// Copyright 2018 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include "s905d2-gpu.h"
#include "s912-gpu.h"
#include "t931-gpu.h"
#include <ddk/binding.h>
#include <ddk/debug.h>
#include <ddk/device.h>
#include <ddk/driver.h>
#include <ddk/platform-defs.h>
#include <ddk/protocol/iommu.h>
#include <ddk/protocol/platform-device-lib.h>
#include <ddk/protocol/platform/bus.h>
#include <ddk/protocol/platform/device.h>
#include <fuchsia/hardware/gpu/clock/c/fidl.h>
#include <hw/reg.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <zircon/process.h>
#include <zircon/syscalls.h>

zx_status_t aml_gp0_init(aml_gpu_t* gpu);
void aml_gp0_release(aml_gpu_t* gpu);

static int32_t current_clk_source;

static void aml_gpu_set_clk_freq_source(aml_gpu_t* gpu, int32_t clk_source) {

    if (current_clk_source == clk_source) {
        return;
    }

    aml_gpu_block_t* gpu_block = gpu->gpu_block;
    GPU_INFO("Setting clock source to %d: %d\n", clk_source, gpu_block->gpu_clk_freq[clk_source]);
    uint32_t current_clk_cntl = READ32_HIU_REG(gpu_block->hhi_clock_cntl_offset);
    uint32_t enabled_mux = current_clk_cntl & (1 << FINAL_MUX_BIT_SHIFT);
    uint32_t new_mux = enabled_mux == 0;
    uint32_t mux_shift = new_mux ? 16 : 0;

    // clear existing values
    current_clk_cntl &= ~(CLOCK_MUX_MASK << mux_shift);
    // set the divisor, enable & source for the unused mux
    current_clk_cntl |= CALCULATE_CLOCK_MUX(true,
                                            gpu_block->gpu_clk_freq[clk_source], 1)
                        << mux_shift;

    // Write the new values to the unused mux
    WRITE32_HIU_REG(gpu_block->hhi_clock_cntl_offset, current_clk_cntl);
    zx_nanosleep(zx_deadline_after(ZX_USEC(10)));

    // Toggle current mux selection
    current_clk_cntl ^= (1 << FINAL_MUX_BIT_SHIFT);

    // Select the unused input mux
    WRITE32_HIU_REG(gpu_block->hhi_clock_cntl_offset, current_clk_cntl);

    current_clk_source = clk_source;
}

static void aml_gpu_set_initial_clk_freq_source(aml_gpu_t* gpu, int32_t clk_source) {
    aml_gpu_block_t* gpu_block = gpu->gpu_block;
    uint32_t current_clk_cntl = READ32_HIU_REG(gpu_block->hhi_clock_cntl_offset);
    uint32_t enabled_mux = (current_clk_cntl & (1 << FINAL_MUX_BIT_SHIFT)) != 0;
    uint32_t mux_shift = enabled_mux ? 16 : 0;

    if (current_clk_cntl & (1 << (mux_shift + CLK_ENABLED_BIT_SHIFT))) {
        aml_gpu_set_clk_freq_source(gpu, clk_source);
    } else {
        GPU_INFO("Setting initial clock source to %d: %d\n", clk_source, gpu_block->gpu_clk_freq[clk_source]);
        // Switching the final dynamic mux from a disabled source to an enabled
        // source doesn't work. If the current clock source is disabled, then
        // enable it instead of switching.
        current_clk_cntl &= ~(CLOCK_MUX_MASK << mux_shift);
        current_clk_cntl |= CALCULATE_CLOCK_MUX(true,
                                                gpu_block->gpu_clk_freq[clk_source], 1)
                            << mux_shift;

