/atomic.h>
21 #include <zephyr/sys/slist.h>
22 #include <zephyr/sys/util_macro.h>
23 
24 /* LL connection parameters */
25 #define LE_CONN_LATENCY		0x0000
26 #define LE_CONN_TIMEOUT		0x002a
27 
28 #if defined(CONFIG_BT_CLASSIC)
29 #define LMP_FEAT_PAGES_COUNT	3
30 #else
31 #define LMP_FEAT_PAGES_COUNT	1
32 #endif
33 
34 /* SCO  settings */
35 #define BT_VOICE_CVSD_16BIT     0x0060
36 
37 /* k_poll event tags */
38 enum {
39 	BT_EVENT_CMD_TX,
40 	BT_EVENT_CONN_TX_QUEUE,
41 	BT_EVENT_CONN_FREE_TX,
42 };
43 
44 /* bt_dev flags: the flags defined here represent BT controller state */
45 enum {
46 	BT_DEV_ENABLE,
47 	BT_DEV_DISABLE,
48 	BT_DEV_READY,
49 	BT_DEV_PRESET_ID,
50 	BT_DEV_HAS_PUB_KEY,
51 
52 	/** The application either explicitly or implicitly instructed the stack to scan
53 	 * for advertisers.
54 	 *
55 	 * Examples of such cases
56 	 *  - Explicit scanning, @ref BT_LE_SCAN_USER_EXPLICIT_SCAN.
57 	 *  - The application instructed the stack to automatically connect if a given device
58 	 *    is detected.
59 	 *  - The application wants to connect to a peer device using private addresses, but
60 	 *    the controller resolving list is too small. The host will fallback to using
61 	 *    host-based privacy and first scan for the device before it initiates a connection.
62 	 *  - The application wants to synchronize to a periodic advertiser.
63 	 *    The host will implicitly start scanning if it is not already doing so.
64 	 *
65 	 * The host needs to keep track of this state to ensure it can restart scanning
66 	 * when a connection is established/lost, explicit scanning is started or stopped etc.
67 	 * Also, when the scanner and advertiser share the same identity, the scanner may need
68 	 * to be restarted upon RPA refresh.
69 	 */
70 	BT_DEV_SCANNING,
71 
72 	/**
73 	 * Scanner is configured with a timeout.
74 	 */
75 	BT_DEV_SCAN_LIMITED,
76 
77 	BT_DEV_INITIATING,
78 
79 	BT_DEV_RPA_VALID,
80 	BT_DEV_RPA_TIMEOUT_CHANGED,
81 
82 	BT_DEV_ID_PENDING,
83 	BT_DEV_STORE_ID,
84 
85 #if defined(CONFIG_BT_CLASSIC)
86 	BT_DEV_ISCAN,
87 	BT_DEV_PSCAN,
88 	BT_DEV_INQUIRY,
89 	BT_DEV_LIMITED_DISCOVERABLE_MODE,
90 #endif /* CONFIG_BT_CLASSIC */
91 
92 	/* Total number of flags - must be at the end of the enum */
93 	BT_DEV_NUM_FLAGS,
94 };
95 
96 /* Flags which should not be cleared upon HCI_Reset */
97 #define BT_DEV_PERSISTENT_FLAGS (BIT(BT_DEV_ENABLE) | \
98 				 BIT(BT_DEV_PRESET_ID) | \
99 				 BIT(BT_DEV_DISABLE))
100 
101 #if defined(CONFIG_BT_EXT_ADV_LEGACY_SUPPORT)
102 /* Check the feature bit for extended or legacy advertising commands */
103 #define BT_DEV_FEAT_LE_EXT_ADV(feat) BT_FEAT_LE_EXT_ADV(feat)
104 #else
105 /* Always use extended advertising commands. */
106 #define BT_DEV_FEAT_LE_EXT_ADV(feat)  1
107 #endif
108 
109 enum {
110 	/* Advertising set has been created in the host. */
111 	BT_ADV_CREATED,
112 	/* Advertising parameters has been set in the controller.
113 	 * This implies that the advertising set has been created in the
114 	 * controller.
115 	 */
116 	BT_ADV_PARAMS_SET,
117 	/* Advertising data has been set in the controller. */
118 	BT_ADV_DATA_SET,
119 	/* Advertising random address pending to be set in the controller. */
120 	BT_ADV_RANDOM_ADDR_PENDING,
121 	/* The private random address of the advertiser is valid for this cycle
122 	 * of the RPA timeout.
123 	 */
124 	BT_ADV_RPA_VALID,
125 	/* The private random address of the advertiser is being updated. */
126 	BT_ADV_RPA_UPDATE,
127 	/* The advertiser set is limited by a timeout, or number of advertising
128 	 * events, or both.
129 	 */
130 	BT_ADV_LIMITED,
131 	/* Advertiser set is currently advertising in the controller. */
132 	BT_ADV_ENABLED,
133 	/* Advertiser set is connectable */
134 	BT_ADV_CONNECTABLE,
135 	/* Advertiser set is scannable */
136 	BT_ADV_SCANNABLE,
137 	/* Advertiser set is using extended advertising */
138 	BT_ADV_EXT_ADV,
139 	/* Advertiser set has disabled the use of private addresses and is using
140 	 * the identity address instead.
141 	 */
142 	BT_ADV_USE_IDENTITY,
143 	/* Advertiser has been configured to keep advertising after a connection
144 	 * has been established as long as there are connections available.
145 	 */
146 	BT_ADV_PERSIST,
147 	/* Advertiser has been temporarily disabled. */
148 	BT_ADV_PAUSED,
149 	/* Periodic Advertising has been enabled in the controller. */
150 	BT_PER_ADV_ENABLED,
151 	/* Periodic Advertising parameters has been set in the controller. */
152 	BT_PER_ADV_PARAMS_SET,
153 	/* Periodic Advertising to include AdvDataInfo (ADI) */
154 	BT_PER_ADV_INCLUDE_ADI,
155 	/* Constant Tone Extension parameters for Periodic Advertising
156 	 * has been set in the controller.
157 	 */
158 	BT_PER_ADV_CTE_PARAMS_SET,
159 	/* Constant Tone Extension for Periodic Advertising has been enabled
160 	 * in the controller.
161 	 */
162 	BT_PER_ADV_CTE_ENABLED,
163 
164 	BT_ADV_NUM_FLAGS,
165 };
166 
167 struct bt_le_ext_adv {
168 	/* ID Address used for advertising */
169 	uint8_t                 id;
170 
171 	/* Advertising handle */
172 	uint8_t                 handle;
173 
174 	/* Current local Random Address */
175 	bt_addr_le_t            random_addr;
176 
177 	/* Current target address */
178 	bt_addr_le_t            target_addr;
179 
180 	ATOMIC_DEFINE(flags, BT_ADV_NUM_FLAGS);
181 
182 #if defined(CONFIG_BT_EXT_ADV)
183 	const struct bt_le_ext_adv_cb *cb;
184 
185 	/* TX Power in use by the controller */
186 	int8_t                    tx_power;
187 #endif /* defined(CONFIG_BT_EXT_ADV) */
188 
189 	struct k_work_delayable	lim_adv_timeout_work;
190 
191 	/** The options used to set the parameters for this advertising set
192 	 * @ref bt_le_adv_param
193 	 */
194 	uint32_t options;
195 };
196 
197 enum {
198 	/** Periodic Advertising Sync has been created in the host. */
199 	BT_PER_ADV_SYNC_CREATED,
200 
201 	/** Periodic Advertising Sync is established and can be terminated */
202 	BT_PER_ADV_SYNC_SYNCED,
203 
204 	/** Periodic Advertising Sync is attempting to create sync */
205 	BT_PER_ADV_SYNC_SYNCING,
206 
207 	/** Periodic Advertising Sync is attempting to create sync using
208 	 *  Advertiser List
209 	 */
210 	BT_PER_ADV_SYNC_SYNCING_USE_LIST,
211 
212 	/** Periodic Advertising Sync established with reporting disabled */
213 	BT_PER_ADV_SYNC_RECV_DISABLED,
214 
215 	/** Constant Tone Extension for Periodic Advertising has been enabled
216 	 * in the Controller.