        // Write the new values to the existing mux.
        WRITE32_HIU_REG(gpu_block->hhi_clock_cntl_offset, current_clk_cntl);
        zx_nanosleep(zx_deadline_after(ZX_USEC(10)));
        current_clk_source = clk_source;
    }
}

static void aml_gpu_init(aml_gpu_t* gpu) {
    uint32_t temp;
    aml_gpu_block_t* gpu_block = gpu->gpu_block;

    temp = READ32_PRESET_REG(gpu_block->reset0_mask_offset);
    temp &= ~(1 << 20);
    WRITE32_PRESET_REG(gpu_block->reset0_mask_offset, temp);

    temp = READ32_PRESET_REG(gpu_block->reset0_level_offset);
    temp &= ~(1 << 20);
    WRITE32_PRESET_REG(gpu_block->reset0_level_offset, temp);

    temp = READ32_PRESET_REG(gpu_block->reset2_mask_offset);
    temp &= ~(1 << 14);
    WRITE32_PRESET_REG(gpu_block->reset2_mask_offset, temp);

    temp = READ32_PRESET_REG(gpu_block->reset2_level_offset);
    temp &= ~(1 << 14);
    WRITE32_PRESET_REG(gpu_block->reset2_level_offset, temp);

    // Currently the index 2 corresponds to the default
    // value of GPU clock freq which is 500Mhz.
    // In future, the GPU driver in garnet
    // can make an IOCTL to set the default freq
    aml_gpu_set_initial_clk_freq_source(gpu, 2);

    temp = READ32_PRESET_REG(gpu_block->reset0_level_offset);
    temp |= 1 << 20;
    WRITE32_PRESET_REG(gpu_block->reset0_level_offset, temp);

    temp = READ32_PRESET_REG(gpu_block->reset2_level_offset);
    temp |= 1 << 14;
    WRITE32_PRESET_REG(gpu_block->reset2_level_offset, temp);

    WRITE32_GPU_REG(PWR_KEY, 0x2968A819);
    WRITE32_GPU_REG(PWR_OVERRIDE1, 0xfff | (0x20 << 16));
}

static void aml_gpu_release(void* ctx) {
    aml_gpu_t* gpu = ctx;
    aml_gp0_release(gpu);
    mmio_buffer_release(&gpu->hiu_buffer);
    mmio_buffer_release(&gpu->preset_buffer);
    mmio_buffer_release(&gpu->gpu_buffer);
    zx_handle_close(gpu->bti);
    free(gpu);
}

static zx_status_t aml_gpu_get_protocol(void* ctx, uint32_t proto_id, void* out_proto) {

    aml_gpu_t* gpu = ctx;
    pdev_protocol_t* gpu_proto = out_proto;

    // Forward the underlying ops.
    gpu_proto->ops = gpu->pdev.ops;
    gpu_proto->ctx = gpu->pdev.ctx;
    return ZX_OK;
}

static zx_status_t aml_gpu_SetFrequencySource(void* ctx, uint32_t clk_source, fidl_txn_t* txn) {
    aml_gpu_t* gpu = ctx;
    if (clk_source >= MAX_GPU_CLK_FREQ) {
        GPU_ERROR("Invalid clock freq source index\n");
        return fuchsia_hardware_gpu_clock_ClockSetFrequencySource_reply(txn, ZX_ERR_NOT_SUPPORTED);
    }
    aml_gpu_set_clk_freq_source(gpu, clk_source);
    return fuchsia_hardware_gpu_clock_ClockSetFrequencySource_reply(txn, ZX_OK);
}

static fuchsia_hardware_gpu_clock_Clock_ops_t fidl_ops = {.SetFrequencySource =
                                                              aml_gpu_SetFrequencySource};

static zx_status_t aml_gpu_message(void* ctx, fidl_msg_t* msg, fidl_txn_t* txn) {
    return fuchsia_hardware_gpu_clock_Clock_dispatch(ctx, txn, msg, &fidl_ops);
}

static zx_protocol_device_t aml_gpu_protocol = {
    .version = DEVICE_OPS_VERSION,
    .release = aml_gpu_release,
    .get_protocol = aml_gpu_get_protocol,
    .message = aml_gpu_message,
};

static zx_status_t aml_gpu_bind(void* ctx, zx_device_t* parent) {
    zx_status_t status;
    aml_gpu_t* gpu = calloc(1, sizeof(aml_gpu_t));
    if (!gpu) {
        return ZX_ERR_NO_MEMORY;
    }

    if ((status = device_get_protocol(parent, ZX_PROTOCOL_PDEV, &gpu->pdev)) != ZX_OK) {
        GPU_ERROR("ZX_PROTOCOL_PDEV not available\n");
        goto fail;
    }