217 	 */
218 	BT_PER_ADV_SYNC_CTE_ENABLED,
219 
220 	BT_PER_ADV_SYNC_NUM_FLAGS,
221 };
222 
223 struct bt_le_per_adv_sync {
224 	/** Periodic Advertiser Address */
225 	bt_addr_le_t addr;
226 
227 	/** Advertiser SID */
228 	uint8_t sid;
229 
230 	/** Sync handle */
231 	uint16_t handle;
232 
233 	/** Periodic advertising interval (N * 1.25 ms) */
234 	uint16_t interval;
235 
236 	/** Periodic advertising advertiser clock accuracy (ppm) */
237 	uint16_t clock_accuracy;
238 
239 	/** Advertiser PHY */
240 	uint8_t phy;
241 
242 #if defined(CONFIG_BT_DF_CONNECTIONLESS_CTE_RX)
243 	/**
244 	 * @brief Bitfield with allowed CTE types.
245 	 *
246 	 *  Allowed values are defined by @ref bt_df_cte_type, except BT_DF_CTE_TYPE_NONE.
247 	 */
248 	uint8_t cte_types;
249 #endif /* CONFIG_BT_DF_CONNECTIONLESS_CTE_RX */
250 
251 #if CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0
252 	/** Reassembly buffer for advertising reports */
253 	struct net_buf_simple reassembly;
254 
255 	/** Storage for the reassembly buffer */
256 	uint8_t reassembly_data[CONFIG_BT_PER_ADV_SYNC_BUF_SIZE];
257 #endif /* CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 */
258 
259 	/** True if the following periodic adv reports up to and
260 	 * including the next complete one should be dropped
261 	 */
262 	bool report_truncated;
263 
264 	/** Flags */
265 	ATOMIC_DEFINE(flags, BT_PER_ADV_SYNC_NUM_FLAGS);
266 
267 #if defined(CONFIG_BT_PER_ADV_SYNC_RSP)
268 	/** Number of subevents */
269 	uint8_t num_subevents;
270 
271 	/** Subevent interval (N * 1.25ms) */
272 	uint8_t subevent_interval;
273 
274 	/** Response slot delay (N * 1.25ms) */
275 	uint8_t response_slot_delay;
276 
277 	/** Response slot spacing (N * 1.25ms) */
278 	uint8_t response_slot_spacing;
279 #endif /* CONFIG_BT_PER_ADV_SYNC_RSP */
280 };
281 
282 struct bt_dev_le {
283 	/* LE features */
284 	uint8_t features[BT_LE_LOCAL_SUPPORTED_FEATURES_SIZE];
285 	/* LE states */
286 	uint64_t			states;
287 
288 #if defined(CONFIG_BT_CONN)
289 	/* Controller buffer information */
290 	uint16_t		mtu;
291 	struct k_sem		pkts;
292 	uint16_t		acl_mtu;
293 	struct k_sem		acl_pkts;
294 #endif /* CONFIG_BT_CONN */
295 #if defined(CONFIG_BT_ISO)
296 	uint16_t		iso_mtu;
297 	uint8_t			iso_limit;
298 	struct k_sem		iso_pkts;
299 #endif /* CONFIG_BT_ISO */
300 #if defined(CONFIG_BT_BROADCASTER)
301 	uint16_t max_adv_data_len;
302 #endif /* CONFIG_BT_BROADCASTER */
303 
304 #if defined(CONFIG_BT_SMP)
305 	/* Size of the controller resolving list */
306 	uint8_t                    rl_size;
307 	/* Number of entries in the resolving list. rl_entries > rl_size
308 	 * means that host-side resolving is used.
309 	 */
310 	uint8_t                    rl_entries;
311 #endif /* CONFIG_BT_SMP */
312 	/* List of `struct bt_conn` that have either pending data to send, or
313 	 * something to process (e.g. a disconnection event).
314 	 *
315 	 * Each element in this list contains a reference to its `conn` object.