    status = pdev_get_bti(&gpu->pdev, 0, &gpu->bti);
    if (status != ZX_OK) {
        GPU_ERROR("could not get BTI handle: %d\n", status);
        return status;
    }

    status = pdev_map_mmio_buffer2(&gpu->pdev, MMIO_GPU, ZX_CACHE_POLICY_UNCACHED_DEVICE,
                                  &gpu->gpu_buffer);
    if (status != ZX_OK) {
        GPU_ERROR("pdev_map_mmio_buffer failed\n");
        goto fail;
    }

    status = pdev_map_mmio_buffer2(&gpu->pdev, MMIO_HIU, ZX_CACHE_POLICY_UNCACHED_DEVICE,
                                  &gpu->hiu_buffer);
    if (status != ZX_OK) {
        GPU_ERROR("pdev_map_mmio_buffer failed\n");
        goto fail;
    }

    status = pdev_map_mmio_buffer2(&gpu->pdev, MMIO_PRESET, ZX_CACHE_POLICY_UNCACHED_DEVICE,
                                  &gpu->preset_buffer);
    if (status != ZX_OK) {
        GPU_ERROR("pdev_map_mmio_buffer failed\n");
        goto fail;
    }

    pdev_device_info_t info;
    status = pdev_get_device_info(&gpu->pdev, &info);
    if (status != ZX_OK) {
        GPU_ERROR("pdev_get_device_info failed\n");
        goto fail;
    }

    switch (info.pid) {
    case PDEV_PID_AMLOGIC_S912:
        gpu->gpu_block = &s912_gpu_blocks;
        break;
    case PDEV_PID_AMLOGIC_S905D2:
        gpu->gpu_block = &s905d2_gpu_blocks;
        break;
    case PDEV_PID_AMLOGIC_T931:
        gpu->gpu_block = &t931_gpu_blocks;
        break;
    default:
        GPU_ERROR("unsupported SOC PID %u\n", info.pid);
        goto fail;
    }

    if (info.pid == PDEV_PID_AMLOGIC_S905D2) {
        status = aml_gp0_init(gpu);
        if (status != ZX_OK) {
            GPU_ERROR("aml_gp0_init failed: %d\n", status);
            goto fail;
        }
    }

    aml_gpu_init(gpu);

    zx_device_prop_t props[] = {
        {BIND_PROTOCOL, 0, ZX_PROTOCOL_PDEV},
        {BIND_PLATFORM_DEV_VID, 0, PDEV_VID_GENERIC},
        {BIND_PLATFORM_DEV_PID, 0, PDEV_PID_GENERIC},
        {BIND_PLATFORM_DEV_DID, 0, PDEV_DID_ARM_MALI},
    };

    device_add_args_t args = {
        .version = DEVICE_ADD_ARGS_VERSION,
        .name = "aml-gpu",
        .ctx = gpu,
        .ops = &aml_gpu_protocol,
        .props = props,
        .prop_count = countof(props),
        .proto_id = ZX_PROTOCOL_GPU_THERMAL,
    };

    status = device_add(parent, &args, &gpu->zxdev);
    if (status != ZX_OK) {
        goto fail;
    }

    return ZX_OK;

fail:
    aml_gpu_release(gpu);
    return status;
}

static zx_driver_ops_t aml_gpu_driver_ops = {
    .version = DRIVER_OPS_VERSION,
    .bind = aml_gpu_bind,
};

ZIRCON_DRIVER_BEGIN(aml_gpu, aml_gpu_driver_ops, "zircon", "0.1", 6)
    BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_PDEV),
    BI_ABORT_IF(NE, BIND_PLATFORM_DEV_VID, PDEV_VID_AMLOGIC),
    BI_ABORT_IF(NE, BIND_PLATFORM_DEV_DID, PDEV_DID_ARM_MALI_INIT),
    // we support multiple SOC variants
    BI_MATCH_IF(EQ, BIND_PLATFORM_DEV_PID, PDEV_PID_AMLOGIC_S912),
    BI_MATCH_IF(EQ, BIND_PLATFORM_DEV_PID, PDEV_PID_AMLOGIC_S905D2),
    BI_MATCH_IF(EQ, BIND_PLATFORM_DEV_PID, PDEV_PID_AMLOGIC_T931),
ZIRCON_DRIVER_END(aml_gpu)