316 	 */
317 	sys_slist_t		conn_ready;
318 };
319 
320 struct bt_dev_br {
321 	/* Max controller's acceptable ACL packet length */
322 	uint16_t         mtu;
323 	struct k_sem  pkts;
324 	uint16_t         esco_pkt_type;
325 };
326 
327 /* The theoretical max for these is 8 and 64, but there's no point
328  * in allocating the full memory if we only support a small subset.
329  * These values must be updated whenever the host implementation is
330  * extended beyond the current values.
331  */
332 #define BT_DEV_VS_FEAT_MAX  1
333 #define BT_DEV_VS_CMDS_MAX  2
334 
335 /* State tracking for the local Bluetooth controller */
336 struct bt_dev {
337 	/* Local Identity Address(es) */
338 	bt_addr_le_t            id_addr[CONFIG_BT_ID_MAX];
339 	uint8_t                    id_count;
340 
341 	struct bt_conn_le_create_param create_param;
342 
343 #if !defined(CONFIG_BT_EXT_ADV)
344 	/* Legacy advertiser */
345 	struct bt_le_ext_adv    adv;
346 #else
347 	/* Pointer to reserved advertising set */
348 	struct bt_le_ext_adv    *adv;
349 #if defined(CONFIG_BT_CONN) && (CONFIG_BT_EXT_ADV_MAX_ADV_SET > 1)
350 	/* When supporting multiple concurrent connectable advertising sets
351 	 * with multiple identities, we need to know the identity of
352 	 * the terminating advertising set to identify the connection object.
353 	 * The identity of the advertising set is determined by its
354 	 * advertising handle, which is part of the
355 	 * LE Set Advertising Set Terminated event which is always sent
356 	 * _after_ the LE Enhanced Connection complete event.
357 	 * Therefore we need cache this event until its identity is known.
358 	 */
359 	struct {
360 		bool valid;
361 		struct bt_hci_evt_le_enh_conn_complete evt;
362 	} cached_conn_complete[MIN(CONFIG_BT_MAX_CONN,
363 				CONFIG_BT_EXT_ADV_MAX_ADV_SET)];
364 #endif
365 #endif
366 	/* Current local Random Address */
367 	bt_addr_le_t            random_addr;
368 	uint8_t                    adv_conn_id;
369 
370 	/* Controller version & manufacturer information */
371 	uint8_t			hci_version;
372 	uint8_t			lmp_version;
373 	uint16_t			hci_revision;
374 	uint16_t			lmp_subversion;
375 	uint16_t			manufacturer;
376 
377 	/* LMP features (pages 0, 1, 2) */
378 	uint8_t			features[LMP_FEAT_PAGES_COUNT][8];
379 
380 	/* Supported commands */
381 	uint8_t			supported_commands[64];
382 
383 #if defined(CONFIG_BT_HCI_VS)
384 	/* Vendor HCI support */
385 	uint8_t                    vs_features[BT_DEV_VS_FEAT_MAX];
386 	uint8_t                    vs_commands[BT_DEV_VS_CMDS_MAX];
387 #endif
388 
389 	struct k_work           init;
390 
391 	ATOMIC_DEFINE(flags, BT_DEV_NUM_FLAGS);
392 
393 	/* LE controller specific features */
394 	struct bt_dev_le	le;
395 
396 #if defined(CONFIG_BT_CLASSIC)
397 	/* BR/EDR controller specific features */
398 	struct bt_dev_br	br;
399 #endif
400 
401 	/* Number of commands controller can accept */
402 	struct k_sem		ncmd_sem;
403 
404 	/* Last sent HCI command */
405 	struct net_buf		*sent_cmd;
406 
407 	/* Queue for incoming HCI events & ACL data */
408 	sys_slist_t rx_queue;
409 
410 	/* Queue for outgoing HCI commands */
411 	struct k_fifo		cmd_tx_queue;
412 
413 	const struct device *hci;
414 
415 #if defined(CONFIG_BT_PRIVACY)
416 	/* Local Identity Resolving Key */
417 	uint8_t			irk[CONFIG_BT_ID_MAX][16];
418 
419 #if defined(CONFIG_BT_RPA_SHARING)
420 	/* Only 1 RPA per identity */
421 	bt_addr_t		rpa[CONFIG_BT_ID_MAX];
422 #endif
423 
424 	/* Work used for RPA rotation */
425 	struct k_work_delayable rpa_update;
426 
427 	/* The RPA timeout value. */
428 	uint16_t rpa_timeout;
429 #endif
430 
431 	/* Local Name */
432 #if defined(CONFIG_BT_DEVICE_NAME_DYNAMIC)
433 	char			name[CONFIG_BT_DEVICE_NAME_MAX + 1];
434 #endif
435 #if defined(CONFIG_BT_DEVICE_APPEARANCE_DYNAMIC)
436 	/* Appearance Value */
437 	uint16_t		appearance;
438 #endif
439 };
440 
441 extern struct bt_dev bt_dev;
442 extern const struct bt_conn_auth_cb *bt_auth;
443 extern sys_slist_t bt_auth_info_cbs;
444 enum bt_security_err bt_security_err_get(uint8_t hci_err);
445 
446 int bt_hci_recv(const struct device *dev, struct net_buf *buf);
447 
448 /* Data type to store state related with command to be updated
449  * when command completes successfully.
450  */
451 struct bt_hci_cmd_state_set {
452 	/* Target memory to be updated */
453 	atomic_t *target;
454 	/* Bit number to be updated in target memory */
455 	int bit;
456 	/* Value to determine if enable or disable bit */
457 	bool val;
458 };
459 
460 /* Set command state related with the command buffer */
461 void bt_hci_cmd_state_set_init(struct net_buf *buf,
462 			       struct bt_hci_cmd_state_set *state,
463 			       atomic_t *target, int bit, bool val);
464 
465 int bt_hci_disconnect(uint16_t handle, uint8_t reason);
466 
467 bool bt_le_conn_params_valid(const struct bt_le_conn_param *param);
468 int bt_le_set_data_len(struct bt_conn *conn, uint16_t tx_octets, uint16_t tx_time);
469 int bt_le_set_default_phy(uint8_t all_phys, uint8_t pref_tx_phy, uint8_t pref_rx_phy);
470 int bt_le_set_phy(struct bt_conn *conn, uint8_t all_phys,
471 		  uint8_t pref_tx_phy, uint8_t pref_rx_phy, uint8_t phy_opts);
472 uint8_t bt_get_phy(uint8_t hci_phy);
473 /**
474  * @brief Convert CTE type value from HCI format to @ref bt_df_cte_type format.
475  *
476  * @param hci_cte_type   CTE type in an HCI format.
477  *
478  * @return CTE type (@ref bt_df_cte_type).
479  */
480 int bt_get_df_cte_type(uint8_t hci_cte_type);
481 
482 int bt_le_create_conn(const struct bt_conn *conn);
483 int bt_le_create_conn_cancel(void);
484 int bt_le_create_conn_synced(const struct bt_conn *conn, const struct bt_le_ext_adv *adv,
485 			     uint8_t subevent);
486 
487 const bt_addr_le_t *bt_lookup_id_addr(uint8_t id, const bt_addr_le_t *addr);
488 
489 int bt_send(struct net_buf *buf);
490 
491 /* Don't require everyone to include keys.h */
492 struct bt_keys;
493 void bt_id_add(struct bt_keys *keys);
494 void bt_id_del(struct bt_keys *keys);
495 
496 struct bt_keys *bt_id_find_conflict(struct bt_keys *candidate);
497 
498 int bt_setup_random_id_addr(void);
499 int bt_setup_public_id_addr(void);
500 
501 void bt_finalize_init(void);
502 
503 void bt_hci_host_num_completed_packets(struct net_buf *buf);
504 
505 /* HCI event handlers */
506 void bt_hci_pin_code_req(struct net_buf *buf);
507 void bt_hci_link_key_notify(struct net_buf *buf);
508 void bt_hci_link_key_req(struct net_buf *buf);
509 void bt_hci_io_capa_resp(struct net_buf *buf);
510 void bt_hci_io_capa_req(struct net_buf *buf);
511 void bt_hci_ssp_complete(struct net_buf *buf);
512 void bt_hci_user_confirm_req(struct net_buf *buf);
513 void bt_hci_user_passkey_notify(struct net_buf *buf);
514 void bt_hci_user_passkey_req(struct net_buf *buf);
515 void bt_hci_auth_complete(struct net_buf *buf);
516 
517 /* Common HCI event handlers */
518 void bt_hci_le_enh_conn_complete(struct bt_hci_evt_le_enh_conn_complete *evt);
519 
520 /* Scan HCI event handlers */
521 void bt_hci_le_adv_report(struct net_buf *buf);
522 void bt_hci_le_scan_timeout(struct net_buf *buf);
523 void bt_hci_le_adv_ext_report(struct net_buf *buf);
524 void bt_hci_le_per_adv_sync_established(struct net_buf *buf);
525 void bt_hci_le_per_adv_sync_established_v2(struct net_buf *buf);
526 void bt_hci_le_per_adv_report(struct net_buf *buf);
527 void bt_hci_le_per_adv_report_v2(struct net_buf *buf);
528 void bt_hci_le_per_adv_sync_lost(struct net_buf *buf);
529 void bt_hci_le_biginfo_adv_report(struct net_buf *buf);
530 void bt_hci_le_df_connectionless_iq_report(struct net_buf *buf);
531 void bt_hci_le_vs_df_connectionless_iq_report(struct net_buf *buf);
532 void bt_hci_le_past_received(struct net_buf *buf);
533 void bt_hci_le_past_received_v2(struct net_buf *buf);
534 
535 /* CS HCI event handlers */
536 void bt_hci_le_cs_read_remote_supported_capabilities_complete(struct net_buf *buf);
537 void bt_hci_le_cs_read_remote_fae_table_complete(struct net_buf *buf);
538 void bt_hci_le_cs_config_complete_event(struct net_buf *buf);
539 void bt_hci_le_cs_security_enable_complete(struct net_buf *buf);
540 void bt_hci_le_cs_procedure_enable_complete(struct net_buf *buf);
541 void bt_hci_le_cs_subevent_result(struct net_buf *buf);
542 void bt_hci_le_cs_subevent_result_continue(struct net_buf *buf);
543 void bt_hci_le_cs_test_end_complete(struct net_buf *buf);
544 
545 /* Adv HCI event handlers */
546 void bt_hci_le_adv_set_terminated(struct net_buf *buf);
547 void bt_hci_le_scan_req_received(struct net_buf *buf);
548 
549 /* BR/EDR HCI event handlers */
550 void bt_hci_conn_req(struct net_buf *buf);
551 void bt_hci_conn_complete(struct net_buf *buf);
552 
553 
554 void bt_hci_inquiry_complete(struct net_buf *buf);
555 void bt_hci_inquiry_result_with_rssi(struct net_buf *buf);
556 void bt_hci_extended_inquiry_result(struct net_buf *buf);
557 void bt_hci_remote_name_request_complete(struct net_buf *buf);
558 
559 void bt_hci_read_remote_features_complete(struct net_buf *buf);
560 void bt_hci_read_remote_ext_features_complete(struct net_buf *buf);
561 void bt_hci_role_change(struct net_buf *buf);
562 void bt_hci_synchronous_conn_complete(struct net_buf *buf);
563 
564 void bt_hci_le_df_connection_iq_report(struct net_buf *buf);
565 void bt_hci_le_vs_df_connection_iq_report(struct net_buf *buf);
566 void bt_hci_le_df_cte_req_failed(struct net_buf *buf);
567 
568 void bt_hci_le_per_adv_subevent_data_request(struct net_buf *buf);
569 void bt_hci_le_per_adv_response_report(struct net_buf *buf);
570 
571 int bt_hci_read_remote_version(struct bt_conn *conn);
572 int bt_hci_le_read_remote_features(struct bt_conn *conn);
573 int bt_hci_le_read_max_data_len(uint16_t *tx_octets, uint16_t *tx_time);
574 
575 bool bt_drv_quirk_no_auto_dle(void);
576 
577 void bt_tx_irq_raise(void);
578